 |
» |
|
|
|
A- activating
sessions, Controlling the Number of Sessions
- activating
sessions at subsystem startup, APPC: Independent LU Session Type Data Screen, APPC: Dependent LU Session Type Data Screen
- activating
sessions programmatically, Description
- activating
the APPC subsystem, APPCCONTROL START, Activating the APPC Subsystem
- activating
the APPC subsystem programmatically, APPCStart
- activating
the SNA node (SNA link product), Description, Description, Activating the APPC Subsystem
- active
sessions
- reapportioning, Controlling the Number of Sessions
- Advanced
Program-to-Program Communication
- APPC, APPC Overview
- allocate
requests
- queued, APPC: Transaction Program Data Screen, Remotely Initiated Conversations, Node Manager Tasks, Local Programmer Tasks
- APPC
- definition
of, APPC Overview
- Network
ID Data Screen
- NMMGR, APPC: Network ID Data Screen
- Select
Session Type Screen
- NMMGR, APPC: Select Session Type Screen
- APPC Configuration
Screen
- NMMGR, APPC Configuration Screen
- APPC
Dependent LU List Data Screen
- NMMGR, APPC: Dependent LU List Data Screen
- APPC
Dependent LU Session Type Data Screen
- NMMGR, APPC: Dependent LU Session Type Data Screen
- APPC
Independent LU Session Type Data Screen
- NMMGR, APPC: Independent LU Session Type Data Screen
- APPC Mode
Type Data Screen
- NMMGR, APPC: Mode Type Data Screen
- APPC Select
Mode Type Screen
- NMMGR, APPC: Select Mode Type Screen
- APPC
Select Transaction Program Screen
- NMMGR, APPC: Select Transaction Program Screen
- APPC session
- session, The APPC Session
- APPC
STOPSESSION command, APPC Subsystem Hang
- APPC subsystem, The APPC Subsystem
- activating, APPCCONTROL START, Activating the APPC Subsystem
- activating programmatically, APPCStart
- checking status programmatically, Description
- configuration file name, Configuring the APPC Subsystem
- configuration screens, NMMGR Configuration Overview
- deactivating, APPCCONTROL STOP, Shutting Down the APPC Subsystem
- displaying status of, APPCCONTROL STATUS
- dumping internal data structures, APPCCONTROL DUMP
- error messages, APPC Subsystem Messages and Return Codes
- failure, APPC Subsystem Failure
- hang, APPC Subsystem Hang
- internal error, Parameters, Parameters
- internal tracing, Parameters, APPCCONTROL TRACEOFF, APPCCONTROL TRACEON, Parameters
- intrinsics, The APPC Subsystem
- logging, APPC Logging
- maximum session supported, Parameters
- maximum sessions supported, APPC Sessions and LUs, Parameters
- message catalog, Control Operator Intrinsics
- performance data, APPCCONTROL PERFORMANCE
- session
limit, APPC Sessions and LUs, Parameters, Parameters
- start
up problems, APPC Subsystem Problems
- startup messages, APPC Subsystem Messages and Return Codes
- troubleshooting, Troubleshooting the APPC Subsystem
- warning messages, APPC Subsystem Messages and Return Codes
- APPC
Transaction Program Data Screen
- NMMGR, APPC: Transaction Program Data Screen
- APPCCONTROL
commands
- command interpreter, Interactive Control Operator Commands
- complete list, Interactive Control Operator Commands
- help text on line, APPCCONTROL HELP
- required capabilities, Interactive Control Operator Commands
- setting UDCs, Interactive Control Operator Commands
- APPCCONTROL DUMP, APPC Subsystem Hang
- APPCCONTROL
DUMP command, APPCCONTROL DUMP
- APPCCONTROL
HELP command, APPCCONTROL HELP
- APPCCONTROL
PERFORMANCE command, APPCCONTROL PERFORMANCE
- examples, Examples
- printing the display, Description
- APPCCONTROL
PERFORMANCEON command, APPCCONTROL PERFORMANCEON
- APPCCONTROL
SESSIONS command, APPCCONTROL SESSIONS, Checking APPC Subsystem Status, Transaction Program Hang
- examples, Controlling the Number of Sessions
- APPCCONTROL
START command, APPCCONTROL START, Activating the APPC Subsystem
- startup messages, Activating the APPC Subsystem
- APPCCONTROL STATUS
command, APPCCONTROL STATUS, Checking APPC Subsystem Status
- examples, Examples, Checking APPC Subsystem Status
- line-by-line interpretation of
display, Reading the Display
- printing the display, Description
- using to diagnose problems, The APPCCONTROL STATUS Command, APPC Subsystem Problems, APPC Subsystem Hang, Transaction Program Hang
- APPCCONTROL
STOP command, APPCCONTROL STOP, Shutting Down the APPC Subsystem
- APPCCONTROL
STOPSESSION command, APPCCONTROL STOPSESSION, Terminating Sessions
- APPCCONTROL
subsystem
- Node Type 2.1 version, Interactive Control Operator Commands
- APPCCONTROL
TRACEOFF command, APPCCONTROL TRACEOFF
- APPCCONTROL TRACEON
command, APPCCONTROL TRACEON
- APPCCONTROL VERSION
command, APPCCONTROL VERSION
- example, Example
- interpretation of display, Example
- APPCDPxx.APPC.SYS
(dump file), APPCCONTROL DUMP
- APPCONTROL
PERFORMANCE command, APPCCONTROL PERFORMANCEOFF
- line-by-line interpretation
of display, Reading the Display
- APPCSessions
intrinsic, APPCSessions
- APPCStart
intrinsic, APPCStart
- APPCStatus intrinsic, APPCStatus
- APPCStop intrinsic, APPCStop
- application TPs, Transaction Programs
- APPLID
- VTAM, APPC: Dependent LU Session Type Data Screen
- AS/400
- IBM, APPC Sessions and LUs, Session Types for Different SNA Nodes, Configuration Illustrations
- AS/400 configuration, Data Required From the Remote Configuration
- automatic
activation of APPC sessions, Activating the APPC Subsystem
- automatic TP
startup, Local Programmer Tasks
- Automatically
Activated Sessions, Planning Automatic Session Activation
- automatically
activated sessions, APPC: Independent LU Session Type Data Screen, APPC: Dependent LU Session Type Data Screen
C- capabilities
required for APPCCONTROL commands, Interactive Control Operator Commands
- CATAPPC.APPC.SYS
(message catalog), Control Operator Intrinsics
- CICS
- multiple
copies running on host, Data Required From the Remote Configuration
- CICS MODENAME, APPC: Dependent LU Session Type Data Screen
- commands
- setting
UDCs, Interactive Control Operator Commands
- configuration
- APPC
subsystem screens, NMMGR Configuration Overview
- file
name, Configuring the APPC Subsystem, Link and Node Level Problems
- illustrations, Configuration Illustrations
- logging, The Node Manager's Interface to the APPC Subsystem, APPC Subsystem Configuration, Activating the APPC Subsystem
- map
of NMMGR screens, NMMGR Configuration Overview
- maximum
number of sessions, APPC: Independent LU Session Type Data Screen
- migrating, Migrating an APPC Configuration
- multiple
SNA nodes, Session Types for Different SNA Nodes, Configuration Illustrations
- parallel
sessions, APPC: Independent LU Session Type Data Screen
- problems, Link and Node Level Problems, APPC Subsystem Problems
- remote
system, Data Required From the Remote Configuration
- remotely
initiated local TP, APPC: Select Transaction Program Screen, Remotely Initiated Conversations, Node Manager Tasks
- SNA
node, APPC Subsystem Configuration
- SNA/SDLC
Link/XL, APPC Subsystem Configuration
- SNA/X.25
Link/XL, APPC Subsystem Configuration
- validating
the file, Configuration File Validation
- validation
messages, APPC Subsystem Messages and Return Codes
- CONNECTED
LEVEL 2 link state, The SNACONTROL STATUS Command
- control
operating intrinsics
- declaring, Control Operator Intrinsics
- control
operator commands
- setting UDCs, Interactive Control Operator Commands
- control operator
intrinsics, Control Operator Intrinsics
- parameter data types, Control Operator Intrinsics
- return codes, APPC Subsystem Messages and Return Codes
- conversation
- basic, LU 6.2 Verbs, The APPC Subsystem
- definition
of, APPC Overview, Conversations
- HP
3000, Node Manager Tasks
- initiating
and terminating, LU 6.2 Verbs
- locally
initiated, Establishing Conversations, Node Manager Tasks, Local Programmer Tasks
- mapped, LU 6.2 Verbs
- remotely
initiated, Establishing Conversations, Remotely Initiated Conversations, Node Manager Tasks
- conversation
requests
- queued, Remotely Initiated Conversations, Node Manager Tasks, Local Programmer Tasks
- critical summary
- NMMGR, Creating a Critical Summary
D- Data Flow Control
layer
- SNA, Structure of the HP 3000 Node
- data
lose, Lost Data
- data
stream
- generalized, LU 6.2 Verbs
- data
types for intrinsic parameters, Control Operator Intrinsics
- deactivating sessions, Description, Controlling the Number of Sessions
- deactivating
sessions programmatically, Description
- deactivating
the APPC subsystem, APPCCONTROL STOP, Shutting Down the APPC Subsystem
- deactivating
the APPC subsystem programmatically, APPCStop
- deactivating
transaction programs, Description, Description, Description
- dependent LU, APPC Sessions and LUs, Session Types for Different Remote LUs, Configuration Illustrations
- definition of, APPC: Dependent LU Session Type Data Screen
- dump
- full
system, Parameters
- dump file (APPCDPxx.APPC.SYS), APPCCONTROL DUMP
- dumping
internal data structures, APPCCONTROL DUMP
I- IBM AS/400, APPC Sessions and LUs, Session Types for Different SNA Nodes, Configuration Illustrations
- IBM system configuration, Data Required From the Remote Configuration
- idle
sessions, Terminating Sessions
- independent LU, APPC Sessions and LUs, Session Types for Different Remote LUs, Configuration Illustrations
- definition of, APPC: Independent LU Session Type Data Screen
- INIT_SELF, APPC Sessions and LUs, APPC: Dependent LU Session Type Data Screen
- INPACING
- AS/400
configuration, APPC: Mode Type Data Screen
- interactive session
control, APPC Sessions and LUs, The Node Manager's Interface to the APPC Subsystem
- intermediate
routing between nodes, APPC Sessions and LUs, Session Types for Different SNA Nodes, Configuration Illustrations
- internal
error
- full system shutdown, Parameters, Parameters
- subsystem shutdown, Parameters, Parameters
- internal tracing
- tracing, Parameters, Parameters
- intrinsics
- APPC
subsystem, The APPC Subsystem
- control
operating declaring, Control Operator Intrinsics
- control
operation return codes, APPC Subsystem Messages and Return Codes
- control
operator, Control Operator Intrinsics
- intrinsics,
control operator
- parameter data types, Control Operator Intrinsics
L- LCLCTLSSN parameter
- AS/400, APPC Subsystem Problems
- LCLLOCNAME
- AS/400
configuration, APPC: Independent LU Session Type Data Screen
- LINEID
- on
IBM host, Data Required From the Remote Configuration
- link level
startup problems, Link and Node Level Problems
- link
level trace, Link and Node Level Problems
- Local
LU Name
- configured on HP 3000, APPC: Independent LU Session Type Data Screen, APPC: Dependent LU List Data Screen
- Local
network ID
- AS/400 configuration, APPC: Network ID Data Screen, APPC: Independent LU Session Type Data Screen
- locally
initiated conversations, Establishing Conversations, Node Manager Tasks, Local Programmer Tasks
- LocalTPName
parameter
- of MCGetAllocate intrinsic, APPC: Select Transaction Program Screen
- of TPStarted intrinsic, APPC: Select Transaction Program Screen
- logging
- APPC
subsystem, The Node Manager's Interface to the APPC Subsystem
- configuration, APPC Subsystem Configuration
- logging classes, APPC Logging, Startup Problems
- logging
configuration, The Node Manager's Interface to the APPC Subsystem, Activating the APPC Subsystem, APPC Logging
- logging messages, Activating the APPC Subsystem
- destination
of, Activating the APPC Subsystem, APPC Logging
- example session activation, Activating Sessions
- example session termination, Terminating Sessions
- example shutdown, Shutting Down the APPC Subsystem
- example startup, Activating the APPC Subsystem
- Logical
Unit 6.2
- definition of, APPC Overview
- lost
data, Lost Data
- LU
- dependent, APPC Sessions and LUs, Configuration Illustrations
- independent, APPC Sessions and LUs, Configuration Illustrations
- primary, APPC Sessions and LUs, APPC: Independent LU Session Type Data Screen, Activating Sessions
- reserved, Session Types for Reserved Sessions
- secondary, APPC Sessions and LUs, APPC: Independent LU Session Type Data Screen, APPC: Dependent LU Session Type Data Screen
- LU
6.2
- definition of, APPC Overview
- luname
operand of LU macro, APPC: Dependent LU List Data Screen
M- Main
Screen
- NMMGR, Main Screen
- mapped conversation
verbs, LU 6.2 Verbs
- Maximum
Number of Sessions
- configured on HP 3000, APPC: Independent LU Session Type Data Screen, APPC: Dependent LU Session Type Data Screen
- default, APPC: Independent LU Session Type Data Screen, APPC: Dependent LU Session Type Data Screen
- Maximum
Pacing Value
- configured on HP 3000, APPC: Mode Type Data Screen
- default, APPC: Mode Type Data Screen
- Maximum
RU Size
- configured on HP 3000, APPC: Mode Type Data Screen
- default, APPC: Mode Type Data Screen
- MAXLENRU
- AS/400
configuration, APPC: Mode Type Data Screen
- MCGetAlllocate
intrinsic timer
- configuring, Local Programmer Tasks
- MCGetAllocate
intrinsic timer, APPC: Transaction Program Data Screen
- configuring, APPC: Transaction Program Data Screen
- message catalog, Control Operator Intrinsics
- migrating
a configuration, Migrating an APPC Configuration
- MODE
- AS/400
configuration, APPC: Select Mode Type Screen
- Mode
- AS/400
configuration, APPC: Independent LU Session Type Data Screen
- Mode
Name
- configured on HP 3000, APPC: Independent LU Session Type Data Screen, APPC: Dependent LU Session Type Data Screen, APPC: Select Mode Type Screen
- default, APPC: Independent LU Session Type Data Screen, APPC: Dependent LU Session Type Data Screen
- renaming, APPC: Select Mode Type Screen
- MODENAME
operand of DFHTCT TYPE=SYSTEM macro, APPC: Dependent LU Session Type Data Screen, APPC: Select Mode Type Screen
- multiple allocate
requests, Remotely Initiated Conversations, Local Programmer Tasks
- multiple
links to remote systems, The SNA Link Product, APPC: Independent LU Session Type Data Screen, Session Types for Different SNA Nodes, Configuration Illustrations
- multiple sessions, APPC Sessions and LUs, APPC: Independent LU Session Type Data Screen
N- negotiating
session limits with partner LU, Description, Description, APPC: Independent LU Session Type Data Screen, Activating Sessions
- NETDMPxx.PUB.SYS, Link and Node Level Problems
- Network
Administrator (NA) capability, Interactive Control Operator Commands
- Network
ID
- configured on HP 3000, APPC: Network ID Data Screen
- network
routing, APPC Sessions and LUs, Session Types for Different SNA Nodes, Configuration Illustrations
- NM
(Node Manager) capability, Interactive Control Operator Commands, Control Operator Intrinsics
- NMCONFIG.PUB.SYS
(configuration file), Configuring the APPC Subsystem
- NMMAINT, Link and Node Level Problems, Lost Data, APPC Subsystem Hang, System Hangs or Failures
- NMMGR, NMMGR Configuration Overview
- APPC
- Network
ID Data Screen, APPC: Network ID Data Screen
- Select
Session Type Screen, APPC: Select Session Type Screen
- APPC
Configuration Screen, APPC Configuration Screen
- APPC
Dependent LU List Data Screen, APPC: Dependent LU List Data Screen
- APPC
Dependent LU Session Type Data Screen, APPC: Dependent LU Session Type Data Screen
- APPC
Independent LU Session Type Data Screen, APPC: Independent LU Session Type Data Screen
- APPC
Mode Type Data Screen, APPC: Mode Type Data Screen
- APPC
Select Mode Type Screen, APPC: Select Mode Type Screen
- APPC
Select Transaction Program Screen, APPC: Select Transaction Program Screen
- APPC
subsystem configuration screens, NMMGR Configuration Overview
- APPC
Transaction Program Data Screen, APPC: Transaction Program Data Screen
- configuration
file validation, Configuration File Validation
- critical
summary of configuration data, Creating a Critical Summary
- HP-IBM
Screen, HP-IBM Configuration Screen
- Main
Screen, Main Screen
- map
of APPC subsystem configuration screens, NMMGR Configuration Overview
- validation
messages, APPC Subsystem Messages and Return Codes
- NMMGRF.PUB.SYS, Link and Node Level Problems
- NMMGRVER.PUB.SYS, Migrating an APPC Configuration
- NMTCxxxx.PUB.SYS
(trace file), Parameters, Parameters, Description, Parameters
- node activation, Link and Node Level Problems
- node level startup
problems, Link and Node Level Problems
- Node Manager
(NM) capability, Interactive Control Operator Commands, Control Operator Intrinsics
- node trace
- SNA
Transport, Link and Node Level Problems
- Node Type 2.0, Structure of the HP 3000 Node
- Node Type 2.1, APPC Sessions and LUs, APPC: Independent LU Session Type Data Screen
- Node Type 5, APPC Sessions and LUs
- nodes
types, Link and Node Level Problems
P- parallel sessions, APPC Sessions and LUs, APPC: Independent LU Session Type Data Screen
- disabling, APPC: Independent LU Session Type Data Screen
- enabling, APPC: Independent LU Session Type Data Screen
- parameter
data types for intrinsics, Control Operator Intrinsics
- Path Control
layer
- SNA, Structure of the HP 3000 Node
- peer-to-peer
communication, APPC Sessions and LUs, APPC: Independent LU Session Type Data Screen
- performance data, APPCCONTROL PERFORMANCE
- disabling gathering of, APPCCONTROL PERFORMANCEOFF, Parameters, Parameters
- enabling gathering of, APPCCONTROL PERFORMANCEON, Parameters, Parameters
- example display, Examples
- line-by-line interpretation of display, Reading the Display
- logged at shutdown, Shutting Down the APPC Subsystem
- printing, Description
- Presentation
Services layer
- SNA, Structure of the HP 3000 Node
- primary LU, APPC Sessions and LUs, APPC: Independent LU Session Type Data Screen, Activating Sessions
- primary SDLC link, APPC Sessions and LUs
- printing
performance data, Description
- printing
the online help file, Description
- printing the
status display, Description
- programmatic
session control, APPC Sessions and LUs, The Node Manager's Interface to the APPC Subsystem
- PROTOCOL stoptype, Parameters, Parameters
- PSI (Programmable
Serial Interface), The SNA Link Product
- PSI failure, Link and Node Level Problems
- puname operand
of PU macro, APPC: Dependent LU Session Type Data Screen
Q- Queued
Allocate Requests
- configuration, APPC: Transaction Program Data Screen
- queued
allocate requests, Remotely Initiated Conversations, Node Manager Tasks, Local Programmer Tasks
- queued
session requests, Controlling the Number of Sessions
- QUIESCE stoptype, Description, Parameters, Description, Parameters, Terminating Sessions
R- receiving data, LU 6.2 Verbs
- Remote
LU Name
- configured on the HP 3000, APPC: Dependent LU Session Type Data Screen
- Remote
LUs
- configuring multiple, Session Types for Different Remote LUs
- remotely
initiated, Node Manager Tasks
- remotely
initiated conversation, Remotely Initiated Conversations, Node Manager Tasks
- remotely
initiated conversations, Establishing Conversations, Locally Initiated Conversations
- remotely
initiated local TP
- configuring, APPC: Select Transaction Program Screen, APPC: Transaction Program Data Screen, Remotely Initiated Conversations, Node Manager Tasks
- manual or automatic startup, Local Programmer Tasks
- reserved LUs, Session Types for Reserved Sessions
- return
codes for control operator intrinsics, APPC Subsystem Messages and Return Codes
- ReturnCode
parameter
- description of, Control Operator Intrinsics
- RMTLOCNAME
- AS/400
configuration, APPC: Independent LU Session Type Data Screen
- RMTNETID
- AS/400
configuration, APPC: Network ID Data Screen
- routing between
nodes, APPC Sessions and LUs, Session Types for Different SNA Nodes, Configuration Illustrations
- run-time problems, Run-Time Problems
- RUSIZES
of MODEENT
- Logmode Table, APPC: Mode Type Data Screen
S- SDLC link
- primary
vs. secondary, APPC Sessions and LUs
- secondary LU, APPC Sessions and LUs, APPC: Independent LU Session Type Data Screen, APPC: Dependent LU Session Type Data Screen
- secondary SDLC
link, APPC Sessions and LUs
- sending data, LU 6.2 Verbs
- Service Request
- SR, Submitting an SR
- service
TPs, Transaction Programs
- session
- activating, Locally Initiated Conversations, Remotely Initiated Conversations
- activating
and deactivating, APPC Sessions and LUs, The Node Manager's Interface to the APPC Subsystem, APPCCONTROL SESSIONS, Checking APPC Subsystem Status
- activating
and deactivating programmatically, APPCSessions
- activating
at subsystem startup, APPC: Independent LU Session Type Data Screen
- activating
programmatically, Description
- allocating
conversation over, Locally Initiated Conversations
- controlling
the number of active, APPCCONTROL SESSIONS
- controlling
the number, programmatically, APPCSessions
- deactivating, Description
- deactivating
programmatically, Description
- definition
of, The APPC Session
- displaying
status of, APPCCONTROL STATUS
- how
many to configure, Planning the Number of Active Sessions
- idle, Activating Sessions, Terminating Sessions
- interactive
control, APPC Sessions and LUs, The Node Manager's Interface to the APPC Subsystem
- killing, APPCCONTROL STOPSESSION, Terminating Sessions
- maximum
number of, configuring, APPC: Dependent LU Session Type Data Screen
- multiple, APPC Sessions and LUs, APPC: Independent LU Session Type Data Screen
- number
supported, APPC Sessions and LUs
- parallel, APPC Sessions and LUs, APPC: Independent LU Session Type Data Screen
- programmatic
control, APPC Sessions and LUs, The Node Manager's Interface to the APPC Subsystem
- reapportioning
among session types, Controlling the Number of Sessions, Activating Sessions
- reserved, Session Types for Reserved Sessions
- terminated
by remote system, Terminating Sessions
- terminating, Terminating Sessions
- session
limit, APPC Sessions and LUs, Parameters, Parameters
- changing, Activating Sessions
- configuring, APPC: Independent LU Session Type Data Screen, APPC: Dependent LU Session Type Data Screen
- default for Dependent LU session type, APPC: Dependent LU Session Type Data Screen
- default for independent LU session type, APPC: Independent LU Session Type Data Screen
- for dependent LU session type, APPC: Dependent LU Session Type Data Screen
- for independent LU session type, APPC: Independent LU Session Type Data Screen
- negotiating with Partner LU, Activating Sessions
- negotiating with partner LU, Description, Description, APPC: Independent LU Session Type Data Screen
- reducing, Terminating Sessions
- setting or changing, Parameters
- setting or changing programmatically, Parameters
- warning and logging messages, Activating the APPC Subsystem
- session
type
- coding name into TP, Node Manager Tasks, Local Programmer Tasks, Node Manager Tasks, Local Programmer Tasks
- definition of, APPC: Select Session Type Screen
- how many to configure, Session Types for Different Remote LUs
- maximum number configured, Planning the Number of Session Types
- renaming, APPC: Select Session Type Screen
- Session
Type Name
- configuration, APPC: Select Session Type Screen
- sessions
- activating
at subsystem startup, APPC: Dependent LU Session Type Data Screen
- multiple, APPC Sessions and LUs
- parallel, APPC Sessions and LUs
- SETCATALOG
command
- MPE, Interactive Control Operator Commands
- shutting
down the APPC subsystem, APPCCONTROL STOP, Shutting Down the APPC Subsystem
- shutting
down the APPC subsystem programmatically, APPCStop
- SNA link activation, Description, Description
- SNA link product, Structure of the HP 3000 Node
- SNA node
- configuring
multiple, Session Types for Different SNA Nodes, Configuration Illustrations
- SNA Node
Name
- configured on HP 3000, APPC: Independent LU Session Type Data Screen, APPC: Dependent LU Session Type Data Screen
- SNA
Services
- using multiple on one SNA node, Shutting Down the APPC Subsystem
- SNA Transport activation, Activating the APPC Subsystem
- SNA/SDLC Link/XL, Structure of the HP 3000 Node
- multiple copies, The SNA Link Product, APPC Sessions and LUs, Configuration Illustrations
- product structure, The SNA Link Product
- SNA/X.25 Link/XL, Structure of the HP 3000 Node
- SNACONTRAL
STATUS command
- for Type 2.1 nodes, The SNACONTROL STATUS Command
- SNACONTROL
START command, Description, Description, Activating the APPC Subsystem
- SNACONTROL
STATUS command, The SNACONTROL STATUS Command
- for Type 2.1 nodes, Link and Node Level Problems
- SNACONTROL STOP command, Shutting Down the APPC Subsystem
- SPU
types
- node types, Link and Node Level Problems
- SR (Service Request), Submitting an SR
- SRCVPAC
of MODEENT
- Logmode Table, APPC: Mode Type Data Screen
- SSNDPAC
of MODEENT
- Logmode Table, APPC: Mode Type Data Screen
- STARTED_TASK_NAME
- on
IBM host, Data Required From the Remote Configuration
- starting
a TP
- manually or automatically, Local Programmer Tasks
- starting
SNA Transport, Activating the APPC Subsystem
- starting the
APPC subsystem, APPCCONTROL START, Activating the APPC Subsystem
- starting
the APPC subsystem programmatically, APPCStart
- startup messages, Activating the APPC Subsystem, APPC Subsystem Messages and Return Codes
- startup
problems, Startup Problems
- link and node level, Link and Node Level Problems
- Stop
Types, APPC Subsystem Hang
- stopping the
APPC subsystem, APPCCONTROL STOP, Shutting Down the APPC Subsystem
- stopping
the APPC subsystem programmatically, APPCStop
- stopping
transaction programs, Description, Description, Description
- stoptype
(KILL, PROTOCOL, or QUIESCE), Parameters, Shutting Down the APPC Subsystem
- default, Parameters
- SWITCHNMLOG
command, APPC Subsystem Hang, APPC Subsystem Failure, System Hangs or Failures
- system failure, System Hangs or Failures
- system hang, System Hangs or Failures
T- Time-out
value
- MCGetAlllocate, Local Programmer Tasks
- timer
for MCGetAllocate intrinsic
- configuring, APPC: Transaction Program Data Screen, Node Manager Tasks
- TP
- application
vs. service, Transaction Programs
- conducting
multiple conversations, Checking APPC Subsystem Status
- conducting
multiple remotely initiated conversations, APPC: Transaction Program Data Screen
- configuring
remotely initiated, Remotely Initiated Conversations
- conversations, Establishing Conversations
- definition
of, APPC Overview
- displaying
status of, APPCCONTROL STATUS
- hanging, APPC Subsystem Failure, Transaction Program Hang
- location
of executable file, Node Manager Tasks
- location
of job file
- configuration, APPC: Transaction Program Data Screen
- manual
or automatic startup, Local Programmer Tasks
- number
of instances executing at once, APPC: Transaction Program Data Screen, Checking APPC Subsystem Status
- remotely
initiated
- number of execution instances, APPC: Transaction Program Data Screen
- remotely
initiated configuring, APPC: Select Transaction Program Screen
- terminating, Description, Description, Description
- TP name, Node Manager Tasks
- coding
into TP, Local Programmer Tasks
- configuring
through NMMGR, APPC: Select Transaction Program Screen, Local Programmer Tasks
- renaming, APPC: Select Transaction Program Screen
- sent
by remote TP, APPC: Select Transaction Program Screen, Remotely Initiated Conversations, Node Manager Tasks, Remote Programmer Tasks
- trace file
- creating another, Parameters, Description, Parameters, APPC Internal Tracing
- name
of, Parameters, Parameters, Parameters, APPC Internal Tracing
- numbering, Description
- overwriting, Parameters, Parameters, Parameters
- size of, Parameters, Parameters, Parameters, APPC Internal Tracing
- tracing
- disabling
during run time, APPCCONTROL TRACEOFF
- enabling
at subsystem startup, Parameters, Parameters, APPC Internal Tracing
- enabling
during run time, APPCCONTROL TRACEON, APPC Internal Tracing
- transaction
program
- TP, APPC Overview
- Transmission
Control layer
- SNA, Structure of the HP 3000 Node
- troubleshooting
the APPC subsystem, Troubleshooting the APPC Subsystem
- Type 2.0 node, Structure of the HP 3000 Node
- Type 2.1 node, APPC Sessions and LUs, APPC: Independent LU Session Type Data Screen
- checking status of, The SNACONTROL STATUS Command, Link and Node Level Problems
- Type 5 node, APPC Sessions and LUs
V- validating
the configuration file, Configuration File Validation
- validation
- APPC
configuration, Link and Node Level Problems
- validation
messages
- APPC configuration, APPC Subsystem Messages and Return Codes
- verbs
- base
sets, LU 6.2 Verbs
- basic
conversation, LU 6.2 Verbs, The APPC Subsystem
- definition
of, APPC Overview
- mapped
conversation, LU 6.2 Verbs
- option
sets, LU 6.2 Verbs
- version
checking of software modules, APPCCONTROL VERSION
- VTAM APPLID, APPC: Dependent LU Session Type Data Screen
|
