|
|
Proceed to the subsection for your device:
CD-ROM Disk Drive
SCSI Tape Devices
Then review the following subsections:
CD-ROM Disk Drive
To update or add-on to your system software using a CD-ROM,
you must have a CD-ROM drive installed and configured. Refer to
Appendix E "CD-ROM Resources" :
If you have a compatible CD-ROM disk drive, proceed to the
subsection, "LDEV 1 Disk Minimum Capacity."
LDEV 1 Disk Minimum Capacity
After MPE/iX Release 6.5, you will be unable to use CIO or
fiberlink drives anywhere on the system. It is recommended that
you disconnect all unsupported devices before updating.
PCI I/O HP e3000s LDEV 1 must be 2GB or larger.
PCI I/O HP e3000: N-Class, A-Class
To identify your LDEV 1 device, use the DSTAT ALL command to determine
the logical device numbers of configured devices.
From either the terminal or console for each system:
:DSTAT ALL
If the device configured as your LDEV 1 is supported, proceed with
"LDEV 1 Disk Maximum Usage."
LDEV 1 Disk Maximum Usage
If you are using a disk drive with over 4 GBytes
capacity as LDEV 1, any disk space over the 4 GBytes is not available
for use. It cannot and will not be used for system or user files.
See Table 3-4 "NIO Systems" for a list of
NIO systems.
Table 3-4 NIO Systems
NIO Systems |
Series 9x8LX, 9x8RX, 9x9KS, 99x |
|