 |
» |
|
|
|
Section 5: Miscellaneous Topics
Table of Contents
- Introduction
- intro(5) - introduction to miscellany
- A
- acctresume(5) - suspend and resume accounting when available disk space reaches threshold - see acctsuspend(5)
- acctsuspend(5) - suspend and resume accounting when available disk space reaches threshold
- acl(5) - introduction to HFS access control lists
- aclv(5) - introduction to JFS access control lists (ACLs)
- aio(5) - POSIX asynchronous I/O facility
- aio_listio_max(5) - the maximum number of POSIX asynchronous I/O operations that can be specified in a listio() call
- aio_max_ops(5) - maximum number of POSIX async I/O operations that can be queued at any time
- aio_monitor_run_sec(5) - frequency of AIO thread pool monitor execution (in seconds)
- aio_physmem_pct(5) - percentage of physical memory lockable for request call-back POSIX asynchronous I/O operations
- aio_prio_delta_max(5) - greatest delta (slowdown factor) allowed in POSIX async IO request priorities
- aio_proc_thread_pct(5) - percentage of all process threads allowed in AIO pool
- aio_proc_threads(5) - maximum number of process threads allowed in AIO pool
- aio_req_per_thread(5) - desirable ratio between number of pending AIO requests and servicing threads
- aliases(5) - aliases file for sendmail
- allocate_fs_swapmap(5) - determines when swapmap structures are allocated for filesystem swap
- alwaysdump(5) - defines which classes of kernel memory pages are dumped when a kernel panic occurs
- ARIES(5) - dynamically and transparently execute PA-RISC HP-UX applications on Integrity systems running HP-UX
- ascii(5) - map of ASCII character set
- Audio(5) - audio tools available through HP VUE
- audit(5) - introduction to HP-UX Auditing System
- B
- bufcache_max_pct(5) - TO BE OBSOLETED - see bufpages(5)
- bufpages(5) - TO BE OBSOLETED
- C
- chanq_hash_locks(5) - size of hashed pool of spinlocks protecting the channel queue hash tables
- compartments(5) - description of HP-UX compartments
- complex(5) - complex functions and macros
- core_addshmem_read(5) - determines the inclusion of readable shared memory in a process core dump
- core_addshmem_write(5) - determines the inclusion of read/write shared memory in process core dump
- core_large_utsname_on(5) - determines the addition of a new section, CORE_UTSNAME or PT_HP_CORE_UTSNAME, in a process core dump
- create_fastlinks(5) - configure the system to use fast symbolic links
- curses(5) - definitions for screen handling and optimisation functions
- D
- dbc_max_pct(5) - maximum percentage of memory to be used for caching file I/O data and metadata
- dbc_min_pct(5) - minimum percentage of memory used for caching file I/O data and metadata
- default_disk_ir(5) - enable/disable the use of a device's write cache in the SCSI subsystem
- dirent(5) - format of directory streams and directory entries
- dld.sl(5) - dynamic loader
- dld.so(5) - dynamic loader
- dma32_pool_size(5) - the amount of memory to reserve for the 32-bit DMA pool
- dnlc_hash_locks(5) - number of locks for the Directory Name Lookup Cache (DNLC)
- dontdump(5) - defines which classes of kernel memory pages are not dumped when a kernel panic occurs
- dst(5) - difference between Universal (Greenwich mean) time and Local time - see timezone(5)
- dump_compress_on(5) - selects whether the system dumps memory pages compressed or uncompressed when a kernel panic occurs.
- E
- enable_idds(5) - enable intrusion detection data source
- environ(5) - user environment
- eqmemsize(5) - determines the minimum size (in pages) of the equivalently mapped reserve pool
- executable_stack(5) - controls whether program stacks are executable by default
- expanded_node_host_names(5) - enable maximum length expansion of the system node and host names
- F
- fcntl(5) - file control options
- fenv(5) - floating-point environment macros and functions
- fs_async(5) - enables write calls to return before write operation is complete (Boolean)
- fs_symlinks(5) - maximum number of symbolic links used to resolve a path name
- fs_wrapper(5) - configuration and binary files used by file system administration commands
- G
- gssapi(5) - Generic Security Service Application Programming Interface
- gvid_no_claim_dev(5) - PCI Vendor/Device ID that the gvid graphics driver will not claim
- H
- hdlpreg_hash_locks(5) - determines the size of the pregion spinlock pool
- hfs_revra_per_disk(5) - maximum HFS file system blocks to be read in one read-ahead operation when sequentially reading backwards
- hier(5) - file system hierarchy
- hires_timeout_enable(5) - enable high resolution timers support
- hostname(5) - host name resolution description
- hosts_access(5) - format of host access control files
- hosts_options(5) - host access control language extensions
- I
- intr_strobe_ics_pct(5) - limit for the percent of time a processor is allowed to spend in interrupt context
- inttypes(5) - basic integer data types
- ioctl(5) - generic device control commands
- ioforw_timeout(5) - enable timeout in I/O forwarding
- K
- kconfig(5) - introduction to kernel configuration commands
- kerberos(5) - introduction to the Kerberos system
- krs(5) - kernel registry services
- ksi_alloc_max(5) - system-wide limit of queued signals that can be allocated
- ksi_send_max(5) - limit on number of queued signals per process
- L
- lang(5) - description of supported languages
- langinfo(5) - language information constants
- ldapux(5) - overview of LDAP-UX
- libcrash(5) - crash dump access library
- libcres.a(5) - a subset of functions from libc.a
- limits(5) - implementation-specific constants
- M
- man(5) - macros for formatting manpages
- manuals(5) - list of HP-UX documentation
- math(5) - math functions, constants, and types
- max_acct_file_size(5) - defines the maximum accounting file size
- max_async_ports(5) - maximum number of asynchronous disk ports that can be open at any time
- max_mem_window(5) - maximum number of group-private 32-bit shared memory configurable by users
- max_thread_proc(5) - defines the maximum number of concurrent threads allowed per process.
- maxdsiz(5) - maximum size (in bytes) of the data segment for any user process
- maxdsiz_64bit(5) - maximum size (in bytes) of the data segment for any user process - see maxdsiz(5)
- maxfiles(5) - initial (soft) maximum number of file descriptors per process
- maxfiles_lim(5) - hard maximum number of file descriptors per process
- maxrsessiz(5) - maximum size (in bytes) of the RSE stack for any user process on the Itanium-based platform
- maxrsessiz_64bit(5) - maximum size (in bytes) of the RSE stack for any user process on the Itanium-based platform - see maxrsessiz(5)
- maxssiz(5) - maximum size (in bytes) of the stack for any user process
- maxssiz_64bit(5) - maximum size (in bytes) of the stack for any user process - see maxssiz(5)
- maxtsiz(5) - maximum size (in bytes) of the text segment for any user process
- maxtsiz_64bit(5) - maximum size (in bytes) of the text segment for any user process - see maxtsiz(5)
- maxuprc(5) - limits the maximum number of concurrent user processes per user
- maxusers(5) - OBSOLETED
- maxvgs(5) - maximum number of LVM Volume Groups that can be created/activated on the system
- memfs_bufcache_metapct(5) - maximum percentage of buffer cache which can accommodate MemFS metadata
- memfs_bufcache_swappct(5) - percentage of buffer cache at which MemFS data buffers start swapping
- mesg(5) - enable or disable System V IPC messages at boot time
- mknod(5) - header file of macros for handling device numbers
- mknod.h(5) - header file of macros for handling device numbers - see mknod(5)
- mm(5) - the MM macro package for formatting documents
- mman(5) - memory mapping definitions
- msgmap(5) - number of entries in the System V IPC message space resource map
- msgmax(5) - maximum System V IPC message size in bytes
- msgmnb(5) - maximum number of bytes on a single System V IPC message queue
- msgmni(5) - maximum number of system-wide System V IPC message queues (IDs) allowed
- msgseg(5) - number of System V IPC message segments in the system
- msgssz(5) - number of bytes in a System V IPC message segment
- msgtql(5) - maximum number of System V IPC messages in the system at any time
- N
- nbuf(5) - TO BE OBSOLETED - see bufpages(5)
- ncdnode(5) - maximum number of open CDFS files (system-wide)
- nclist(5) - number of cblocks for pty and tty data transfers
- ncsize(5) - number of Directory Name Lookup Cache (DNLC) entries
- ndir(5) - format of HP-UX directory streams
- nfile(5) - maximum number of open files (system-wide)
- nflocks(5) - maximum number of file locks
- nfs_portmon(5) - restricts NFS services to clients from privileged ports
- ninode(5) - maximum number of HFS file system open inodes that can be in memory
- nkthread(5) - limits the number of threads allowed to run simultaneously
- nodehostnamesize(5) - size of node name and host name
- nproc(5) - limits the number of processes allowed to exist simultaneously
- npty(5) - maximum number of BSD pseudo terminals (ptys)
- NSTREVENT(5) - maximum number of outstanding STREAMS bufcalls
- nstrpty(5) - maximum number of STREAMS-based pseudo terminals (pts)
- NSTRPUSH(5) - maximum number of STREAMS modules in a single stream
- NSTRSCHED(5) - number of STREAMS scheduler daemons to run
- nstrtel(5) - specifies the number of telnet device files the kernel can support for incoming telnet sessions
- nswapdev(5) - maximum number of devices that can be enabled for swap
- nswapfs(5) - maximum number of file systems that can be enabled for swap
- nsysmap(5) - number of entries in a kernel dynamic memory allocation map
- nsysmap64(5) - number of entries in a kernel dynamic memory allocation map - see nsysmap(5)
- O
- orientation(5) - the orientation of a stream
- P
- pa_maxssiz(5) - maximum size (in bytes) of the stack for a user process running under the PA-RISC emulator on Itanium-based system
- pa_maxssiz_32bit(5) - maximum size (in bytes) of the stack for a user process running under the PA-RISC emulator on Itanium-based system - see pa_maxssiz(5)
- pa_maxssiz_64bit(5) - maximum size (in bytes) of the stack for a user process running under the PA-RISC emulator on Itanium-based system - see pa_maxssiz(5)
- pagezero_daemon_enabled(5) - zeroing of free memory in the background is enabled
- pam_authz(5) - PAM module that provides user authorization
- pam_hpsec(5) - extended authentication, account, password, and session service module for HP-UX
- pam_ldap(5) - authentication, account, session, and password management PAM modules for LDAP
- pam_unix(5) - authentication, account, session, and password management PAM modules for UNIX
- pam_updbe(5) - user policy definition service module
- partition(5) - display information about the Partition Command Line Interface
- pfdat_hash_locks(5) - determines the size of the pfdat spinlock pool
- pfs_exports(5) - directories to export to PFS clients
- pfs_fstab(5) - static file system mounting table, mounted file systems table
- pfs_xtab(5) - directories to export to PFS clients - see pfs_exports(5)
- physical_io_buffers(5) - total buffers for physical I/O operations
- portal(5) - a "window to the future" for applications
- privgrp(5) - HP-UX group privileges
- privileges(5) - description of HP-UX privileges
- privsh(5) - overview of various privileged system shells
- pthread_condvar_prio_boost(5) - control priority boost for userspace threads using pthread condition variables
- pthread_scope_options(5) - list of external options to specify the scheduling contention scope of threads
- pthread_stubs(5) - list of pthread calls for which the stubs are provided in the C library
- Q
- quota(5) - disk quotas
- R
- RBAC(5) - Role-Based Access Control - see rbac(5)
- rbac(5) - Role-Based Access Control
- rcsintro(5) - description of RCS commands
- regexp(5) - regular expression and pattern matching notation definitions
- region_hash_locks(5) - determines the size of the region spinlock pool
- remote_nfs_swap(5) - enable swapping across NFS
- rtsched_numpri(5) - number of priority values to support for POSIX.1b realtime applications
- S
- sched_thread_affinity(5) - adjust scheduler thread affinity
- scroll_lines(5) - number of scrollable lines used by the Internal Terminal Emulator
- scsi_max_qdepth(5) - maximum number of I/Os that target will queue up for execution
- scsi_maxphys(5) - maximum allowed length of an I/O on all SCSI devices
- sd(5) - Software Distributor, commands to create, distribute, install, monitor, and manage software
- secure_sid_scripts(5) - controls whether setuid and setgid bits on scripts are honored
- sema(5) - enable or disable System V IPC semaphores at boot time
- semaem(5) - adjust-on-exit maximum value
- semmni(5) - number of System V IPC system-wide semaphore identifiers
- semmns(5) - number of System V IPC system-wide semaphores
- semmnu(5) - maximum number of System V IPC undo structures for processes
- semmsl(5) - maximum number of System V IPC semaphores per identifier
- semume(5) - maximum number of System V IPC undo entries per process
- semvmx(5) - maximum value of any single System V IPC semaphore
- sendfile_max(5) - maximum number of Buffer Cache Pages used by sendfile
- shmem(5) - enable or disable System V shared memory
- shmmax(5) - maximum size (in bytes) for a System V shared memory segment
- shmmni(5) - number of System V shared memory segment identifiers in the system
- shmseg(5) - maximum number of System V shared memory segments per process
- signal(5) - description of signals
- signal.h(5) - description of signals - see signal(5)
- sis(5) - secure internet services with Kerberos authentication and authorization
- st_ats_enabled(5) - determines whether to reserve a tape device on open
- st_fail_overruns(5) - determines whether variable block mode read requests smaller than the physical record size will fail
- st_large_recs(5) - determines maximum logical record size allowed through the stape driver
- st_san_safe(5) - determines whether access to stape device special files without the no-rewind-on-close option are allowed
- stat(5) - data returned by the stat() function
- stat.h(5) - data returned by the stat() function - see stat(5)
- stdarg(5) - macros for handling variable argument lists
- stdsyms(5) - description of named defines and other specifications for namespace from HP-UX header files
- STRCTLSZ(5) - maximum size of streams message control (bytes)
- streampipes(5) - force all pipes to be STREAMS-based
- STRMSGSZ(5) - maximum size of streams message data (bytes)
- suffix(5) - file name suffix conventions
- swapmem_on(5) - allow physical memory size to exceed the available swap space
- swchunk(5) - swap chunk size in 1 KB blocks
- sysv_hash_locks(5) - System V IPC hashed spinlock pool size
- T
- tcphashsz(5) - determines the size of the networking hash tables
- term(5) - terminal capabilities
- thread_safety(5) - list of libc, libpthread and libgen interfaces which are: Not thread-safe, Cancellation Points, Cancel Safe, Async Signal Safe, and Async Cancel Safe
- timeslice(5) - scheduling interval in clock ticks per second
- timezone(5) - difference between Universal (Greenwich mean) time and Local time
- types(5) - primitive system data types
- U
- unctrl(5) - definitions for unctrl
- unistd(5) - standard structures and symbolic constants
- unlockable_mem(5) - amount of physical memory that may not be locked by user processes
- unwind(5) - overview of stack unwind library entry points and convenience macros
- unwind.h(5) - overview of stack unwind library entry points and convenience macros - see unwind(5)
- V
- values(5) - machine-dependent values
- varargs(5) - handle variable argument list
- vpmon(5) - vPars monitor management or information lookup commands
- vps_ceiling(5) - maximum (in kilobytes) of system-selectable page size
- vps_chatr_ceiling(5) - maximum (in kilobytes) of user selectable page size
- vps_pagesize(5) - minimum (in kilobytes) of system-selected page size
- vx_maxlink(5) - Configure the number of links to a file
- vx_ncsize(5) - the number of bytes to be reserved for the directory path-name cache used by the VxFS file system
- vx_ninode(5) - Determines the internal node table size
- vxfs_bc_bufhwm(5) - VxFS buffer cache high water mark(determines the VxFS buffer cache size)
- vxfs_ifree_timelag(5) - VxFS inode free time lag (specifies the minimum time to be spent on a freelist)
- vxfs_max_ra_kbytes(5) - obsolete; maximum amount of read-ahead data, in KB, that kernel may have outstanding for a single VxFS file system
- vxfs_ra_per_disk(5) - amount of VxFS file system read-ahead per disk, in KB.
- X
- xferlog(5) - FTP server logfile
|
