HPlogo Communicator e3000 MPE/iX Release 7.0 (Software Release C.70.00) > Chapter 2 Task Checklists

Checklist H. Update with CD-ROM

MPE documents

Complete PDF
Table of Contents
Glossary
Index

Use this task checklist if your source material is on CD-ROM and you are using a CSLT tape to:

  • Update your system software version level

  • Update your system software version level and apply PowerPatch patches

NOTE: You cannot apply Reactive patches at the same time you are updating the system. You must apply Reactive patches after you update the system. To apply Reactive patches (after you update the system) refer to the Checklist A, "Manage Patches," or Checklist B, "Manage Patches by Staging Area."

Print a copy of this checklist for each system that you are updating. Read and perform the steps only in the following sections:

Begin Preparation Tasks. Does not require exclusive access to the system.

  • Chapter 3 "Planning for Your Task"

    • 3.1 Verifying Required Materials

    • 3.2 General Planning Tasks

    • 3.3 CD-ROM Planning Tasks

    • 3.4 Checking Tape Media

    • 3.5 Checking Peripherals

    • 3.6 Estimating Disk Space

      Record contiguous disk space:

      Record non-contiguous disk space:

  • Chapter 4 "Preparing Your System"

    • 4.3 Preparing to Run HPINSTAL

      Record CD v.uu.ff version level:

    • 4.6 Creating the CSLT using HPINSTAL

      Record manually installed products:

    • 4.12 Reserving Disk Space for CD-ROM Tasks

      Record contiguous disk space:

      Record non-contiguous disk space:

Preparation Tasks completed. Schedule downtime for exclusive access.

If you are not applying this update to a master system, and instead are only creating a CSLT on a master system to apply to a remote system, you can now proceed to the Checklist I, "Modify Remote System."

Begin Exclusive Access Tasks.

  • Chapter 5 "Modifying Your System"

    • 5.11 Securing the System

      Record terminated logging processes:

      Record temporary filename for the COMMAND.PUB.SYS file:

    • 5.13 Applying the CSLT Modification

    • 5.14 Restarting the System

    • 5.16 Rerunning HPINSTAL

  • Chapter 6 "Finishing the Process"

    • 6.1 Configuring Datacomm and UPS

    • 6.4 Setting Passwords, Lockwords, and UDCs

    • 6.5 Configuring Manually Installed Products

    • 6.6 Setting Up the TAR Utility

    • 6.7 Performing the Final Reboot

    • 6.8 Restarting Selected System Functions

    • 6.9 Backing Up Your System

    • 6.11 Finishing Up

Checklist H tasks completed.

If you are also applying the CSLT onto a remote system, perform the steps on the following checklist:

  • Checklist I, "Modify Remote System"

If you have Reactive patches to apply, proceed to one of these checklists:

  • Checklist A, "Manage Patches"

  • Checklist B, "Manage Patches by Staging Area"

Record system change:

  • System name:

  • System type:

  • Date change made:

  • Change performed by:

  • OS version from:

  • OS version to:

  • Comments:



Checklist G. Update with Tape

Checklist I. Modify Remote System