All functions are callable from both DAT and Debug. All functions can be called from both Native Mode (NM) and Compatibility Mode (CM). Some functions, however, deal specifically with NM or CM attributes. Input parameters are always interpreted based on the current mode, so care must be exercised when specifying procedure names and numeric literals.

Functions are logically divided into groups and can be listed with the FUNCL[IST] command, filtered by the group name.

The following table lists all functions, sorted by group name. For each function, the name, type, and a brief description is presented.

COERCION Functions

Name	Type	Description
`ASCC`	`: STR`	Coerces an expression to `ASCII`
`BOOL`	`: BOOL`	Coerces an expression to Boolean
`CST`	`: CST`	Coerces an expression to `CST ACPTR`
`CSTX`	`: CSTX`	Coerces an expression to `CSTX ACPTR`
`EADDR`	`: EADDR`	Coerces an expression to extended address.
`GRP`	`: GRP`	Coerces an expression to `GRP LCPTR`
`LGRP`	`: LGRP`	Coerces an expression to `LGRP LCPTR`
`LPTR`	`: LPTR`	Coerces an expression to long pointer.
`LPUB`	`: LPUB`	Coerces an expression to `LPUB LCPTR`
`PUB`	`: PUB`	Coerces an expression to `PUB LCPTR`
`S16`	`: S16`	Coerces an expression to signed 16-bit `INT`
`S32`	`: S32`	Coerces an expression to signed 32-bit `INT`
`S64`	`: S64`	Coerces an expression to signed 64-bit `INT`
`SADDR`	`: SADDR`	Coerces an expression to secondary address.
`SPTR`	`: SPTR`	Coerces an expression to short pointer
`SYS`	`: SYS`	Coerces an expression to SYS `LCPTR`
`TRANS`	`: TRANS`	Coerces an expression to `TRANS LCPTR`
`USER`	`: USER`	Coerces an expression to USER `LCPTR`
`U16`	`: U16`	Coerces an expression to unsigned 16-bit `INT`
`U32`	`: U32`	Coerces an expression to unsigned 32-bit `INT`

UTILITY Functions

Name	Type	Description
`ASC`	`: STR`	Converts an expression to an ASCII string
`BIN`	`: INT`	Converts an ASCII string to binary value
`BITD`	`: ANY`	Bit deposit
`BITX`	`: ANY`	Bit extract
`BOUND`	`: STR`	Tests for current definition of an operand
`CISETVAR`	`: BOOL`	Sets a new value for a CI variable
`CIVAR`	`: ANY`	Returns the current value of a CI variable
`ERRMSG`	`: STR`	Returns an error message string
`MACBODY`	`: STR`	Returns the macro body of a specified macro
`TYPEOF`	`: STR`	Returns the type of an expression
`MAPINDEX`	`: U16`	Returns the index number of a mapped file
`MAPSIZE`	`: U32`	Returns the size of a mapped file
`MAPVA`	`: LPTR`	Returns the virtual address of a mapped file

ADDRESS Functions

Name	Type	Description
`ABSTOLOG`	`: LCPTR`	CM absolute address to logical code address
`BTOW`	`: U16`	Converts a CM byte offset to a word offset
`CMNODE`	`: LCPTR`	CM address of closest CM node point
`CMTONMNODE`	`: TRANS`	NM address of closest CM node point
`CMVA`	`: LPTR`	Converts CM code address to a virtual address
`DSTVA`	`: LPTR`	Converts CM dst.off to virtual address
`HASH`	`: S32`	Hashes a virtual address
`LOGTOABS`	`: ACPTR`	CM logical code address to absolute address
`LTOLOG`	`: LCPTR`	Long pointer to logical code address
`LTOS`	`: SPTR`	Long pointer to short pointer
`NMNODE`	`: TRANS NM`	Address of closest NM node point
`NMTOCMNODE`	`: LCPTR`	CM address of closest NM node point
`OFF`	`: U32`	Extracts offset part of a virtual address
`PHYSTOLOG`	`: LCPTR`	CM physical segment/map bit to logical
`RTOV`	`: LPTR`	real to virtual
`SID`	`: U32`	Extracts the SID (space) part of a long pointer
`STOL`	`: LPTR`	Short pointer to long pointer
`STOLOG`	`: LCPTR`	Short pointer to logical code address
`VTOR`	`: U32`	Virtual to real
`VTOS`	`: SADDR`	Virtual to secondary store address

PROCESS Functions

Name	Type	Description
`CMG`	`: SPTR`	Short pointer address of CMGLOBALS record
`CMSTACKBASE`	`: LPTR`	Virtual address of the CM stack base
`CMSTACKDST`	`: U16`	Data segment number of the CM stack
`CMSTACKLIMIT`	`: LPTR`	Virtual address of the CM stack limit
`NMSTACKBASE`	`: LPTR`	Virtual address of the NM stack base
`NMSTACKLIMIT`	`: LPTR`	Virtual address of the NM stack limit
`PCB`	`: SPTR`	Address of process control block
`PCBX`	`: SPTR`	Address of process control block extension
`PIB`	`: SPTR`	Address of process information block
`PIBX`	`: SPTR`	Address process information block extension
`PSTATE`	`: STR`	Returns the process state for specified PIN
`TCB`	`: U32`	Real address of the task control block
`VAINFO`	`: ANY`	Returns virtual object information

PROCEDURE Functions

Name	Type	Description
`CMADDR`	`: LCPTR`	Logical address of a CM procedure name
`CMBPADDR`	`: LCPTR`	Logical address of a CM breakpoint index
`CMBPINDEX`	`: S16`	Index number of a CM breakpoint address
`CMBPINSTR`	`: S16CM`	Instruction at a CM breakpoint address
`CMENTRY`	`: LCPTR`	Logical entry address of a CM procedure
`CMPROC`	`: STR`	Returns the name of a CM procedure
`CMPROCLEN`	`: U16`	Returns the length of CM procedure
`CMSEG`	`: STR`	Returns the CM segment name at logical address
`CMSTART`	`: LCPTR`	Logical start address of CM procedure
`NMADDR`	`: LCPTR`	Logical address of NM procedure name
`NMBPADDR`	`: LCPTR`	Logical address of NM breakpoint index
`NMBPINDEX`	`: S16`	Index number of a NM breakpoint address
`NMBPINSTR`	`: S32NM`	Instruction at a NM breakpoint address
`NMCALL`	`: S32NM`	Dynamically invokes the specified NM routine
`NMENTRY`	`: LCPTR`	Logical entry address of NM procedure
`NMFILE`	`: STR`	Name of file containing NM logical address
`NMMOD`	`: STR`	Name of NM module at NM logical address
`NMPATH`	`: STR`	Returns the full code path of a NM procedure
`NMPROC`	`: STR`	Name of NM procedure at NM logical address

STRING Functions

Name	Type	Description
`STR`	`: STR`	Extracts a substring from a string
`STRAPP`	`: STR`	String append
`STRDEL`	`: STR`	String delete
`STRDOWN`	`: STR`	Downshifts a string
`STREXTRACT`	`: STR`	Extracts a string at a virtual address
`STRINPUT`	`: STR`	Prompts for and reads string input
`STRINS`	`: STR`	String insert
`STRLEN`	`: U16`	Returns the current length of a string
`STRLTRIM`	`: STR`	Removes leading blanks from a string
`STRMAX`	`: U16`	Returns the maximum length of a string
`STRPOS`	`: U16`	Locates a substring within a string
`STRRPT`	`: STR`	String repeat
`STRRTRIM`	`: STR`	Removes trailing blanks from a string
`STRUP`	`: STR`	Upshifts a string
`STRWRITE`	`: STR`	Builds a string from a value list

SYMBOLIC Functions

Name	Type	Description
`SYMADDR`	`: U32`	Returns the offset within a type to the specified symbolic field
`SYMCONST`	`: ANY`	Returns the value of a declared constant
`SYMINSET`	`: BOOL`	Tests for set inclusion
`SYMLEN`	`: U32`	Returns the length of the field based on a symbolic path
`SYMTYPE`	`: STR`	Returns the symbolic type based on a symbolic path
`SYMVAL`	`: ANY`	Returns the value found at a virtual address based on a symbolic path

The formal declaration of functions are presented with the following format:


   function_name : function_return_type ( function_ parameters )

The function parameters are presented as follows:


   parm_name : parm_type [=default_parm_value]

wW func abstolog

Chapter 10 System Debug Standard Functions

MPE documents