Index

Symbols

$STDINX

formal file designator, Entering the SYSGEN Global Module

$STDLIST

formal file designator, Entering the SYSGEN Global Module

A

A-Class

default configuration, Default Configurations Used by INSTALL and UPDATE

AAUTO

SYSFILE configurator command, Displaying Current File Information

ABOOT

SYSFILE configurator command, Displaying Current File Information, Adding Boot Files

ABORTJOB

MPE/iX command, Running ODE

access port

configuring, Returning from Control Mode to Console Mode

access port (AP), Resetting the System Using the Console

support interface, Resetting the System Using the Console

testing, Transferring Control (Soft Reset)

using, Using the Access Port (AP)

access port commands, Using Access Port Commands

RS, Hard Reset

TC, Soft Reset

Using, Using Access Port Commands

access port(AP)

using, Resetting the System Using the Console

account

SYS, Using the System Generator (SYSGEN)

accounts used to store configuration data, Using the System Generator (SYSGEN)

ACLASS

I/O Configurator command, Adding Objects in SYSGEN

ACMSL

SYSFILE Configurator command, Displaying Current File Information

SYSFILE configurator command, Adding a Segment to the Compatibility Mode Segmented Library (CMSL)

activating the configurators

SYSGEN utility, Activating the Configurators

adding a boot image to the SYSGEN tape, Displaying Current File Information

adding a segment to a temporary copy of the CMSL, Displaying Current File Information

adding an autoboot FILE to the SYSGEN tape, Displaying Current File Information

adding classes in SYSGEN, Adding Objects in SYSGEN

adding devices in SYSGEN, Adding Objects in SYSGEN

adding file names to DUMP to TAPE, Adding File Names to Dump to Tape

adding I/O paths in SYSGEN, Adding Objects in SYSGEN

adding objects to the SYSGEN tape, Displaying Current File Information

ADEV

I/O Configurator command, Adding Objects in SYSGEN

alternate boot paths, I/O Paths Used to Boot a System

analyser cards, Displaying Configured Devices

AP error messages

interpreting, Changing Master Consoles

AP help facility

using, Using Access Port Commands

AP informational messages

interpreting, Changing Master Consoles

AP. See access port, Resetting the System Using the Console

APATH

I/O Configurator command, Adding Objects in SYSGEN

ASPROG

SYSFILE configurator command, Displaying Current File Information, Adding File Names to Dump to Tape

autoboot and autosearch

autoboot, Activating and Deactivating Autoboot and Autosearch Functions

autosearch, Activating and Deactivating Autoboot and Autosearch Functions

boot search, Activating and Deactivating Autoboot and Autosearch Functions

manual, Activating and Deactivating Autoboot and Autosearch Functions

AUTOBOOT command, Testing the System, Activating and Deactivating Autoboot and Autosearch Functions

autoboot file, How System Startup is Carried Out, Autobooting the System

listing current contents, Listing Autoboot File Contents

autoboot flag, Resetting the System Using the Console

enabling and disabling, Activating and Deactivating Autoboot and Autosearch Functions

autoboot images

deleting, Deleting Autoboot Images

replacing, Replacing Autoboot Images

autobooting a Series 925, Autobooting the System

autobooting a system, How System Startup is Carried Out

autoexecute file, How System Startup is Carried Out, Resetting the System Using the Console, Autobooting the System

AUTOSEARCH command, Activating and Deactivating Autoboot and Autosearch Functions

autosearch flag

enabling and disabling, Activating and Deactivating Autoboot and Autosearch Functions

AVOL

I/O Configurator command, Adding Objects in SYSGEN

B

backing up the system, Backing up the System and Retaining the Current Configuration, Using the INSTALL Utility to Recover a Lost System, Back up the System and Retain the Current Configuration, Using the System Generator (SYSGEN)

base configuration group, Using the System Generator (SYSGEN)

see configuration group, Using the System Generator (SYSGEN)

base group

specifying, Specifying the Base Group

base system files, ISL Boot Utilities

BASEGROUP

SYSGEN command, Specifying the Base Group, Holding and Saving Configuration Changes, Adding a Peripheral to Any System

basegroup, Using the System Generator (SYSGEN)

see configuration group, Using the System Generator (SYSGEN)

boot command options, Interrupting an Autobooting System

boot error codes, Interrupting an Autobooting System

boot images

deleting, Deleting Boot Images

replacing, Replacing Boot Images

boot path

improper, Interrupting an Autobooting System

boot paths

alternate, I/O Paths Used to Boot a System

console, I/O Paths Used to Boot a System

primary, I/O Paths Used to Boot a System

boot tape, How System Configuration Is Performed, Using the System Generator (SYSGEN)

boot utilities. See ISL utilities, ISL Boot Utilities

booting sequences, How System Startup is Carried Out

booting the system, The Booting Process

bus converter, Using the SYSGEN I/O Configurator

C

cache, Displaying Configured Devices

central bus, Selecting I/O Paths

see CTB, Selecting I/O Paths

changing the I/O configuration online, Using the IOCONFIG Utility

channel adapter, Selecting I/O Paths

channel I/O bus, Selecting I/O Paths

CIO bus, Selecting I/O Paths

classes

adding in SYSGEN, Adding Objects in SYSGEN

CLEAR

LOG configurator command, Clearing Log Configuration Changes

MISC configurator command, Clearing MISC Configuration Changes

SYSGEN command, Using the System Generator (SYSGEN), Clearing Configuration Changes

clearing configuration changes, Clearing Log Configuration Changes, Clearing MISC Configuration Changes

SYSGEN utility, Clearing Configuration Changes

CMSL, Displaying Current File Information

adding a segment to, Adding a Segment to the Compatibility Mode Segmented Library (CMSL)

replacing a segment of, Replacing a CMSL Segment

see compatibility mode segment library, Displaying Current File Information

co-processor, Displaying Configured Devices

codes for ISL utility names, Reading Nonvolatile Memory (NVM)

command interpreter

using, Entering Control Mode and Using the Command Interpreter

command syntax

SYSGEN utility, SYSGEN Command Syntax

commands

I/O configurator, Viewing the Current Configuration

commands - I/O Configurator

ACLASS, Adding Objects in SYSGEN

ADEV, Adding Objects in SYSGEN

APATH, Adding Objects in SYSGEN

AVOL, Adding Objects in SYSGEN

DCLASS, Deleting Objects in SYSGEN

DDEV, Deleting Objects in SYSGEN

DPATH, Deleting Objects in SYSGEN

DVOL, Deleting Objects in SYSGEN

MADDRESS, Changing Configurations in SYSGEN

MCLASS, Changing Configurations in SYSGEN

MDEV, Changing Configurations in SYSGEN

MPATH, Changing Configurations in SYSGEN

MVOL, Changing Configurations in SYSGEN

commands - I/O configurator

HELP, Getting Help with I/O Configurator Commands

LCLASS, Viewing the Current Configuration

LDEV, Viewing the Current Configuration

LPATH, Viewing the Current Configuration

LVOL, Viewing the Current Configuration

MADDRESS, Using I/O Configurator Commands

OCLOSE, Printing the Configuration Information

commands - IO configurator

ADEV, Adding a Peripheral to Any System

APATH, Adding a Peripheral to Any System

EXIT, Adding a Peripheral to Any System

HOLD, Adding a Peripheral to Any System

LCLASS, Adding a Peripheral to Any System

LDEV, Adding a Peripheral to Any System

LPATH, Adding a Peripheral to Any System

OCLOSE, Adding a Peripheral to Any System

commands - ISL

ODE, Running ODE

START, Entering the SYSGEN Global Module, Overview

commands - LOG configurator

CLEAR, Clearing Log Configuration Changes

EXIT, Exiting the LOG Configurator

HELP, Using the LOG Configurator Help Facility

HOLD, Holding and Saving Configuration Changes

OCLOSE, Showing Current LOG Values

SHOW, Showing Current LOG Values

SLOG, Logging System Events

ULOG, Logging User Events

commands - MISC configurator

CLEAR, Clearing MISC Configuration Changes

DRIN, Deleting Global Resource Identification Numbers (RIN)

EXIT, Exiting the MISC Configurator

help, Using the MISC Configurator Help Facility

HOLD, Holding and Saving Configuration Changes

JOB, Configuring Job-Related Limits

LRIN, Displaying Allocated Global RINs

OCLOSE, Displaying Allocated Global RINs

RESOURCE, Setting Resource Allocations

SESSION, Setting Session-Related Limits

SHOW, Showing Values of Current Configurable Items

STACK, Setting Sizes of Native Mode and Compatibility Mode Stacks

SYSTEM, Setting Strings and String Parameters

commands - MPE XL

REPLY, Adding a Peripheral to Any System

commands - MPE/iX

ABORTJOB, Running ODE

HELLO, Running ODE

JOBFENCE, Running ODE

LIMIT, Running ODE

SHOWJOB, Running ODE

TELL, Running ODE

WARN, Running ODE

commands - SYSFILE configurator

AAUTO, Displaying Current File Information

ABOOT, Displaying Current File Information, Adding Boot Files

ACMSL, Displaying Current File Information, Adding a Segment to the Compatibility Mode Segmented Library (CMSL)

ASPROG, Displaying Current File Information, Adding File Names to Dump to Tape

DAUTO, Deleting Objects from the SYSGEN Tape, Deleting Autoboot Images

DBOOT, Deleting Objects from the SYSGEN Tape, Deleting Boot Images

DCMSL, Deleting Objects from the SYSGEN Tape, Deleting Compatibility Mode Segments from a SYSGEN Tape

DSPROG, Deleting Objects from the SYSGEN Tape, Removing System Programs from a SYSGEN Tape

help, Using the SYSFILE Configurator Help Facility

RAUTO, Replacing Objects on the SYSGEN Tape

RBOOT, Replacing Objects on the SYSGEN Tape, Replacing Boot Images

RCAT, Replacing Objects on the SYSGEN Tape, Configuring a Message Catalog

RCMSL, Replacing Objects on the SYSGEN Tape, Replacing a CMSL Segment

RDCC, Replacing Objects on the SYSGEN Tape, Replacing or Defining a Network Configuration File

RIPL, Replacing Objects on the SYSGEN Tape

RNMLIB, Replacing Objects on the SYSGEN Tape

RSPROG, Replacing Objects on the SYSGEN Tape

SHOW, Displaying Current File Information

commands - SYSGEN

BASEGROUP, Specifying the Base Group, Holding and Saving Configuration Changes, Adding a Peripheral to Any System

CLEAR, Using the System Generator (SYSGEN), Clearing Configuration Changes

EXIT, Exiting SYSGEN

HOLD, Saving Configuration Changes

IO, Adding a Peripheral to Any System

KEEP, Using the System Generator (SYSGEN), Saving Configuration Changes, Holding and Saving Configuration Changes, Holding and Saving Configuration Changes, Adding a Peripheral to Any System

LOG, Entering the LOG Configurator

MISC, Entering the MISC Configurator

OCLOSE, Showing the State of Configurators, Generating a System Load Tape

PERMYES, Confirming Potentially Serious Actions

SHOW, Showing the State of Configurators

SYSFILE, Entering the SYSFILE Configurator

TAPE, Generating a System Load Tape, Adding a Peripheral to Any System

commands in SYSSTART file, Executing Commands During System Startup

commands, access port

RS, Hard Reset

TC, Soft Reset

compatibility mode segment library, Displaying Current File Information

see CMSL, Displaying Current File Information

CONFIG

UPDATE option, Using the UPDATE Utility and Options

CONFIG group, Using the System Generator (SYSGEN)

CONFIG.SYS, Using the UPDATE Utility and Options, Default Configurations Used by INSTALL and UPDATE

configuration

disk drives, Adding a Peripheral to Any System

retaining current, Backing up the System and Retaining the Current Configuration, Back up the System and Retain the Current Configuration

SCSI, Adding a Peripheral to Any System

configuration changes

clearing, Clearing Log Configuration Changes, Clearing MISC Configuration Changes

holding, Holding and Saving Configuration Changes

saving, Holding and Saving Configuration Changes

configuration data, Using the System Generator (SYSGEN)

account used to store, Using the System Generator (SYSGEN)

erasing changes, Using the System Generator (SYSGEN)

modifying, Modifying Input/Output (I/O) Configurations, I/O Paths Used to Boot a System

storing, How System Configuration Is Performed

configuration files

copying, Using SYSGEN to Copy the Files

creating, Using the System Generator (SYSGEN)

permanent, Using the System Generator (SYSGEN)

temporary, Using the System Generator (SYSGEN)

configuration group, Using the System Generator (SYSGEN)

configuring a message catalog, Configuring a Message Catalog

configuring job related limits, Configuring Job-Related Limits

configuring local devices, Modifying Input/Output (I/O) Configurations

configuring terminals, How System Configuration Is Performed

configuring the console, Using the Access Port (AP)

confirming potentially serious actions

SYSGEN utility, Confirming Potentially Serious Actions

console messages

sending, Enabling Remote Console Access

console mode

returning from control mode, Using the AP Help Facility

console path, I/O Paths Used to Boot a System

constructing I/O paths, Selecting I/O Paths

control mode

entering, Resetting the System Using the Console, Entering Control Mode and Using the Command Interpreter, Testing the AP

control mode (CM), Resetting the System Using the Console

copying default configuration file groups, Copying Default Configuration File Groups

creating configuration files, Using the System Generator (SYSGEN)

CTB, Selecting I/O Paths

see central bus, Selecting I/O Paths

CTRL B, Resetting the System Using the Console

D

DAUTO

SYSFILE configurator command, Deleting Objects from the SYSGEN Tape, Deleting Autoboot Images

DBOOT

SYSFILE configurator command, Deleting Objects from the SYSGEN Tape, Deleting Boot Images

DCLASS

I/O Configurator command, Deleting Objects in SYSGEN

DCMSL

SYSFILE configurator command, Deleting Objects from the SYSGEN Tape, Deleting Compatibility Mode Segments from a SYSGEN Tape

DDEV

I/O Configurator command, Deleting Objects in SYSGEN

default configuration groups

A-Class, Default Configurations Used by INSTALL and UPDATE

ALINE925, Default Configurations Used by INSTALL and UPDATE, Overview

ALINK925, Default Configurations Used by INSTALL and UPDATE, Overview

ALINK932, Default Configurations Used by INSTALL and UPDATE

ALINK935, Default Configurations Used by INSTALL and UPDATE, Overview

ALINK948, Default Configurations Used by INSTALL and UPDATE

ALINK958, Default Configurations Used by INSTALL and UPDATE

ALINK990, Default Configurations Used by INSTALL and UPDATE

ALINK991, Default Configurations Used by INSTALL and UPDATE

ALINK992, Default Configurations Used by INSTALL and UPDATE

ALINK995, Default Configurations Used by INSTALL and UPDATE

CONF9X71, Default Configurations Used by INSTALL and UPDATE

CONF9X72, Default Configurations Used by INSTALL and UPDATE

CONF9X73, Default Configurations Used by INSTALL and UPDATE

CONF9X74, Default Configurations Used by INSTALL and UPDATE

CONF9X75, Default Configurations Used by INSTALL and UPDATE

CONFE925, Default Configurations Used by INSTALL and UPDATE, Overview

CONFE950, Default Configurations Used by INSTALL and UPDATE, Overview

CONFG920, Default Configurations Used by INSTALL and UPDATE

CONFG922, Default Configurations Used by INSTALL and UPDATE

CONFG925, Default Configurations Used by INSTALL and UPDATE, Overview

CONFG932, Default Configurations Used by INSTALL and UPDATE

CONFG935, Default Configurations Used by INSTALL and UPDATE, Overview

CONFG948, Default Configurations Used by INSTALL and UPDATE

CONFG950, Default Configurations Used by INSTALL and UPDATE, Overview

CONFG958, Default Configurations Used by INSTALL and UPDATE

CONFG990, Default Configurations Used by INSTALL and UPDATE

CONFG991, Default Configurations Used by INSTALL and UPDATE

CONFG992, Default Configurations Used by INSTALL and UPDATE

CONFG995, Default Configurations Used by INSTALL and UPDATE

CONFSCS0, Default Configurations Used by INSTALL and UPDATE

N-Class, Default Configurations Used by INSTALL and UPDATE

default options

INSTALL utility, Using the INSTALL Utility and Options

START utility, Using START and its Options

UPDATE utility, Using the UPDATE Utility and Options

defining a network configuration file, Replacing or Defining a Network Configuration File

defining system parameters, What Is System Configuration?

deleting autoboot images, Deleting Autoboot Images

deleting boot images, Deleting Boot Images

deleting classes in SYSGEN, Deleting Objects in SYSGEN

deleting compatibility mode segments from a SYSGEN tape, Deleting Compatibility Mode Segments from a SYSGEN Tape

deleting devices in SYSGEN, Deleting Objects in SYSGEN

deleting global resource identification numbers, Deleting Global Resource Identification Numbers (RIN)

deleting I/O paths in SYSGEN, Deleting Objects in SYSGEN

deleting objects from the SYSGEN tape, Deleting Objects from the SYSGEN Tape

detecting system independent errors, Generating a System Load Tape

determining I/O paths, Selecting I/O Paths

device adapter, Selecting I/O Paths

devices

listing, Determining and Selecting Input and Output (I/O) Paths

verifying, Verifying Attached Devices

disk boots, Initial System Loader (ISL)

displaying autoboot and autosearch settings, Displaying Current Boot Path, Autoboot, and Autosearch Settings

displaying current file information, Displaying Current File Information

displaying fastsize value, Displaying Current Boot Path, Autoboot, and Autosearch Settings

displaying local RINs, Displaying Allocated Global RINs

displaying state of configurators

SYSGEN utility, Showing the State of Configurators

DPATH

I/O Configurator command, Deleting Objects in SYSGEN

DRIN

MISC configurator command, Deleting Global Resource Identification Numbers (RIN)

DSPROG

SYSFILE configurator command, Deleting Objects from the SYSGEN Tape, Removing System Programs from a SYSGEN Tape

DUMP, Soft Reset

dump listing, Startup, Dump, and Shutdown Listings

DUMP sequence, START Sequence

DUMP utility, ISL Boot Utilities, What is the Function of the DUMP Utility?, Using the DUMP Utility and Options

default options, Using the DUMP Utility and Options

SUBSET option, Using the DUMP Utility and Options

DUMPAREA, Initial System Loader (ISL)

dumping a system, ISL Boot Utilities

DVOL

I/O Configurator command, Deleting Objects in SYSGEN

E

enabling and disabling the autoboot flag, Activating and Deactivating Autoboot and Autosearch Functions

enabling and disabling the autosearch flag, Activating and Deactivating Autoboot and Autosearch Functions

entering an MPE command from the LOG configurator, Entering an MPE Command from the LOG Configurator

entering an MPE command from the MISC configurator, Entering an MPE Command from the MISC Configurator

entering ODE, Running ODE

entering the LOG configurator, Entering the LOG Configurator

entering the MISC configurator, Entering the MISC Configurator

entering the SYSFILE configurator, Entering the SYSFILE Configurator

entering the SYSGEN global module, Entering the SYSGEN Global Module, Redirecting SYSGEN Input and Output

erasing configuration changes, Using the System Generator (SYSGEN)

error codes, Interpreting AP Error and Informational Messages

error messages, Interpreting AP Error and Informational Messages

escape characters

entering, Allowing Scrolling

EXIT

LOG configurator command, Exiting the LOG Configurator

MISC configurator command, Exiting the MISC Configurator

SYSGEN command, Exiting SYSGEN

exiting MAPPER, Exiting mapper2

exiting MODE, Exiting ODE

exiting SYSGEN, Exiting SYSGEN

exiting the LOG configurator, Exiting the LOG Configurator

exiting the MISC configurator, Exiting the MISC Configurator

F

fastsize, Using Initial System Loader (ISL) Commands, Displaying Current Boot Path, Autoboot, and Autosearch Settings

file information

displaying, Displaying Current File Information

first level commands, using, Using First-Level (Global Module) Commands

first-time installation, Installing the Operating System, Installing the Operating System: a Preview

formal file designators

$STDINX, Entering the SYSGEN Global Module

$STDLIST, Entering the SYSGEN Global Module

SYSGIN, Entering the SYSGEN Global Module

SYSGOUT, Entering the SYSGEN Global Module

full system backup, Using the System Generator (SYSGEN)

G

generating a boot tape, Generating a System Load Tape

global resource identification numbers

deleting, Deleting Global Resource Identification Numbers (RIN)

see GRINS, Deleting Global Resource Identification Numbers (RIN)

GRIN, Deleting Global Resource Identification Numbers (RIN)

see global resource identification numbers, Deleting Global Resource Identification Numbers (RIN)

group

CONFIG, Using the System Generator (SYSGEN)

GSP, Using the Guardian Service Processor (GSP)

GSP access port, Resetting the System Using the Console

GSP command mode, Using the GSP Help Facility

GSP configuration parameters, Configuring the Console terminal

GSP security, Security Options & access control (SO)

H

halting commands

SYSGEN utility, Halting SYSGEN Command Actions

halting SYSGEN command actions, Halting SYSGEN Command Actions

hard reset, Hard Reset, Resetting the System Using the Console

hardware clock, Reading and Setting the Hardware Clock

HELLO

MPE/iX command, Running ODE

HELP facility

LOG configurator, Using the LOG Configurator Help Facility

help facility

I/O configurator, Getting Help with I/O Configurator Commands

MISC configurator, Using the MISC Configurator Help Facility

SYSFILE configurator, Using the SYSFILE Configurator Help Facility

SYSGEN global module, Using the Help Facility in SYSGEN's Global Module

HOLD

LOG configurator command, Holding and Saving Configuration Changes

MISC configurator command, Holding and Saving Configuration Changes

SYSGEN command, Saving Configuration Changes

holding configuration changes, Saving Configuration Changes, Holding and Saving Configuration Changes, Holding and Saving Configuration Changes

I

I/O configuration

modifying, Modifying Input/Output (I/O) Configurations, I/O Paths Used to Boot a System

I/O configuration changes

online, Using the IOCONFIG Utility

I/O configurator, Modifying Input/Output (I/O) Configurations, I/O Paths Used to Boot a System

help facility, Getting Help with I/O Configurator Commands

I/O Configurator commands

ACLASS, Adding Objects in SYSGEN

ADEV, Adding Objects in SYSGEN

APATH, Adding Objects in SYSGEN

AVOL, Adding Objects in SYSGEN

DCLASS, Deleting Objects in SYSGEN

DDEV, Deleting Objects in SYSGEN

DPATH, Deleting Objects in SYSGEN

DVOL, Deleting Objects in SYSGEN

MADDRESS, Changing Configurations in SYSGEN

MCLASS, Changing Configurations in SYSGEN

MDEV, Changing Configurations in SYSGEN

MPATH, Changing Configurations in SYSGEN

MVOL, Changing Configurations in SYSGEN

I/O configurator commands

HELP, Getting Help with I/O Configurator Commands

LCLASS, Viewing the Current Configuration

LDEV, Viewing the Current Configuration

LPATH, Viewing the Current Configuration

LVOL, Viewing the Current Configuration

MADDRESS, Using I/O Configurator Commands

OCLOSE, Printing the Configuration Information

I/O path

alternate boot path, Determining and Selecting Input and Output (I/O) Paths

console boot path, Determining and Selecting Input and Output (I/O) Paths

definition, Determining and Selecting Input and Output (I/O) Paths

primary boot paths, Determining and Selecting Input and Output (I/O) Paths

I/O paths

determining, Selecting I/O Paths

identify test, Displaying Configured Devices

informational messages, Informational Messages

initial program load (IPL), Initiating System Activity, Testing the System

initial system loader, Initiating System Activity, Entering the SYSGEN Global Module

input/output (I/O) configurator, Modifying Input/Output (I/O) Configurations, I/O Paths Used to Boot a System

input/output (IO) configurator, Using the System Generator (SYSGEN)

input/output dependent code (IODC), Initiating System Activity, The Booting Process, System Startup Functions

INSTALL, Soft Reset

ISL utility, Overview

using to recover system, Using the INSTALL Utility to Recover a Lost System

INSTALL options, Using the INSTALL Utility and Options

INSTALL utility, ISL Boot Utilities, Installing the Operating System, Default Configurations Used by INSTALL and UPDATE

installing the operating system, Installing the Operating System

preliminary steps, Installing the Operating System: a Preview

interactively booting a system, How System Startup is Carried Out

interrupting AUTOBOOT, Interrupting an Autobooting System

IO

SYSGEN command, Adding a Peripheral to Any System

IO configurator commands

ADEV, Adding a Peripheral to Any System

APATH, Adding a Peripheral to Any System

EXIT, Adding a Peripheral to Any System

HOLD, Adding a Peripheral to Any System

LCLASS, Adding a Peripheral to Any System

LDEV, Adding a Peripheral to Any System

LPATH, Adding a Peripheral to Any System

OCLOSE, Adding a Peripheral to Any System

IOCONFIG Utility, Using the IOCONFIG Utility

IODC See input/output dependent code, Initiating System Activity

IOMAP

ISL utility, Overview

IPL

See initial program load, Initiating System Activity

ISL, Initiating System Activity, Soft Reset, Resetting the System Using the Console, Initial System Loader (ISL), Activating and Deactivating Autoboot and Autosearch Functions

ALTPATH, Using Initial System Loader (ISL) Commands, Modifying Boot Paths in Stable Storage

AUTOBOOT, Autobooting the System, Using Initial System Loader (ISL) Commands

AUTOSEARCH, Using Initial System Loader (ISL) Commands

boot utilities, Entering the DUMP Utility and Starting the System

CLKUTIL, Reading and Setting the Hardware Clock

commands, System Startup Functions

CONSPATH, Using Initial System Loader (ISL) Commands, Modifying Boot Paths in Stable Storage

defined, How System Startup is Carried Out

DISPLAY, Using Initial System Loader (ISL) Commands, Displaying Current Boot Path, Autoboot, and Autosearch Settings

DUMP, ISL Boot Utilities, What is the Function of the DUMP Utility?, Entering the DUMP Utility and Starting the System

flag status, Activating and Deactivating Autoboot and Autosearch Functions

HELP, Using Initial System Loader (ISL) Commands

INSTALL, ISL Boot Utilities, Installing the Operating System, Default Configurations Used by INSTALL and UPDATE

IOMAP, Determining and Selecting Input and Output (I/O) Paths, Displaying Current Boot Path, Autoboot, and Autosearch Settings

LISTAUTOFL, Using Initial System Loader (ISL) Commands, Listing Autoboot File Contents

LISTF, Using Initial System Loader (ISL) Commands, Listing Available ISL Utilities

LS, Using Initial System Loader (ISL) Commands

LSAUTOFL, Using Initial System Loader (ISL) Commands, Listing Autoboot File Contents

options, System Startup Functions

PRIMPATH, Using Initial System Loader (ISL) Commands, Modifying Boot Paths in Stable Storage

READNVM, Using Initial System Loader (ISL) Commands, Reading Nonvolatile Memory (NVM)

READSS, Using Initial System Loader (ISL) Commands, Reading Stable Storage

see initial system loader, Entering the SYSGEN Global Module

START, Starting the System, Default Configurations Used by INSTALL and UPDATE

UPDATE, ISL Boot Utilities, The ISL Utility

utilities, How System Startup is Carried Out, System Startup Functions

utility options, ISL Summary

ISL commands

ODE, Running ODE

START, Entering the SYSGEN Global Module, Overview

ISL HELP facility

using, Using the Help Facility for ISL Commands

ISL settings

example, Displaying Current Boot Path, Autoboot, and Autosearch Settings

series 950-980, Listing Autoboot File Contents

ISL utilities

INSTALL, Overview

IOMAP, Overview

listing, Listing Available ISL Utilities

START, Using the System Generator (SYSGEN)

UPDATE, Overview

ISL utility, Soft Reset

ISL utility names

codes for, Reading Nonvolatile Memory (NVM)

J

JOB

MISC configurator command, Configuring Job-Related Limits

JOBFENCE

MPE/iX command, Running ODE

JOBFENCE command, Limiting System Use

K

KEEP

SYSGEN command, Using the System Generator (SYSGEN), Saving Configuration Changes, Holding and Saving Configuration Changes, Holding and Saving Configuration Changes, Adding a Peripheral to Any System

keeping configuration changes, Saving Configuration Changes

keyword parameters

SYSGEN utility, SYSGEN Command Syntax

L

LCLASS

I/O configurator command, Viewing the Current Configuration

IO configurator command, Adding a Peripheral to Any System

LDEV

I/O configurator command, Viewing the Current Configuration

IO configurator command, Adding a Peripheral to Any System

LIF. See logical interchange format, Autobooting the System

LIMIT

MPE/iX command, Running ODE

LIMIT command, Limiting System Use

limits

configuring job related, Configuring Job-Related Limits

setting session related, Setting Session-Related Limits

listing autoboot and autosearch settings, Displaying Current Boot Path, Autoboot, and Autosearch Settings

listing classes, Viewing the Current Configuration

listing devices, Determining and Selecting Input and Output (I/O) Paths, Viewing the Current Configuration

listing paths, Viewing the Current Configuration

listing RINS, Displaying Allocated Global RINs

listing volumes, Viewing the Current Configuration

LISTSPF command, Shutting the Spool Queues and Handling the Remaining Reports

load listing, Startup, Dump, and Shutdown Listings

loading a system, ISL Boot Utilities

local devices

configuring, Modifying Input/Output (I/O) Configurations

LOG

SYSGEN command, Entering the LOG Configurator

LOG configurator, Modifying Logging Configurations

entering an MPE command from, Entering an MPE Command from the LOG Configurator

exiting, Exiting the LOG Configurator

HELP facility, Using the LOG Configurator Help Facility

see logging configurator, Modifying Logging Configurations

LOG configurator commands

CLEAR, Clearing Log Configuration Changes

EXIT, Exiting the LOG Configurator

HELP, Using the LOG Configurator Help Facility

HOLD, Holding and Saving Configuration Changes

OCLOSE, Showing Current LOG Values

SHOW, Showing Current LOG Values

SLOG, Logging System Events

ULOG, Logging User Events

LOG values

showing, Showing Current LOG Values

logging

system, Modifying Logging Configurations

user, Modifying Logging Configurations

logging (LOG) configurator, Using the System Generator (SYSGEN), Modifying Logging Configurations

see LOG configurator, Using the System Generator (SYSGEN), Modifying Logging Configurations

logical interchange format (LIF), Autobooting the System

logical interface format (LIF), Initial System Loader (ISL)

loopback test, Displaying Configured Devices

LPATH

I/O configurator command, Viewing the Current Configuration

IO configurator command, Adding a Peripheral to Any System

LRIN

MISC configurator command, Displaying Allocated Global RINs

LVOL

I/O configurator command, Viewing the Current Configuration

M

MADDRESS

I/O Configurator command, Changing Configurations in SYSGEN

I/O configurator command, Using I/O Configurator Commands

MAPPER

exiting, Exiting mapper2

master consoles

changing, Entering Escape Characters

MCLASS

I/O Configurator command, Changing Configurations in SYSGEN

MDEV

I/O Configurator command, Changing Configurations in SYSGEN

message catalog

configuring, Configuring a Message Catalog

mid bus, Using the SYSGEN I/O Configurator

MISC

SYSGEN command, Entering the MISC Configurator

MISC configurator, Modifying Miscellaneous Configuration Elements

entering an MPE command from, Entering an MPE Command from the MISC Configurator

exiting, Exiting the MISC Configurator

help facility, Using the MISC Configurator Help Facility

see miscellaneous configurator, Modifying Miscellaneous Configuration Elements

MISC configurator command

CLEAR, Clearing MISC Configuration Changes

EXIT, Exiting the MISC Configurator

HOLD, Holding and Saving Configuration Changes

JOB, Configuring Job-Related Limits

LRIN, Displaying Allocated Global RINs

OCLOSE, Displaying Allocated Global RINs

RESOURCE, Setting Resource Allocations

SESSION, Setting Session-Related Limits

STACK, Setting Sizes of Native Mode and Compatibility Mode Stacks

SYSTEM, Setting Strings and String Parameters

MISC configurator commands

DRIN, Deleting Global Resource Identification Numbers (RIN)

help, Using the MISC Configurator Help Facility

SHOW, Showing Values of Current Configurable Items

miscellaneous (MISC) configurator, Using the System Generator (SYSGEN), Modifying Miscellaneous Configuration Elements

see MISC configurator, Using the System Generator (SYSGEN), Modifying Miscellaneous Configuration Elements

MMSAVE, System Startup Functions, Initial System Loader (ISL)

modifying addresses in SYSGEN, Changing Configurations in SYSGEN

modifying classes in SYSGEN, Changing Configurations in SYSGEN

modifying devices in SYSGEN, Changing Configurations in SYSGEN

modifying I/O configurations, Modifying Input/Output (I/O) Configurations

modifying paths in SYSGEN, Changing Configurations in SYSGEN

modifying system parameters, What Is System Configuration?

MPATH

I/O Configurator command, Changing Configurations in SYSGEN

MPE XL commands

REPLY, Adding a Peripheral to Any System

MPE XL utilities

SYSGEN, Using SYSGEN to Copy the Files

MPE/iX commands

ABORTJOB, Running ODE

HELLO, Running ODE

JOBFENCE, Running ODE

LIMIT, Running ODE

SHOWJOB, Running ODE

TELL, Running ODE

WARN, Running ODE

MVOL

I/O Configurator command, Changing Configurations in SYSGEN

N

N-Class

default configuration, Default Configurations Used by INSTALL and UPDATE

NETCONTROL command, Closing Any Open Communication Lines

network configuration file

defining, Replacing or Defining a Network Configuration File

replacing, Replacing or Defining a Network Configuration File

NOCONFIG

UPDATE option, Using the UPDATE Utility and Options

nonvolatile memory (NVM), Reading Nonvolatile Memory (NVM), Reading Stable Storage Contents

NOSTART

INSTALL option, Using the INSTALL Utility and Options

UPDATE option, Using the UPDATE Utility and Options

NSCONTROL command, Closing Any Open Communication Lines

NVM. See nonvolatile memory, Reading Nonvolatile Memory (NVM)

O

OCLOSE

I/O configurator command, Printing the Configuration Information

IO configurator command, Adding a Peripheral to Any System

LOG configurator command, Showing Current LOG Values

MISC configurator command, Displaying Allocated Global RINs

SYSGEN command, Showing the State of Configurators, Generating a System Load Tape

ODE

exiting, Exiting ODE

ISL command, Running ODE

ODE utility

activating, Running ODE

Online device configuration, Using the IOCONFIG Utility

P

path information

stable storage, Modifying Boot Paths in Stable Storage

PDC, Displaying Configured Devices

PDC See processor dependent code, Initiating System Activity

peripheral devices

defined, What Is System Configuration?

permanent configuration files, Using the System Generator (SYSGEN)

PERMYES

SYSGEN command, Confirming Potentially Serious Actions

PERMYES in batch mode, Redirecting SYSGEN Input and Output

PERMYES in command files, Redirecting SYSGEN Input and Output

positional parameters

SYSGEN utility, SYSGEN Command Syntax

primary boot paths, I/O Paths Used to Boot a System

processor dependent code (PDC), Initiating System Activity, The Booting Process, System Startup Functions, Initial System Loader (ISL)

R

RAUTO

SYSFILE configurator command, Replacing Objects on the SYSGEN Tape

RBOOT

SYSFILE configurator command, Replacing Objects on the SYSGEN Tape, Replacing Boot Images

RCAT

SYSFILE configurator command, Replacing Objects on the SYSGEN Tape, Configuring a Message Catalog

RCMSL

SYSFILE configurator command, Replacing Objects on the SYSGEN Tape, Replacing a CMSL Segment

RDCC

SYSFILE configurator command, Replacing Objects on the SYSGEN Tape, Replacing or Defining a Network Configuration File

re-installation, Installing the Operating System

recovery, system failure, The ISL Utility, Updating to Recover from System Failure: a Preview, Installing the Operating System

redirecting SYSGEN input and output, Redirecting SYSGEN Input and Output

reload (INSTALL), Installing the Operating System

remote console

disabling access, Sending Messages to Both Consoles

enabling access, Configuring the Access Port

remote line

disconnecting, Disabling Remote Console Access

remote support modem

connecting to a session port, Disconnecting the Remote Line

removing configuration changes, Clearing Configuration Changes

removing system programs from a SYSGEN tape, Removing System Programs from a SYSGEN Tape

repeated parameters

SYSGEN utility, SYSGEN Command Syntax

replacing a CMSL segment, Replacing a CMSL Segment

replacing a network configuration file, Replacing or Defining a Network Configuration File

replacing autoboot images, Replacing Autoboot Images

replacing boot images, Replacing Boot Images

replacing objects on the SYSGEN tape, Replacing Objects on the SYSGEN Tape

replacing operating system, The ISL Utility

REPLY

MPE XL command, Adding a Peripheral to Any System

reset, Resetting the System Using the Console

resetting the system, Resetting the System, Resetting the System Using the Console

hard reset, Resetting the System

soft reset, Resetting the System

RESOURCE

MISC configurator command, Setting Resource Allocations

resource allocations

setting, Setting Resource Allocations

resource identification numbers

deleting, Deleting Global Resource Identification Numbers (RIN)

see RIN, Deleting Global Resource Identification Numbers (RIN)

resources

allocating, Setting Resource Allocations

retaining current configuration, Backing up the System and Retaining the Current Configuration, Back up the System and Retain the Current Configuration

RIN, Deleting Global Resource Identification Numbers (RIN)

listing, Displaying Allocated Global RINs

see resource identification numbers, Deleting Global Resource Identification Numbers (RIN)

RIPL

SYSFILE configurator command, Replacing Objects on the SYSGEN Tape

RNMLIB

SYSFILE configurator command, Replacing Objects on the SYSGEN Tape

RS, Resetting the System Using the Console

access port command, Hard Reset

hard reset, Hard Reset

RSPROG

SYSFILE configurator command, Replacing Objects on the SYSGEN Tape

S

saving configuration changes, Saving Configuration Changes, Holding and Saving Configuration Changes, Holding and Saving Configuration Changes

scheduling an INSTALL, Scheduling an INSTALL

scheduling an UPDATE, Scheduling a System Update

scripting PERMYES, Redirecting SYSGEN Input and Output

scrolling

allowing, Halting Scrolling

halting, Entering Control Mode

self-test, Hard Reset, Displaying Configured Devices

Series 920

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 922

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 922LX

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 922RX

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 925

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 925LX

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 932

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 935

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 948

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 949

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 950

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 958

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 960

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 980

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 990

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 991

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 992

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 995

default configuration, Default Configurations Used by INSTALL and UPDATE

Series 9X7

default configuration, Default Configurations Used by INSTALL and UPDATE

SESSION

MISC configurator command, Setting Session-Related Limits

sessions

setting related limits, Setting Session-Related Limits

setting resource allocations, Setting Resource Allocations

setting session related limits, Setting Session-Related Limits

setting sizes of native mode and compatibility mode stacks, Setting Sizes of Native Mode and Compatibility Mode Stacks

setting strings and string parameters, Setting Strings and String Parameters

SHOW

LOG configurator command, Showing Current LOG Values

MISC configurator command, Showing Values of Current Configurable Items

SYSFILE configurator command, Displaying Current File Information

SYSGEN command, Showing the State of Configurators

SHOWDEV command, Shutting the Spool Queues and Handling the Remaining Reports

showing current file information, Displaying Current File Information

showing current LOG values, Showing Current LOG Values

showing the state of configurators, Showing the State of Configurators

showing values of current configurable items, Showing Values of Current Configurable Items

SHOWJOB

MPE/iX command, Running ODE

shutdown

abbreviated list of steps, How System Shutdown is Carried Out

definition, What Is System Shutdown?

SHUTDOWN command, How System Shutdown is Carried Out, Shutting Down the System

shutdown listing, Startup, Dump, and Shutdown Listings

shutdown sequence, DUMP Sequence

SHUTQ command, Shutting the Spool Queues and Handling the Remaining Reports

shutting down the system, How System Shutdown is Carried Out

SLOG

LOG configurator command, Logging System Events

SLT, Generating a System Load Tape, Overview

see system load tape, Overview

soft reset, Soft Reset, Resetting the System Using the Console, Hard Resetting the SPU

soft reset. See also TC, Soft Reset

software clock, Reading and Setting the Hardware Clock

specifying the base group, Specifying the Base Group

spool queues

shutting, Shutting the Spool Queues and Handling the Remaining Reports

SPU hex status display

disabling, Enabling the SPU Hex Status Display

enabling, Connecting the Remote Support Modem to a Session Port

stable storage, Modifying Boot Paths in Stable Storage

contents, Reading Stable Storage Contents

reading, Reading Stable Storage, Reading Stable Storage and Nonvolatile Memory

STACK

MISC configurator command, Setting Sizes of Native Mode and Compatibility Mode Stacks

stacks

setting sizes of compatibility mode, Setting Sizes of Native Mode and Compatibility Mode Stacks

setting sizes of native mode, Setting Sizes of Native Mode and Compatibility Mode Stacks

START

INSTALL option, Using the INSTALL Utility and Options

ISL command, Entering the SYSGEN Global Module, Overview

ISL utility, Using the System Generator (SYSGEN)

UPDATE option, Using the UPDATE Utility and Options

START listing, Startup, Dump, and Shutdown Listings

START options, Using START and its Options

START sequence, Startup, Dump, and Shutdown Listings

START utility, Starting the System

starting a system, ISL Boot Utilities

startup

abbreviated list of steps, How System Startup is Carried Out

autoboot vs. interactive, How System Startup is Carried Out

definition, What Is System Startup?

overview, Initiating System Activity

startup listing, Startup, Dump, and Shutdown Listings

status line display, Interpreting the System Status Line

strings

setting, Setting Strings and String Parameters

strings parameters

setting, Setting Strings and String Parameters

subparameters

SYSGEN utility, SYSGEN Command Syntax

support, Using Initial System Loader (ISL) Commands

SYS account, Using the System Generator (SYSGEN)

SYSFILE

SYSGEN command, Entering the SYSFILE Configurator

SYSFILE configurator, Generating a System Load Tape, Modifying System File Configurations

entering, Entering the SYSFILE Configurator

help facility, Using the SYSFILE Configurator Help Facility

see system file configurator, Modifying System File Configurations

SYSFILE configurator commands

AAUTO, Displaying Current File Information

ABOOT, Displaying Current File Information, Adding Boot Files

ACMSL, Displaying Current File Information, Adding a Segment to the Compatibility Mode Segmented Library (CMSL)

ASPROG, Displaying Current File Information, Adding File Names to Dump to Tape

DAUTO, Deleting Objects from the SYSGEN Tape, Deleting Autoboot Images

DBOOT, Deleting Objects from the SYSGEN Tape, Deleting Boot Images

DCMSL, Deleting Objects from the SYSGEN Tape, Deleting Compatibility Mode Segments from a SYSGEN Tape

DSPROG, Deleting Objects from the SYSGEN Tape, Removing System Programs from a SYSGEN Tape

he,p, Using the SYSFILE Configurator Help Facility

RAUTO, Replacing Objects on the SYSGEN Tape

RBOOT, Replacing Objects on the SYSGEN Tape, Replacing Boot Images

RCAT, Replacing Objects on the SYSGEN Tape, Configuring a Message Catalog

RCMSL, Replacing Objects on the SYSGEN Tape, Replacing a CMSL Segment

RDCC, Replacing Objects on the SYSGEN Tape, Replacing or Defining a Network Configuration File

RIPL, Replacing Objects on the SYSGEN Tape

RNMLIB, Replacing Objects on the SYSGEN Tape

RSPROG, Replacing Objects on the SYSGEN Tape

SHOW, Displaying Current File Information

SYSGEN, Backing up the System and Retaining the Current Configuration, Back up the System and Retain the Current Configuration, Default Configurations Used by INSTALL and UPDATE

I/O map, Displaying Current Boot Path, Autoboot, and Autosearch Settings

SYSGEN commands

BASEGROUP, Specifying the Base Group, Holding and Saving Configuration Changes, Adding a Peripheral to Any System

CLEAR, Using the System Generator (SYSGEN), Clearing Configuration Changes

EXIT, Exiting SYSGEN

halting, Halting SYSGEN Command Actions

HOLD, Saving Configuration Changes

IO, Adding a Peripheral to Any System

KEEP, Using the System Generator (SYSGEN), Saving Configuration Changes, Holding and Saving Configuration Changes, Holding and Saving Configuration Changes, Adding a Peripheral to Any System

LOG, Entering the LOG Configurator

MISC, Entering the MISC Configurator

OCLOSE, Showing the State of Configurators, Generating a System Load Tape

PERMYES, Confirming Potentially Serious Actions

SHOW, Showing the State of Configurators

SYSFILE, Entering the SYSFILE Configurator

TAPE, Generating a System Load Tape, Adding a Peripheral to Any System

SYSGEN global module

help facility, Using the Help Facility in SYSGEN's Global Module

SYSGEN tape

deleting compatibility mode segments from, Deleting Compatibility Mode Segments from a SYSGEN Tape

deleting objects from, Deleting Objects from the SYSGEN Tape

placing objects on, Replacing Objects on the SYSGEN Tape

removing system programs from, Removing System Programs from a SYSGEN Tape

SYSGEN Utility

command syntax, SYSGEN Command Syntax

SYSGEN utility, How System Configuration Is Performed, Using SYSGEN to Copy the Files

activating, Entering the SYSGEN Global Module, Redirecting SYSGEN Input and Output

activating the configurators, Activating the Configurators

clearing configuration changes, Clearing Configuration Changes

confirming serious actions, Confirming Potentially Serious Actions

displaying state of configurators, Showing the State of Configurators

entering the LOG configurator, Entering the LOG Configurator

exiting, Exiting SYSGEN

generating a boot tape, Generating a System Load Tape

global module, Using the System Generator (SYSGEN)

halting commands, Halting SYSGEN Command Actions

holding configuration changes, Saving Configuration Changes

keyword parameters, SYSGEN Command Syntax

positional parameters, SYSGEN Command Syntax

redirecting input and output, Redirecting SYSGEN Input and Output

repeated parameters, SYSGEN Command Syntax

saving configuration changes, Saving Configuration Changes

subparameters, SYSGEN Command Syntax

SYSFILE configurator, Generating a System Load Tape

using first level commands, Using First-Level (Global Module) Commands

SYSGIN

formal file designator, Entering the SYSGEN Global Module

SYSGOUT

formal file designator, Entering the SYSGEN Global Module

SYSMAP, Displaying Current Boot Path, Autoboot, and Autosearch Settings

SYSSTART file, Executing Commands During System Startup

example, Executing Commands During System Startup

SYSSTART file modules, Executing Commands During System Startup

SYSTEM

MISC configurator command, Setting Strings and String Parameters

system configuration

adding a disk drive, Adding a Peripheral to Any System

defined, What Is System Configuration?

disk drives, Adding a Peripheral to Any System

series 950 through 980, N-Class and A-Class Systems, Adding a Peripheral to Any System

system dependent errors, Generating a System Load Tape

system failure

recovery from, The ISL Utility, Updating to Recover from System Failure: a Preview, Installing the Operating System

system file (SYSFILE) configurator, Using the System Generator (SYSGEN), Modifying System File Configurations

see SYSFILE configurator, Using the System Generator (SYSGEN), Modifying System File Configurations

system generator (SYSGEN) utility

see SYSGEN utility, How System Configuration Is Performed

system independent errors, Generating a System Load Tape

system initialization, I/O Paths Used to Boot a System

system load, ISL Boot Utilities

system load tape, Overview

see SLT, Overview

system load tape (SLT), Default Configurations Used by INSTALL and UPDATE

system logging, Modifying Logging Configurations, Logging System Events

system parameters

defining, What Is System Configuration?

modifying, What Is System Configuration?

system reload (INSTALL), Installing the Operating System

system shutdown

overview, Halting System Activity

system shutdown. See shutdown, How System Shutdown is Carried Out

system startup. See startup, How System Startup is Carried Out

system status line

interpreting, Entering Control Mode and Using the Command Interpreter

system testing, Displaying Configured Devices

identify, Displaying Configured Devices

loopback, Displaying Configured Devices

self-test, Displaying Configured Devices

T

TAPE

SYSGEN command, Generating a System Load Tape, Adding a Peripheral to Any System

tape boots, Initial System Loader (ISL)

TC, Soft Reset, Resetting the System Using the Console

access port command, Soft Reset

See also transfer of control, Soft Reset

soft reset, Soft Reset

TELL command, Telling Users about the Shutdown, Running ODE

temporary configuration files, Using the System Generator (SYSGEN)

terminals

configuring, How System Configuration Is Performed

testing the access port, Transferring Control (Soft Reset)

TLB, Displaying Configured Devices

see translation look aside buffer (TLB), Displaying Configured Devices

transfer of control, Soft Reset, Resetting the System Using the Console, Hard Resetting the SPU

transfer of control. See also soft reset, Soft Reset

translation look aside buffer (TLB), Displaying Configured Devices

U

ULOG

LOG configurator command, Logging User Events

UPDATE, Soft Reset

ISL utility, Overview

UPDATE options, Using the UPDATE Utility and Options

UPDATE utility, ISL Boot Utilities, The ISL Utility

updating the operating system, The ISL Utility

preliminary steps, Updating the Operating System: a Preview

required steps, Updating the Operating System: a Preview

user logging, Modifying Logging Configurations, Logging User Events

using first level (global module) commands, Using First-Level (Global Module) Commands

using I/O configurator commands, Using I/O Configurator Commands

using SYSGEN to copy configuration files, Using SYSGEN to Copy the Files

using the help facility in SYSGEN's global module, Using the Help Facility in SYSGEN's Global Module

using the system generator (SYSGEN), Using the System Generator (SYSGEN)

utilities

SYSGEN, How System Configuration Is Performed

SYSGEN, activating, Entering the SYSGEN Global Module, Redirecting SYSGEN Input and Output

SYSGEN, global module, Using the System Generator (SYSGEN)

utilities - ISL

INSTALL, Overview

IOMAP, Overview

START, Using the System Generator (SYSGEN)

UPDATE, Overview

utilities - MPE XL

SYSGEN, Using SYSGEN to Copy the Files

V

verifying attached devices, Verifying Attached Devices

W

WARN

MPE/iX command, Running ODE

WARN command, Warning Users Two Minutes Before Shutting Down the System

WELCOME command, Including Shutdown Information in the Welcome Message