HPlogo System Startup, Configuration, and Shutdown Reference Manual > Chapter 4 Using the System Generator (SYSGEN)

Showing the State of Configurators

MPE documents

Complete PDF
Table of Contents
Glossary
Index

E0802 Edition 7 ♥
E0201 Edition 6
E0796 Edition 5

The SHOW command (abbreviated SH) displays the current state of the SYSGEN global facilities.

SHOW has the following syntax: 

        SHOW    [TYPE =   BASEGROUP    ]
                        [ NEWGROUP     ]
                        [ VERSION      ]
                        [ PERMYES      ]
                        [ CONFIGURATOR ]
                        [ ALL          ]
                [DEST =   OFFLINE      ]
BASEGROUP lists the name of the current working configuration's base group.

NEWGROUP lists the name of the current new configuration group.

VERSION displays the version number of SYSGEN. The version number is also displayed in the SYSGEN banner.

PERMYES shows whether SYSGEN prompts you for confirmation before performing potentially serious commands.

CONFIGURATOR lists all modified configurators.

ALL provides a combined listing of the configuration information provided by the TYPE parameters defined above.

OFFLINE sends output to SYSGEN's listing file, SYSGLIST. Using OFFLINE in the SHOW command line does not immediately generate a printout. The information is sent to SYSGLIST until you either enter the OCLOSE command or exit SYSGEN. Exiting SYSGEN or using OCLOSE closes SYSGLIST and prints the file.

Entering SHOW without TYPE parameters is the same as specifying SHOW ALL. Example 4-6 demonstrates using the SHOW ALL command.

Example 4-6 Using the Global Module SHOW ALL 

   sysgen>SHOW ALL
          base configuration group = CONFIG
          new configuration group =
          SYSGEN version D.01.01 : catalog version D.01.01
          permyes is false--system will have to answer questions
          ** no configurators are modified**



Confirming Potentially Serious Actions

Activating the Configurators