System Startup, Configuration, and Shutdown Reference Manual: HP e3000 MPE/iX Computer Systems
MPE documents | |
 Complete PDF | |
| Table of Contents | |
| Glossary | |
| Index | |
| E0802 Edition 7 ♥ | |
| E0201 Edition 6 | |
| E0796 Edition 5 |
Table of Contents
- Preface
- 1 Introduction
- 2 Initiating System Activity
- 3 System Startup Functions
- 4 Using the System Generator (SYSGEN)
- Entering the SYSGEN Global Module
- Using the Help Facility in SYSGEN's Global Module
- Using First-Level (Global Module) Commands
- SYSGEN Command Syntax
- Halting SYSGEN Command Actions
- Specifying the Base Group
- Confirming Potentially Serious Actions
- Showing the State of Configurators
- Activating the Configurators
- Clearing Configuration Changes
- Saving Configuration Changes
- Generating a System Load Tape
- Redirecting SYSGEN Input and Output
- Exiting SYSGEN
- 5 Modifying Input/Output (I/O) Configurations
- I/O Paths
- Using the SYSGEN I/O Configurator
- Using the IOCONFIG Utility
- Adding a Device with IOCONFIG
- Listing One or More Devices with IOCONFIG
- Deleting a Device with IOCONFIG
- Adding a Device Class with IOCONFIG
- Modifying a Device Class with IOCONFIG
- Listing One or More Device Classes with IOCONFIG
- Deleting a Device Class with IOCONFIG
- Configuring a Device Adapter with IOCONFIG
- Listing an I/O Path with IOCONFIG
- Deleting an I/O Path with IOCONFIG
- Updating the Device Class Association Table with IOCONFIG
- 6 Modifying Logging Configurations
- 7 Modifying Miscellaneous Configuration Elements
- Entering the MISC Configurator
- Using the MISC Configurator Help Facility
- Showing Values of Current Configurable Items
- Deleting Global Resource Identification Numbers (RIN)
- Configuring Job-Related Limits
- Displaying Allocated Global RINs
- Setting Resource Allocations
- Setting Session-Related Limits
- Setting Sizes of Native Mode and Compatibility Mode Stacks
- Setting Strings and String Parameters
- Clearing MISC Configuration Changes
- Holding and Saving Configuration Changes
- Entering an MPE Command from the MISC Configurator
- Exiting the MISC Configurator
- 8 Modifying System File Configurations
- Entering the SYSFILE Configurator
- Using the SYSFILE Configurator Help Facility
- Using SYSFILE Configurator Commands
- Displaying Current File Information
- Deleting Objects from the SYSGEN Tape
- Replacing Objects on the SYSGEN Tape
- Using a Segmented Library File as CMSL
- Listing CMSL Contents
- Clearing SYSFILE Configurator Changes
- Holding and Saving Configuration Changes
- Entering an MPE Command from the SYSFILE Configurator
- Exiting the SYSFILE Configurator
- 9 Halting System Activity
- A Using the Access Port (AP)
- Configuring the Console
- Entering Control Mode and Using the Command Interpreter
- Interpreting the System Status Line
- Using Access Port Commands
- Using the AP Help Facility
- Returning from Control Mode to Console Mode
- Configuring the Access Port
- Enabling Remote Console Access
- Sending Messages to Both Consoles
- Disabling Remote Console Access
- Disconnecting the Remote Line
- Connecting the Remote Support Modem to a Session Port
- Enabling the SPU Hex Status Display
- Disabling the SPU Hex Status Display
- Hard Resetting the SPU
- Transferring Control (Soft Reset)
- Testing the AP
- Using Control Commands
- Interpreting AP Error and Informational Messages
- B Startup, Dump, and Shutdown Listings
- C Reading Stable Storage and Nonvolatile Memory
- D Default Configurations Used by INSTALL and UPDATE
- E Verifying Attached Devices
- F Adding Peripherals to a System
- G UPS and UPS Monitor/iX Software
- Advanced UPS Monitor/IX Features
- Configuring a UPS Device
- To Configure the First UPS on a Series 9X8, 9X9, N-Class, or A-Class
- To Configure a UPS Connected via a DTC Port
- To Use UPS Monitor/iX Software
- System Behavior When AC Power Fails
- System Behavior When AC Power Returns
- To Enable Logging of UPS Activity
- To Review UPS Activity Recorded in the System Log File
- H Using the Guardian Service Processor (GSP)
- GSP Modes
- Configuring the GSP
- Operator / Administrator summary
- Console and remote port configuration (CA, ER)
- Configuring the Remote Port for Predictive Support
- GSP LAN configuration (LC)
- Display a list of GSP connected users (WHO)
- Security Options & access control (SO)
- Remote Power Control (PC)
- Diagnostic and/or Reset of GSP (XD)
- Upgrade the GSP Firmware (XU)
- Virtual Front Panel Display (VFP)
- Accessing the Secure Web Console
- Glossary
- Index
- C-1 Stable Storage Contents
- C-2 NVM Contents
- 2-1 AP Reset Commands
- 3-1 ISL Commands
- 3-2 Execution of SYSSTART File Modules
- 3-3 Utility Options
- 3-4 Summary of System Startup Function
- 4-1 Using First-Level Commands
- 4-2 Actions Performed by Command File Example
- 4-3 Actions Performed by Command File LISTIT
- 5-1 I/O Configurator Command Matrix
- 5-2 I/O Configurator List Commands
- 5-3 I/O Configurator Add Commands
- 5-4 I/O Configurator Modify Commands
- 5-5 I/O Configurator Delete Commands
- 5-6 IOCONFIG Commands
- 7-1 Minimum and Maximum Values for JOB Command Parameters
- 7-2 Minimum and Maximum Values for RESOURCE Parameters
- 7-3 Minimum and Maximum Values for SESSION Parameters
- 7-4 Min. and Max. Values for STACK Parameters
- 7-5 Default Values for SYSTEM Parameters
- 8-1 SYSFILE Configurator Command Matrix
- A-1 Status Line Display
- A-2 Access Port Commands
- C-1 Codes for ISL Utility Names
- D-1 Default Configurations for the HP e3000
- G-1 Title not available (To Configure the First UPS on a Series 9X8, 9X9, N-Class, or A-Class)
- 2-1 Resetting an N-CLass System Using GSP Commands:
Autoboot Disabled - 2-2 Resetting an N class System Using AP/GSP Commands
Autoboot Enabled - 2-3 Autobooting an N-Class System
- 2-4 Interrupting Autobooting an N-Class System.
- 2-5 Boot Command Options for an N-Class System
- 2-6 A System's Response to an Improper Boot Path
- 2-7 Interactively Booting an N-Class System
- 2-8 Bypassing the Disabled Autoboot Setting When Booting a System
- 2-9 System Startup Procedure
- 3-1 Using the HELP Command
- 3-2 Listing Available ISL Utilities
- 3-3 Displaying an Example of ISL Settings
- 3-4 A Properly Formatted SYSSTART File
- 3-5 Example of a Hard Reset from an N-Class System
- 3-6 Example of a Soft Reset on an N-Class System
- 3-7 Dumping the System
- 4-1 Activating SYSGEN's Global Module
- 4-2 SYSGEN's Global Module Help Facility
- 4-3 SYSGEN Global Module HELP ALL
- 4-4 PERMYES OFF Action
- 4-5 PERMYES ON Action
- 4-6 Using the Global Module SHOW ALL
- 4-7 Activating a SYSGEN Configurator
- 4-8 Accessing a Configuration Group
- 4-9 Command File (SYSGENON) Created With EDITOR
- 4-10 SYSGEN Command File (LISTIT)
- 5-1 Starting the I/O Configurator
- 5-2 I/O Configurator HELP ALL Command Output
- 5-3 I/O Configurator Command HELP Output
- 5-4 Listing Configured Devices: N-Class System
- 6-1 Activating the LOG Configurator
- 6-2 LOG Configurator Help
- 6-3 LOG Configurator HELP ALL
- 6-4 Showing User Logging Processes
- 6-5 Showing All Configured Values
- 7-1 Activating the MISC Configurator
- 7-2 MISC Configurator HELP
- 7-3 MISC Configurator HELP ALL Output
- 7-4 MISC Configurator SHOW ALL Output
- 7-5 MISC Configurator SHOW Output
- 8-1 Activating the SYSFILE Configurator
- 8-2 SYSFILE Configurator HELP
- 8-3 SYSFILE Configurator HELP ALL
- 8-4 SYSFILE Configurator HELP ABOOT
- 8-5 SYSFILE Configurator SHOW ALL Output
- E-1 Mapper2
- G-1 Sample Console Messages from UPS Monitor/iX
- G-2 Sample System Log Configuration
|
Index |
Preface |