Index

A

ABORTJOB command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX

account

recommended passwords;password

recommended accounts and users, 6.4 Setting Passwords, Lockwords, and UDCs

accounting structure

create, 5.7 Creating the CSLT Using AUTOINST, 5.16 Rerunning HPINSTAL, 5.17 Rerunning HP Patch/iX

rebuild, 4.5 Backing Up Your System for Reinstall

activate

staging area, HP Stage/iX Concepts, 5.10 Setting a Staging Area

UDC, 6.4 Setting Passwords, Lockwords, and UDCs

add-on

checklist, Selecting Checklists

Add-on with CD-ROM checklist;checklist

Add-on with CD-ROM, Checklist F. Add-on with CD-ROM, Checklist H. Update with CD-ROM

Add-on with Tape and Manage Patches checklist;checklist

Add-on with Tape and Manage Patches, Checklist E. Add-on with Tape and Manage Patches, Checklist F. Add-on with CD-ROM

Add-on with Tape checklist;checklist

Add-on with Tape, Checklist D. Add-on with Tape

Adding (SUBSYS) Products

Main menu, Preparing Your System With HP Patch/iX

option, Overview

Adding a PowerPatch option, Overview

Adding a Reactive Patch option, Overview

ALLBASE/4GL

secure the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

ALLBASE/SQL

secure the system, 5.11 Securing the System

alternate boot path, 5.2 Applying the SLT, 5.13 Applying the CSLT Modification

ALTGROUP command, 4.3 Preparing to Run HPINSTAL, 5.7 Creating the CSLT Using AUTOINST

apply CSLT, 5.13 Applying the CSLT Modification

AUTOBOOT, 5.4 Starting the System, 5.5 Configuring the System, 5.13 Applying the CSLT Modification, 6.7 Performing the Final Reboot

AUTOINST, 5.7 Creating the CSLT Using AUTOINST

apply PowerPatch files, 5.15 Rerunning AUTOINST

file set, 5.11 Securing the System

options, 5.7 Creating the CSLT Using AUTOINST

RECOVERY parameter, 5.15 Rerunning AUTOINST

tool definition, Tool Options

AutoRestart/iX

secure the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

available patches;patch

available, Overview

AVRSCSI

MOUNT command, 4.3 Preparing to Run HPINSTAL

AXLDEV1, 4.1 Reserving Disk Space for Tape Tasks

AXLSPACE, 4.1 Reserving Disk Space for Tape Tasks, 4.12 Reserving Disk Space for CD-ROM Tasks

B

backup

re-install, 4.5 Backing Up Your System for Reinstall

secure the system, 5.1 Securing and Backing Up the System for Tape Tasks

system, 6.9 Backing Up Your System

system;system

backup;full system backup, 5.11 Securing the System

base

group HPINSTAL, 4.6 Creating the CSLT using HPINSTAL

location, HP Stage/iX Concepts

boot the system

alternate boot path, 5.13 Applying the CSLT Modification

alternate path, 5.2 Applying the SLT

primary boot path, 6.7 Performing the Final Reboot

primary path, 5.2 Applying the SLT, 5.5 Configuring the System, 5.14 Restarting the System

BUILD command, 4.1 Reserving Disk Space for Tape Tasks, 4.12 Reserving Disk Space for CD-ROM Tasks

BULDACCT, 4.5 Backing Up Your System for Reinstall, 6.2 Restoring User Files

BULDJOB1 file, 6.2 Restoring User Files

BULDJOB1 file;BULDJOB2 file, 4.5 Backing Up Your System for Reinstall

BULDJOB2 file, 6.2 Restoring User Files

C

capabilities

system manager for staging area, 5.10 Setting a Staging Area

capacity

LDEV 1, LDEV 1 Disk Minimum Capacity

CD-ROM

drive, CD-ROM Disk Drive

loading disk, 4.3 Preparing to Run HPINSTAL

product list, 4.6 Creating the CSLT using HPINSTAL

SCSI, 4.3 Preparing to Run HPINSTAL

secure the system, 5.11 Securing the System

certificate

keyword, 4.6 Creating the CSLT using HPINSTAL

checklist

using, Task Checklists

CHECKSLT

RESTORE command, Contiguous Disk Space Requirements

CLKUTIL command, 5.2 Applying the SLT

command

ABORTJOB, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX

ALTGROUP, 4.3 Preparing to Run HPINSTAL, 5.7 Creating the CSLT Using AUTOINST

AVRSCSI, 4.3 Preparing to Run HPINSTAL

CLKUTIL, 5.2 Applying the SLT

COMMIT, 6.10 Permanently Applying a Staging Area

DSTAT, 4.3 Preparing to Run HPINSTAL, 5.6 Checking Volumes

HPINSTAL, 4.6 Creating the CSLT using HPINSTAL

INSTALL, 5.2 Applying the SLT, 5.13 Applying the CSLT Modification

LIMIT, 5.1 Securing and Backing Up the System for Tape Tasks, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area, 5.14 Restarting the System

MAPPER, 5.3 Listing the System Configuration

MKNOD, 6.6 Setting Up the TAR Utility

MOUNT, 4.3 Preparing to Run HPINSTAL

NETCONTROL, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX, 6.8 Restarting Selected System Functions

NEWGROUP, 4.3 Preparing to Run HPINSTAL

NEWVOL, 5.6 Checking Volumes, 5.14 Restarting the System

NMMGR, Converting Datacomm

NSCONTROL, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX

ODE, 5.3 Listing the System Configuration

OPENQ, 5.14 Restarting the System, 5.17 Rerunning HP Patch/iX

PURGE, 4.1 Reserving Disk Space for Tape Tasks, 4.12 Reserving Disk Space for CD-ROM Tasks

PURGEGROUP, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 6.8 Restarting Selected System Functions

RDCC, Converting Datacomm

RENAME, 6.4 Setting Passwords, Lockwords, and UDCs

REPORT, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

RESTORE, Installing HP Patch/iX

RESTORE PowerPatch, 4.3 Preparing to Run HPINSTAL

SCRATCHVOL, 5.6 Checking Volumes, 5.14 Restarting the System

SET STAGE, 5.10 Setting a Staging Area

SETCATALOG, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

SETINIT, 4.3 Preparing to Run HPINSTAL

SETUP, 4.3 Preparing to Run HPINSTAL

SHOWDBE, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

SHOWJOB, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX

SHOWLOGSTATUS, 5.11 Securing the System

SHUTDOWN, 5.2 Applying the SLT, 5.5 Configuring the System, 5.12 Shutting Down the Remote System, 5.13 Applying the CSLT Modification

SLTCOPY, 4.6 Creating the CSLT using HPINSTAL

SPOOLER, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area

STAGEMAN, 4.4 Initializing HP Stage/iX, 5.10 Setting a Staging Area, 6.3 Recovering Staging Areas, 6.10 Permanently Applying a Staging Area

START, 5.4 Starting the System, 5.5 Configuring the System, 6.7 Performing the Final Reboot

STARTDBE, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

STORE, 5.11 Securing the System

backup, 4.5 Backing Up Your System for Reinstall, 5.11 Securing the System

STREAM, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area, 5.14 Restarting the System, 5.17 Rerunning HP Patch/iX

SYSFILE, 6.4 Setting Passwords, Lockwords, and UDCs

SYSGEN, 5.5 Configuring the System, 5.11 Securing the System, Converting Datacomm, 6.4 Setting Passwords, Lockwords, and UDCs, 6.9 Backing Up Your System

UPDATE, 5.13 Applying the CSLT Modification

VSOPEN/VSCLOSE, 4.3 Preparing to Run HPINSTAL

COMMIT command, HP Stage/iX Concepts, 6.10 Permanently Applying a Staging Area

configuration

default I/O, 5.3 Listing the System Configuration

files, 5.5 Configuring the System, 6.1 Configuring Datacomm and UPS

hardware, 5.3 Listing the System Configuration

information, 3.2 General Planning Tasks

save changes, 5.5 Configuring the System

system, 5.5 Configuring the System

system group, 5.4 Starting the System

configuration file

conversion, Converting Datacomm

cross validate, Converting Datacomm

restore, 5.5 Configuring the System

configure

data communication, 6.1 Configuring Datacomm and UPS

devices, 5.5 Configuring the System

network interfaces, 6.8 Restarting Selected System Functions

system volume, 5.14 Restarting the System

console

factory SLT, 5.2 Applying the SLT

logon, 4.2 Reserving Disk Space for Distributing Staging Areas, 4.5 Backing Up Your System for Reinstall, 5.6 Checking Volumes, 5.7 Creating the CSLT Using AUTOINST, 5.11 Securing the System

contiguous disk space, 3.6 Estimating Disk Space, Contiguous Disk Space Requirements, 4.1 Reserving Disk Space for Tape Tasks

conversion

disk space to megabytes, Converting Between Disk Sectors and MBytes

NMMGRVER, Converting Datacomm

create

accounting structure, 5.7 Creating the CSLT Using AUTOINST

CSLT with AUTOINST, 5.7 Creating the CSLT Using AUTOINST

Stage Tape menu option, Selecting Patching Task

CSLT

add customized files, 4.6 Creating the CSLT using HPINSTAL

apply, 5.13 Applying the CSLT Modification

base group file, 4.6 Creating the CSLT using HPINSTAL

mount, 5.13 Applying the CSLT Modification

PowerPatch for remote system, 4.6 Creating the CSLT using HPINSTAL

re-install checklist;Re-Install Using a CSLT checklist; checklist

Re-Install Using a CSLT checklist, Checklist J. Reinstall Using a CSLT

update, 5.13 Applying the CSLT Modification

CSLT creating

for patches, Qualifying Patches Steps, Overview

for remote system, 4.6 Creating the CSLT using HPINSTAL

with AUTOINST, 5.7 Creating the CSLT Using AUTOINST

with HPINSTAL, 4.6 Creating the CSLT using HPINSTAL

with Patch/iX, Overview

cstm user interface, Two Interfaces

menus and commands, cstm Menus and Commands

system map, System Map in cstm

customize

file added to CSLT, 4.6 Creating the CSLT using HPINSTAL

patch preparation, Preparing Your System With HP Patch/iX

D

DADCONF file, Converting Datacomm

data communication

configure, 6.1 Configuring Datacomm and UPS

configuring, 6.1 Configuring Datacomm and UPS

convert files, Converting Datacomm

start, 6.8 Restarting Selected System Functions

date

confirming start up, 5.2 Applying the SLT

start up, 5.4 Starting the System, 5.13 Applying the CSLT Modification, 5.14 Restarting the System

system, 6.7 Performing the Final Reboot

DBEnvironment

secure the system, 5.11 Securing the System

DDS tape

restoring with HPINSTAL, 5.16 Rerunning HPINSTAL

secure the system, 5.11 Securing the System

deactivate UDC, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

Detail Summary screen, Viewing Patches (optional)

device class, 4.6 Creating the CSLT using HPINSTAL, 5.7 Creating the CSLT Using AUTOINST

device icons, System Map and Device Icons

diagnose tool (STM), Kinds of Support Tools

diagnostic tool

MAPPER, 5.3 Listing the System Configuration

directory structure

rebuild, 6.2 Restoring User Files

disable

UDC, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

disk

drive requirements, LDEV 1 Disk Minimum Capacity

limitations, LDEV 1 Disk Minimum Capacity

system domain, 5.6 Checking Volumes

disk space

contiguous, Contiguous Disk Space Requirements

conversion, Converting Between Disk Sectors and MBytes

default, Disk Space Error Messages

error message, Disk Space Error Messages

estimating, 3.6 Estimating Disk Space

net, Non-Contiguous Disk Space Requirements

non-contiguous, 3.6 Estimating Disk Space, Disk Space Estimate for Updating

reserving, 4.1 Reserving Disk Space for Tape Tasks, 4.2 Reserving Disk Space for Distributing Staging Areas

Distributing Staging Areas to Remote Systems checklist;checklist

Distributing Staging Areas to Remote Systems, Checklist C. Distributing Staging Areas to Remote Systems

downtime planning, 3.2 General Planning Tasks

drive

CD-ROM, CD-ROM Disk Drive

drive status

DSTAT command, 4.3 Preparing to Run HPINSTAL

LONER, 4.3 Preparing to Run HPINSTAL

MASTER-RO, 4.3 Preparing to Run HPINSTAL

DSTAT command, LDEV 1 Disk Minimum Capacity, 4.3 Preparing to Run HPINSTAL, 5.6 Checking Volumes, 5.14 Restarting the System

DTC, 6.1 Configuring Datacomm and UPS, Converting Datacomm

adding link, Converting Datacomm

power cycle, 6.8 Restarting Selected System Functions

E

electronic download, System Software Media Requirements

error messages

disk space, Disk Space Error Messages

exercise tool (STM), Kinds of Support Tools

expert tool (STM), Kinds of Support Tools

F

Factory System Load Tape (SLT), Source Material Components, 5.2 Applying the SLT, 5.3 Listing the System Configuration

failure log, Getting Result Information (Logs)

FASTSIZE value, 5.2 Applying the SLT, 5.13 Applying the CSLT Modification

files

converting data comm configuration files, 6.1 Configuring Datacomm and UPS

firmware update tool (STM), Kinds of Support Tools

force

patches, Overview

Force function key, Qualifying Patches Steps

FOS, Source Material Components

AUTOINST option, 5.7 Creating the CSLT Using AUTOINST

restore files, 5.7 Creating the CSLT Using AUTOINST

function key

Next Filter, Viewing Patches (optional)

Process, Preparing Your System With HP Patch/iX

H

hardware

device configuration, 5.5 Configuring the System

peripherals, 5.3 Listing the System Configuration

HICAT000 file, 4.3 Preparing to Run HPINSTAL

HP files customized;customize

HP files, 3.2 General Planning Tasks

HP Patch/iX

complete messages, 5.17 Rerunning HP Patch/iX

tool definition, Tool Options

HP-IB device adapter, Removal of Support for Servers and HP-IB in MPE/iX

HPINSTAL

base group, 4.6 Creating the CSLT using HPINSTAL

command, 4.6 Creating the CSLT using HPINSTAL

complete messages, 5.16 Rerunning HPINSTAL

file, 4.3 Preparing to Run HPINSTAL

options, 4.6 Creating the CSLT using HPINSTAL

RECOVERY parameter, 5.16 Rerunning HPINSTAL

rerunning, 5.16 Rerunning HPINSTAL

tool definition, Tool Options

HPINSTFL

file, 5.11 Securing the System

purging, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

I

I/O

configuration, 5.3 Listing the System Configuration

inconsistencies

resolving, Converting Datacomm

INDIRLST

file, 4.3 Preparing to Run HPINSTAL

information tool (STM), Kinds of Support Tools

initialization messages, 5.2 Applying the SLT, 5.4 Starting the System, 5.13 Applying the CSLT Modification, 6.7 Performing the Final Reboot

initialize

Stage/iX, Overview

install

checklist, Selecting Checklists

checklist;checklist

Install a New System;Install a New System checklist ;new system checklist, Checklist K. Install a New System

factory SLT, 5.2 Applying the SLT

Patch/iX, Installing HP Patch/iX

resume with AUTOINST, 5.15 Rerunning AUTOINST

resume with HPINSTAL, 5.16 Rerunning HPINSTAL

INSTALL command, 5.2 Applying the SLT, 5.13 Applying the CSLT Modification

INSTALL.SYS group, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

installation files

processing, 5.16 Rerunning HPINSTAL, 5.17 Rerunning HP Patch/iX

zero, 5.7 Creating the CSLT Using AUTOINST, 5.15 Rerunning AUTOINST

installation jobs

complete, 5.15 Rerunning AUTOINST

stream, 5.7 Creating the CSLT Using AUTOINST

INSTUTIL

group, 4.3 Preparing to Run HPINSTAL

IODFAULT, 5.5 Configuring the System

IPL, 5.2 Applying the SLT, 5.5 Configuring the System, 5.13 Applying the CSLT Modification, 5.14 Restarting the System

ISL, 6.7 Performing the Final Reboot

prompt, 5.2 Applying the SLT

ISQL, 5.1 Securing and Backing Up the System for Tape Tasks

secure the system, 5.11 Securing the System

J

JCONFJOB, Converting Datacomm

job abort for log off, 5.1 Securing and Backing Up the System for Tape Tasks

K

KEYFILE, 4.3 Preparing to Run HPINSTAL, 4.6 Creating the CSLT using HPINSTAL

keyword

certificate, 4.6 Creating the CSLT using HPINSTAL

master product, 4.6 Creating the CSLT using HPINSTAL

references, 4.3 Preparing to Run HPINSTAL

L

LAN console card, Converting Datacomm

LDEV

hard disk requirements, LDEV 1 Disk Minimum Capacity

PowerPatch tape, Preparing Your System With HP Patch/iX, Creating Patch or Stage Tape Steps

Reactive tape, Preparing Your System With HP Patch/iX

SUBSYS tape, Preparing Your System With HP Patch/iX, Creating Patch or Stage Tape Steps

LDEV 1

capacity, LDEV 1 Disk Minimum Capacity

disk space, 4.1 Reserving Disk Space for Tape Tasks, 4.2 Reserving Disk Space for Distributing Staging Areas

limitations, LDEV 1 Disk Minimum Capacity

libraries

copying, Preparing Your System With HP Patch/iX

modify, Creating Patch or Stage Tape Steps

LIMIT command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area, 5.14 Restarting the System

limitations

LDEV1 disk, LDEV 1 Disk Minimum Capacity

local system, 4.3 Preparing to Run HPINSTAL

lockword

reapply, 6.4 Setting Passwords, Lockwords, and UDCs

set, 6.4 Setting Passwords, Lockwords, and UDCs

log off

users, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX

log on

Patch/iX, Starting HP Patch/iX

logging processes

record names, 5.11 Securing the System

secure the system, 5.11 Securing the System

terminate, 5.11 Securing the System

logid, 5.11 Securing the System

LONER status, 4.3 Preparing to Run HPINSTAL, 5.6 Checking Volumes, 5.14 Restarting the System

LP device

configure class, 5.5 Configuring the System

M

Main menu

Adding (SUBSYS) Products, Preparing Your System With HP Patch/iX

Patch/iX, Starting HP Patch/iX

Select Activities option, Overview

Stage/iX initialized, Overview

manage patch, Overview

MANAGER.SYS

disable UDC, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

password, 6.4 Setting Passwords, Lockwords, and UDCs

manually installed products, 6.5 Configuring and Updating Manually Installed Products

secure the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

MAPPER

command, 5.3 Listing the System Configuration

Mark function key, Preparing Your System With HP Patch/iX

MASTER

status, 5.6 Checking Volumes, 5.14 Restarting the System

master product

keyword, 4.6 Creating the CSLT using HPINSTAL

list, 4.6 Creating the CSLT using HPINSTAL

list subset, 4.6 Creating the CSLT using HPINSTAL

MASTER-RO status, 4.3 Preparing to Run HPINSTAL

media

options, Media Requirements

requirements, Source Material Components

source, 3.2 General Planning Tasks

MEMBER status, 5.14 Restarting the System

messages

initialization and restore, 6.7 Performing the Final Reboot

startup and initialization, 5.2 Applying the SLT, 5.4 Starting the System

MGR.HPOFFICE

secure the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

MKNOD command, 6.6 Setting Up the TAR Utility

MOUNT command, 4.3 Preparing to Run HPINSTAL

MPEXL_SYSTEM_VOLUME_SET, 5.6 Checking Volumes

mstm user interface, Two Interfaces

menus and commands, mstm Menus and Commands

shortcut keys, mstm Shortcut Keys

system map, System Map in mstm

N

net disk space, Non-Contiguous Disk Space Requirements

NETCONTROL command, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX, 6.8 Restarting Selected System Functions

NetWare, 3.2 General Planning Tasks

network

addresses, Converting Datacomm

configuration, Converting Datacomm

names for interfaces, 6.8 Restarting Selected System Functions

planning, 3.2 General Planning Tasks

router, 6.8 Restarting Selected System Functions

NEWGROUP command, 4.3 Preparing to Run HPINSTAL

NEWVOL command, 5.6 Checking Volumes, 5.14 Restarting the System

Next Filter function key, Viewing Patches (optional)

NIO system LDEV 1 usage, LDEV 1 Disk Maximum Usage

NMCONFIG

configuration changes, 5.5 Configuring the System

file, 6.1 Configuring Datacomm and UPS

file recovery, Converting Datacomm

NMMGR

utility, 6.1 Configuring Datacomm and UPS

NMMGRVER

utility, Converting Datacomm

non-contiguous disk space, 4.1 Reserving Disk Space for Tape Tasks, 4.2 Reserving Disk Space for Distributing Staging Areas

non-contiguous disk space;permanent amount of non-contiguous disk space, 3.6 Estimating Disk Space

NOSYSSTART option, 5.4 Starting the System, 5.14 Restarting the System

NS3000/iX

secure the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

stream JCONFJOB, Converting Datacomm

NSCONTROL command, 6.8 Restarting Selected System Functions

O

ODBCLink/SE installation, ODBCLink Installation

ODE

command, 5.3 Listing the System Configuration

online tools, Support Tools Manager (STM) for MPE/iX

getting result information, Getting Result Information (Logs)

logs, Getting Result Information (Logs)

tool types, Kinds of Support Tools

OP user level, 6.4 Setting Passwords, Lockwords, and UDCs

operating system

version level requirements, Operating System Version Requirements

P

password

set, 6.4 Setting Passwords, Lockwords, and UDCs

patch

create CSLT, Qualifying Patches Steps

create stage area, Qualifying Patches Steps, Overview

create STORE tape, Qualifying Patches Steps, Overview

default preparation, Preparing Your System With HP Patch/iX

dependent, Qualifying Patches Steps

force, Overview

installation tape, Overview

manage, Overview

modify approved list, Qualifying Patches Steps

preparation customized, Preparing Your System With HP Patch/iX

qualify, Overview

qualify with AUTOINST, 5.7 Creating the CSLT Using AUTOINST

selecting for installation, Overview

stage compatible, Qualifying Patches Steps

veto, Overview

view detail, Viewing Patches (optional)

Patch/iX

apply patches, 5.17 Rerunning HP Patch/iX

components, HP Patch/iX

install, Installing HP Patch/iX

introduction, HP Patch/iX

log on, Starting HP Patch/iX

Main menu, Starting HP Patch/iX

start, Starting HP Patch/iX

PATCHXL group, Preparing Your System With HP Patch/iX

peak disk space;maximum amount of non-contiguous disk space, 3.6 Estimating Disk Space

peripherals

hardware, 5.3 Listing the System Configuration

plan

general, 3.2 General Planning Tasks

task, Planning for Your Task

PM (Privilege Mode) user level, 6.4 Setting Passwords, Lockwords, and UDCs

power cycle

DTCs, 6.8 Restarting Selected System Functions

power failure protection, Converting Datacomm

PowerPatch, Source Material Components

AUTOINST option, 5.7 Creating the CSLT Using AUTOINST

information file restoring, Preparing Your System With HP Patch/iX

Patch/iX, Overview

Patch/iX tape request, Creating Patch or Stage Tape Steps

restore, 4.6 Creating the CSLT using HPINSTAL, 5.7 Creating the CSLT Using AUTOINST, 5.11 Securing the System

restore files, Creating Patch or Stage Tape Steps

restore with AUTOINST, 5.7 Creating the CSLT Using AUTOINST

PowerTrust, Converting Datacomm

pre-4.0 OS version, 3.2 General Planning Tasks

Predictive Support

secure the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 6.8 Restarting Selected System Functions

primary boot path, 5.2 Applying the SLT, 5.5 Configuring the System, 5.14 Restarting the System, 6.7 Performing the Final Reboot

print_device, 4.1 Reserving Disk Space for Tape Tasks, 4.2 Reserving Disk Space for Distributing Staging Areas, 4.3 Preparing to Run HPINSTAL, 4.5 Backing Up Your System for Reinstall, 5.6 Checking Volumes, 5.7 Creating the CSLT Using AUTOINST, 5.8 Preparing a Staging Area for Remote Distribution, 5.10 Setting a Staging Area, 5.11 Securing the System, 5.12 Shutting Down the Remote System, 5.14 Restarting the System, 5.17 Rerunning HP Patch/iX

Process function key, Preparing Your System With HP Patch/iX

process installation files, 5.16 Rerunning HPINSTAL, 5.17 Rerunning HP Patch/iX

PRODLIST, 4.3 Preparing to Run HPINSTAL

product

numbers, 4.6 Creating the CSLT using HPINSTAL

references, 4.3 Preparing to Run HPINSTAL

remote system, 4.6 Creating the CSLT using HPINSTAL

product (SUBSYS) information file

restore, Preparing Your System With HP Patch/iX

product list, 4.6 Creating the CSLT using HPINSTAL

progress messages, 5.15 Rerunning AUTOINST

PSDCFILE, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 6.8 Restarting Selected System Functions

PSIDNLD

secure the system, 5.11 Securing the System

purge

AXLSPACE, 4.1 Reserving Disk Space for Tape Tasks

HPINSTFL, 5.11 Securing the System

INSTALL.SYS files, Preparing Your System With HP Patch/iX

patch and installation files, Preparing Your System With HP Patch/iX

PATCHXL files, Preparing Your System With HP Patch/iX

USL.SYS, UXL.SYS, and UNL.SYS files, Preparing Your System With HP Patch/iX

PURGE command, 4.12 Reserving Disk Space for CD-ROM Tasks

PURGEGROUP command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 6.8 Restarting Selected System Functions

Q

qualify

patches, Overview, 5.7 Creating the CSLT Using AUTOINST

Qualify Patches

function key, Viewing Patches (optional)

option, Overview

R

RDCC command, Converting Datacomm

re-install

backup, 4.5 Backing Up Your System for Reinstall

checklist, Selecting Checklists, Checklist J. Reinstall Using a CSLT

reactive patch, Overview

checklists, Selecting Checklists

tape restore, Preparing Your System With HP Patch/iX

task definition, Source Material Components

reboot

staging area, 6.10 Permanently Applying a Staging Area

rebuild

accounting structure, 4.5 Backing Up Your System for Reinstall

directory structure, 6.2 Restoring User Files

RECOVERY parameter, 5.15 Rerunning AUTOINST, 5.16 Rerunning HPINSTAL

remote

update checklist;Modify Remote System checklist; checklist

Modify Remote System checklist, Checklist I. Modify Remote System

remote system

add files, 4.3 Preparing to Run HPINSTAL

create CSLT, 4.6 Creating the CSLT using HPINSTAL

product list, 4.6 Creating the CSLT using HPINSTAL

secure the system, 5.11 Securing the System

SLTCOPY command, 4.6 Creating the CSLT using HPINSTAL

rename

rules, 3.2 General Planning Tasks

RENAME command, 6.4 Setting Passwords, Lockwords, and UDCs

REPORT command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

required materials, 3.1 Verifying Required Materials

rerun Patch/iX, 5.17 Rerunning HP Patch/iX

reset

system, 5.5 Configuring the System, 5.12 Shutting Down the Remote System, 5.13 Applying the CSLT Modification, 6.7 Performing the Final Reboot

UDCs, 6.2 Restoring User Files

restart system, 6.7 Performing the Final Reboot

restore

configuration files, 5.5 Configuring the System

FOS, 5.7 Creating the CSLT Using AUTOINST

messages, 5.13 Applying the CSLT Modification

NMCONFIG file, Converting Datacomm

patch and product information, Preparing Your System With HP Patch/iX

Patch/iX, Installing HP Patch/iX

PowerPatch, 4.6 Creating the CSLT using HPINSTAL, 5.7 Creating the CSLT Using AUTOINST

PowerPatch files, Creating Patch or Stage Tape Steps

PowerPatch information file, Preparing Your System With HP Patch/iX

product (SUBSYS) information file, Preparing Your System With HP Patch/iX

reactive patch tape, Preparing Your System With HP Patch/iX

SUBSYS, 5.7 Creating the CSLT Using AUTOINST

user files, 6.2 Restoring User Files

RESTORE command, 4.3 Preparing to Run HPINSTAL

resume installation

AUTOINST, 5.15 Rerunning AUTOINST

HPINSTAL, 5.16 Rerunning HPINSTAL

router network interface, 6.8 Restarting Selected System Functions

RSPROG command, 3.2 General Planning Tasks

S

SCRATCHVOL command, 5.6 Checking Volumes, 5.14 Restarting the System

SCSI

CD-ROM, 4.3 Preparing to Run HPINSTAL

secure the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

security

account, 6.4 Setting Passwords, Lockwords, and UDCs

BULDJOB files, 6.2 Restoring User Files

Select Activities

option, Overview

sessions

abort, 5.1 Securing and Backing Up the System for Tape Tasks

secure the system, 5.11 Securing the System

set

lockwords, 6.4 Setting Passwords, Lockwords, and UDCs

passwords, 6.4 Setting Passwords, Lockwords, and UDCs

SET command, 5.10 Setting a Staging Area

SETCATALOG command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 6.4 Setting Passwords, Lockwords, and UDCs

SETINIT command, 4.3 Preparing to Run HPINSTAL

SETUP

command, 4.3 Preparing to Run HPINSTAL

SETVAR command, Starting HP Patch/iX

SHOWDBE command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

SHOWJOB command, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX

SHOWLOGSTATUS command, 5.11 Securing the System

shutdown

planning, 3.2 General Planning Tasks

SHUTDOWN command, 5.5 Configuring the System, 5.12 Shutting Down the Remote System

SLT, 5.3 Listing the System Configuration

SLTCOPY

command, 4.6 Creating the CSLT using HPINSTAL

special accounts

customized;accounts

HP defined;password, 3.2 General Planning Tasks

spool files

secure the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

SPOOLER command, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area

SPUINFOP file, 5.14 Restarting the System, 6.7 Performing the Final Reboot

SQLUTIL, 5.1 Securing and Backing Up the System for Tape Tasks

secure the system, 5.11 Securing the System

stage

compatible patches, Qualifying Patches Steps

patch checklist, Checklist A. Manage Patches, Checklist B. Manage Patches by Staging Area, Checklist C. Distributing Staging Areas to Remote Systems

Stage/iX

apply staging area, 6.10 Permanently Applying a Staging Area

concepts, HP Stage/iX Concepts

initialized, Overview

introduction, HP Stage/iX

Patch/iX Main menu, Starting HP Patch/iX

selecting option, Creating Patch or Stage Tape Steps

task overview, HP Stage/iX Task Overview

tool definition, Tool Options

stage_name, 5.10 Setting a Staging Area

STAGEMAN command, 4.4 Initializing HP Stage/iX, 6.10 Permanently Applying a Staging Area

staging area, HP Stage/iX Concepts

activate, 5.10 Setting a Staging Area

contents, 5.10 Setting a Staging Area

create, Overview, Overview

create for patches, Qualifying Patches Steps, Overview

name, Creating Patch or Stage Tape Steps

permanent, 6.10 Permanently Applying a Staging Area

reboot, 6.10 Permanently Applying a Staging Area

staging group

secure the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

start

data communications, 6.8 Restarting Selected System Functions

Patch/iX, Starting HP Patch/iX

system, 5.4 Starting the System

START command, 5.4 Starting the System, 5.5 Configuring the System, 5.14 Restarting the System, 6.7 Performing the Final Reboot

START PME

create, Creating Patch or Stage Tape Steps

start the system, 5.5 Configuring the System, 5.14 Restarting the System

STARTDBE command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

startup messages, 5.2 Applying the SLT, 5.4 Starting the System

STORE

create tape for patches, Overview

files for backup, 4.5 Backing Up Your System for Reinstall

NMCONFIG file, Converting Datacomm

STORE command, 4.5 Backing Up Your System for Reinstall, 5.11 Securing the System

store tape

create for patches, Qualifying Patches Steps, Overview

stream

installation jobs, 5.7 Creating the CSLT Using AUTOINST, 5.15 Rerunning AUTOINST

STREAM command, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area

streams_device, 4.1 Reserving Disk Space for Tape Tasks, 4.2 Reserving Disk Space for Distributing Staging Areas, 4.3 Preparing to Run HPINSTAL, 4.5 Backing Up Your System for Reinstall, 5.6 Checking Volumes, 5.7 Creating the CSLT Using AUTOINST, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area, 5.11 Securing the System, 5.12 Shutting Down the Remote System, 5.14 Restarting the System, 5.17 Rerunning HP Patch/iX

configure, 5.5 Configuring the System

SUBSYS, Source Material Components

add, 4.6 Creating the CSLT using HPINSTAL

AUTOINST option, 5.7 Creating the CSLT Using AUTOINST

Patch/iX, Overview

PowerPatch add, 4.6 Creating the CSLT using HPINSTAL

restore, 5.7 Creating the CSLT Using AUTOINST

SUPACCT, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

Support Line, System Software Media Requirements

Support Tools Manager (STM), Support Tools Manager (STM) for MPE/iX

blank icon, A device in the STM map is "Unknown" (MPE/iX)

common problems, Common Problems

device icons, System Map and Device Icons

device-select class command problem, The "Device — >Select Class" command did not work.

distributed structure, Distributed Structure

failed SCSI commands, SCSI Tape and Disk Tools report SCSI commands as failed in the Test Activity Logs.

failure log, Getting Result Information (Logs)

gettting result information, Getting Result Information (Logs)

logs, Getting Result Information (Logs)

menus and commands, Menus and Commands

no tools available, No tools are available for a particular device.

online help, Getting Help

remote execution, Remote Execution

running, Running STM (Summary)

slow response, Slow response to user commands.

starting, Running STM (Summary)

system map, System Map and Device Icons

test activity log, Getting Result Information (Logs)

tool types, Kinds of Support Tools

Unit Under Test (UUT) machine, Remote Execution

unknown device, A device in the STM map is "Unknown" (MPE/iX)

User Interface (UI) machine, Remote Execution

user interfaces, Two Interfaces

SYSDIAG

utility, 6.8 Restarting Selected System Functions

SYSFILE command, 6.4 Setting Passwords, Lockwords, and UDCs

SYSGEN, 5.5 Configuring the System, 5.11 Securing the System, Converting Datacomm, 6.4 Setting Passwords, Lockwords, and UDCs, 6.9 Backing Up Your System

system

backup, 6.9 Backing Up Your System

clock, 5.2 Applying the SLT

domain, 5.6 Checking Volumes

libraries, 4.6 Creating the CSLT using HPINSTAL

libraries copying, Preparing Your System With HP Patch/iX, 5.7 Creating the CSLT Using AUTOINST

lockwords, 6.4 Setting Passwords, Lockwords, and UDCs

reboot, 6.7 Performing the Final Reboot

reset, 5.5 Configuring the System, 5.12 Shutting Down the Remote System, 5.13 Applying the CSLT Modification

restart, 6.7 Performing the Final Reboot

security, 6.2 Restoring User Files

shutdown, 5.5 Configuring the System, 5.12 Shutting Down the Remote System, 5.13 Applying the CSLT Modification

start up, 5.4 Starting the System, 5.5 Configuring the System, 5.14 Restarting the System

volumes, 5.6 Checking Volumes

system file

identify, 6.4 Setting Passwords, Lockwords, and UDCs

System Manager

activate stage area, 5.10 Setting a Staging Area

system map, System Map and Device Icons

system volume

configure, 5.14 Restarting the System

T

tape media

checklist, Selecting Checklists

TAR utility, 6.6 Setting Up the TAR Utility

terminal

Patch/iX, Starting HP Patch/iX

VSCLOSE/VSOPEN command, 4.3 Preparing to Run HPINSTAL

test activity log, Getting Result Information (Logs)

third-party software

compatibility, 3.2 General Planning Tasks

time

confirming start up, 5.2 Applying the SLT

start up, 5.4 Starting the System, 5.13 Applying the CSLT Modification, 5.14 Restarting the System

system, 6.7 Performing the Final Reboot

U

UDC

activate, 6.4 Setting Passwords, Lockwords, and UDCs

deactivate, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

disable, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

filenames, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

reset, 6.2 Restoring User Files

secure the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System

Unit Under Test (UUT) machine, Remote Execution

UPDATE

command, 5.13 Applying the CSLT Modification

update

CD-ROM, 4.6 Creating the CSLT using HPINSTAL

disk space requirements, 3.6 Estimating Disk Space

factory SLT, 5.2 Applying the SLT

remote system, 4.6 Creating the CSLT using HPINSTAL

tool options, Disk Space Error Messages

Update with CD-ROM checklist;checklist

Update with CD-ROM, Checklist H. Update with CD-ROM, Checklist I. Modify Remote System

UPS

devices, Converting Datacomm

Monitor/iX;uninterruptible power supply, Converting Datacomm

user

logging, 5.11 Securing the System

set passwords, 6.4 Setting Passwords, Lockwords, and UDCs

user files

restore, 6.2 Restoring User Files

restoring, 6.2 Restoring User Files

User Interface (UI) machine, Remote Execution

utilities (STM), Kinds of Support Tools

V

v.uu.ff

record level, 4.3 Preparing to Run HPINSTAL

validate

configuration, Converting Datacomm

verify tool (STM), Kinds of Support Tools

veto

function key, Qualifying Patches Steps

patches, Overview

view

available patches, Overview

available products;product

available;available products, Overview

Installed Patches;installed patches;patch

installed, Overview

patch detail, Viewing Patches (optional)

View Patches

option, Overview

screen, Viewing Patches (optional)

VOLUTIL, 5.6 Checking Volumes

VSCLOSE command, 4.3 Preparing to Run HPINSTAL

VSOPEN command, 4.3 Preparing to Run HPINSTAL

W

web site for diagnostics information, More Information