HP 3000 Manuals HP 3000 Manuals
Messages 4000 - 4999 (continued)
--------------------------------------------------------------------------------------
AC4258 ERROR-Cannot delete your own access group
Generated by: Administrator Utility
You tried to delete your own access group at the Delete Access
Group screen.
Have your primary DBA put you into a different access group, and
then delete the other access group.
--------------------------------------------------------------------------------------
AC4259 Cannot remove your own DBA capability
Generated by: Administrator Utility
You tried to remove the DBA capability from your own user
definition a the Change User screen.
Have your primary DBA remove your DBA capability.
--------------------------------------------------------------------------------------
AC4260 ERROR-INFO supplied without an editor specified
Generated by: Administrator Utility
There are non-blank characters in the INFO field in the Configure
View Table Editor screen, but no file information is given.
To specify a view table editor, enter complete file information.
To specify no view table editor, blank out all fields.
--------------------------------------------------------------------------------------
AC4261 ERROR-PARM supplied without an editor specified
Generated by: Administrator Utility
There are non-blank characters in the PARM field in the Configure
View Table Editor screen, but no file information is given.
To specify a view table editor, enter complete file information.
To specify no view table editor, blank out all fields.
--------------------------------------------------------------------------------------
AC4262 ERROR-INFO value must be between -32768 and 32767
Generated by: Administrator Utility
The value in the INFO field in the Configure View Table Editor
screen is invalid.
Leave the field blank, or specify an integer within the given
range.
--------------------------------------------------------------------------------------
AC4298 INTERNAL ERROR-No items in the file table
Generated by: Administrator Utility
When adding a file table definition, a file table was specified
from which to copy the item definition. The dictionary says there
are no items associated with the file table. This indicates that
the data dictionary is probably corrupt.
Use dictionary recovery procedures.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4300 ERROR-name clause too big to display. Configure a view table &
editor
Generated by: Administrator Utility
The view table definition was created using an editor. An attempt
was made to change the definition using the V/3000 screens but the
clause specified does not fit these screens.
Configure an editor and then change the view table definition
using the editor.
--------------------------------------------------------------------------------------
AC4301 ERROR-Item name can't be blank
Generated by: Administrator Utility
You did not enter a name in the Item field.
Enter an item name. On IMAGE or File table screens, either blank
out the Order field or type an item name in the Item field.
--------------------------------------------------------------------------------------
AC4303 ERROR-Can't add security to reserved table name
Generated by: Administrator Utility
Certain table definitions are predefined in Access Server during
installation; the security for these tables cannot be changed.
--------------------------------------------------------------------------------------
AC4311 ERROR-Report option value must be between 1 and number
Generated by: Administrator Utility
--------------------------------------------------------------------------------------
AC4313 ERROR-Invalid capability value for access group name
Generated by: Administrator Utility
While printing a report on access groups, the capability value in
the sorted record for the access group is a value other than 1, 2,
or 3, even though the unsorted record contained a valid value.
The data dictionary has probably been corrupted.
Restore an uncorrupted version of Access Server from a backup
tape. To ensure that saved table data and the data dictionary are
coordinated, the groups PPCSAVE.HPOFFICE and PPCDICT.HPOFFICE
should be restored from the same backup tape.
--------------------------------------------------------------------------------------
AC4314 ERROR-Report option specified is available only to DBA ADMIN
Generated by: Administrator Utility
Secondary DBAs cannot report on remote HP 3000 systems. All other
report options are available to them.
Select another option or ask your primary DBA to generate the
report on remote HP 3000 systems for you.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4315 ERROR-You must select at least one report to print
No report was selected at the Report on Configuration screen or
the Report on System Status screen.
Select at least one of the reports, or choose Done to leave the
screen.
--------------------------------------------------------------------------------------
AC4321 ERROR-There is no information to print
Generated by: Administrator Utility
A report was selected on the Report on Configuration screen or the
Report on System Status screen, but there are no entries in the
data dictionary to include in that particular report.
--------------------------------------------------------------------------------------
AC4525 ERROR-Character set selected is already the site character set
Generated by: Administrator Utility
The Administrator Utility was run with parm=8 to specify the
character set to use with Access Server on the HP 3000. The set
specified is already the one being used, and will continue to be
used.
--------------------------------------------------------------------------------------
AC4526 ERROR-Invalid character set number specified
Generated by: Administrator Utility
The Administrator Utility was run with parm=8 to specify the
character set to use with Access Server on the HP 3000. The
number specified is not in the range of 0 through 9, inclusive,
which represent the ten character sets supported. See the
Information Access Server: Database Administrator manual for more
information about supported character sets.
--------------------------------------------------------------------------------------
AC4600 ERROR-FSERR number: Failed to open view table text file name
Generated by: Administrator Utility
When adding or changing a view table definition with an editor
configured, an FOPEN failed on the work file, with the given
FSERR.
Respond to the FSERR specified.
--------------------------------------------------------------------------------------
AC4601 ERROR-FSERR number: Failed to close view table file name
Generated by: Administrator Utility
When adding or changing a view table definition with an editor
configured, an FCLOSE failed on the work file, with the given
FSERR.
Respond to the FSERR specified.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4602 ERROR-FSERR number: Unable to read from view table file name
Generated by: Administrator Utility
When adding or changing a view table definition with an editor
configured, an FREAD failed on the work file, with the given
FSERR.
Respond to the FSERR specified.
--------------------------------------------------------------------------------------
AC4603 ERROR-FSERR number: Unable to open editor name
Generated by: Administrator Utility
When adding or changing a view table definition with an editor
configured, an FOPEN failed on the editor file, with the given
FSERR.
Respond to the FSERR specified.
--------------------------------------------------------------------------------------
AC4604 ERROR-FSERR number: Unable to close editor name
Generated by: Administrator Utility
When adding or changing a view table definition with an editor
configured, an FCLOSE failed on the editor file, with the given
FSERR.
Respond to the FSERR specified.
--------------------------------------------------------------------------------------
AC4605 ERROR-CREATEPROCESS ERROR number: Unable to execute editor
Generated by: Administrator Utility
When adding or changing a view table definition with an editor
configured, Information Access Server was unable to spawn a
process for the editor to run under, with the given CREATEPROCESS
ERROR.
Respond to the CREATEPROCESS error specified.
--------------------------------------------------------------------------------------
AC4606 ERROR-FSERR number: Unable to build view table work file name
Generated by: Administrator Utility
When adding or changing a view table definition with an editor
configured, Access Server was unable to successfully FOPEN or
FCLOSE a new work file, with the given FSERR.
Respond to the FSERR specified.
--------------------------------------------------------------------------------------
AC4607 INTERNAL ERROR-Editor account name can't be blank
Generated by: Administrator Utility
When adding or changing a view table definition with an editor
configured, Access Server found that the editor definition in the
data dictionary lacked an MPE account name.
Respecify the editor with the Configure View Table Editor screen,
then try again to add or change the view table definition. If the
problem persists, consult your HP representative.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4608 INTERNAL ERROR-Editor group name can't be blank
Generated by: Administrator Utility
When adding or changing a view table definition with an editor
configured, Access Server found that the editor definition in the
data dictionary lacked an MPE group name.
Respecify the editor with the Configure View Table Editor screen,
then try again to add or change the view table definition. If the
problem persists, consult your HP representative.
--------------------------------------------------------------------------------------
AC4609 ERROR-Only 1024 characters allowed in an Item Clause
Generated by: Administrator Utility
When adding or changing a view table definition with an editor,
the maximum number of characters allowed in an Item Clause was
exceeded.
Re-edit the view table definition, or cancel adding or changing
the view table definition.
--------------------------------------------------------------------------------------
AC4610 ERROR-Only 640 characters allowed in a Using Clause
Generated by: Administrator Utility
When adding or changing a view table definition with an editor,
the maximum number of characters allowed in a Using Clause was
exceeded.
See the action for AC4609.
--------------------------------------------------------------------------------------
AC4611 ERROR-Only 640 characters allowed in a Where Clause
Generated by: Administrator Utility
When adding or changing a view table definition with an editor,
the maximum number of characters allowed in a Where Clause was
exceeded.
See the action for AC4609.
--------------------------------------------------------------------------------------
AC4612 ERROR-Only 160 characters allowed in a Sort Clause
Generated by: Administrator Utility
When adding or changing a view table definition with an editor,
the maximum number of characters allowed in a Sort Clause was
exceeded.
See the action for AC4609.
--------------------------------------------------------------------------------------
AC4613 ERROR-FSERR number: Unable to write to view table file name
Generated by: Administrator Utility
When adding or changing a view table definition with an editor
configured, an FWRITE failed on the workfile, with the given
FSERR.
Respond to the FSERR specified.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4614 ERROR-Must define an Item Clause
Generated by: Administrator Utility
When adding or changing a view table, an Item Clause must be
specified.
See the action for AC4609.
--------------------------------------------------------------------------------------
AC4615 ERROR-Must define a Using Clause
Generated by: Administrator Utility
When adding or changing a view table, a Using Clause must be
specified.
See the action for AC4609.
--------------------------------------------------------------------------------------
AC4616 ERROR-Clause identifiers must begin with *** starting in column 1
Generated by: Administrator Utility
When using an editor to add or change a view table definition,
each clause must begin with a clause identifier of three asterisks
(***) starting in column one.
See the action for AC4609.
--------------------------------------------------------------------------------------
AC4617 ERROR-Invalid clause identifier
Generated by: Administrator Utility
The clause identifier in a view table definition must have three
asterisks (***) starting in column one.
See the action for AC4609.
--------------------------------------------------------------------------------------
AC4701 ERROR-Synchronization option value must be between 1 and number
Generated by: Administrator Utility
--------------------------------------------------------------------------------------
AC4705 ERROR-Batch file name can't be blank
Generated by: Administrator Utility
On the Synchronization Main screen, a group and/or lockword was
specified, but no file name was supplied.
Either specify a file name (if you want a batch input file to be
created), or be sure the group and lockword fields are blank.
--------------------------------------------------------------------------------------
AC4706 ERROR-Invalid batch file name name
Generated by: Administrator Utility
--------------------------------------------------------------------------------------
AC4708 ERROR-Invalid group name name
Generated by: Administrator Utility
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4710 ERROR-Invalid batch file lockword
Generated by: Administrator Utility
--------------------------------------------------------------------------------------
AC4711 ERROR-No disc space to create synchronization batch file
Generated by: Administrator Utility
When using the Synchronization Main screen to specify the batch
input file, a file system error 61 or 62 occurred trying to FOPEN
the file with 1023 records.
Increase the disc space limit for the group and account, delete
files, or do the synchronization interactively.
--------------------------------------------------------------------------------------
AC4712 ERROR-Unable to create synchronization batch file, FSERR number
Generated by: Administrator Utility
Respond to the FSERR specified.
--------------------------------------------------------------------------------------
AC4713 ERROR-Account name cannot be blank
Generated by: Administrator Utility
At the Configure View Table Editor screen, the Editor and Group
fields were filled in, but the Account field was blank.
Enter the account name.
--------------------------------------------------------------------------------------
AC4714 ERROR-An MPE security violation prevents access to editor file
Generated by: Administrator Utility
At the Configure View Table Editor screen, an attempt to FOPEN the
editor file failed with an FSERR 93, indicating an MPE security
violation.
Try to run the view table editor interactively, then consult your
System Manager.
--------------------------------------------------------------------------------------
AC4715 ERROR-Group name does not exist
Generated by: Administrator Utility
You were running the Administrator Utility with parm=10 to process
a batch input file. A file equation equating the file ADMSYNC to
the actual input file specified a group that does not exist.
Correct the file equation.
--------------------------------------------------------------------------------------
AC4716 ERROR-Account name does not exist
Generated by: Administrator Utility
You were running the Administrator Utility with parm=10 to process
a batch input file. A file equation equating the file ADMSYNC to
the actual input file specified an account that does not exist.
Correct the file equation.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4720 ERROR-Batch file name doesn't exist in specified group and account
Generated by: Administrator Utility
You were running the Administrator Utility with parm=10 to process
a batch input file. A file equation equating the file ADMSYNC to
the actual input file specified a file that does not exist.
Find the actual location of the file and correct the file
equation for ADMSYNC.
--------------------------------------------------------------------------------------
AC4721 ERROR-Incorrect lockword name specified for batch file
Generated by: Administrator Utility
You were unning the Administrator Utility with parm=10 to process
a batch input file. A file equation equating the file ADMSYNC to
the actual input file specified an invalid lockword for the input
file.
Change the lockword in the file equation for ADMSYNC.
--------------------------------------------------------------------------------------
AC4722 ERROR-Unable to open synchronization batch file, FSERR number
Generated by: Administrator Utility
You were running the Administrator Utility with parm=10 to process
a batch input file. An error occurred trying to open the file.
Check the file equation for the file ADMSYNC and respond to the
FSERR specified.
--------------------------------------------------------------------------------------
AC4723 ERROR-An MPE security violation prevents access to batch file
Generated by: Administrator Utility
You were running the Administrator Utility with parm=10 to process
a batch input file. A security violation error occurred trying to
open the file.
Check the file equation for the file ADMSYNC. Make the necessary
changes so the logon being used has read access to the batch input
file.
--------------------------------------------------------------------------------------
AC4724 ERROR-Synchronization batch file is being accessed exclusively
Generated by: Administrator Utility
You were running the Administrator Utility with parm=10 to process
a batch input file. An exclusive access violation occurred trying
to open the file.
Check the file equation for the file ADMSYNC. Use :LISTF or
:LISTDIR5.PUB.SYS to confirm whether or not someone else is
currently accessing the file. Wait until the file is available
and try again.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4725 ERROR-Unrecognizable record in synchronization batch file
Generated by: Administrator Utility
You were running the Administrator Utility with parm=10 to process
a batch input file. One of the records in the file is
unrecognizable. (See the Information Access Server: Database
Administration manual for the correct record format.)
Check the format of the file to make sure it is correct. Look
for non-blank characters after the last field for each option and
valid option numbers as the first character on each line (followed
by a blank). Note that files must be kept unnumbered.
--------------------------------------------------------------------------------------
AC4729 IMSAM mismatch, item name. Dict=name, source=value
Generated by: Administrator Utility
When synchronizing an IMAGE table definition that is derived from
a database that is enhanced by IMSAM, a mismatch was found on the
IMSAM flags for the item specified.
--------------------------------------------------------------------------------------
AC4730 ERROR-Item name does not exist in the data source
Generated by: Administrator Utility
When synchronizing a table definition, an item associated with a
table defined in the Access Server data dictionary has been
deleted from the data source.
Delete the item from the table using the Change Table screens in
the Administrator Utility.
--------------------------------------------------------------------------------------
AC4731 Type mismatch, item name. Dict=name, source=value
Generated by: Administrator Utility
When synchronizing a table definition, the type of an item
associated with a table defined in the data dictionary was found
to be a different type than it is in the IMAGE dataset. (If type
conversions are automatically performed by Access Server, the
Administrator Utility will consider the converted type equivalent
to the original type in the dataset.) For example, the data
dictionary has the item as type integer but the dataset has it as
type real.
The source in the message is a value in the IMAGE dataset (for an
IMAGE table) or in the source table definition (for view tables).
Using the Change Table screens in the Administrator Utility,
press Enter and the current (correct) information will be stored
in the data dictionary.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4732 Length mismatch, item name|. Dict=name, source=name
Generated by: Administrator Utility
When synchronizing a table definition, the length of an item
associated with a table defined in the data dictionary was not the
same as it is in the IMAGE dataset.
The source in the message is a value in the IMAGE dataset (for an
IMAGE table) or in the source table definition (for view tables).
Using the Change Table screens in the Administrator Utility,
press Enter and the current (correct) definition will be stored in
the data dictionary.
--------------------------------------------------------------------------------------
AC4733 Array bound mismatch, item name. Dict=name, source=name
Generated by: Administrator Utility
When synchronizing a table definition, the array bound of an item
associated with a table defined in the data dictionary is not the
same as it is in the IMAGE dataset. (This error only occurs for
IMAGE and view tables).
The source in the message is a value in the IMAGE dataset (for an
IMAGE table) or in the source table definition (for view tables).
Using the Change Table screens in the Administrator Utility,
press Enter and the current (correct) definition will be stored in
the dictionary.
--------------------------------------------------------------------------------------
AC4736 Item kind mismatch, item name. Dict=name, source=name
Generated by: Administrator Utility
When synchronizing an IMAGE table or a view table, the table list
generated by the Administrator Utility was found to have a table
in it that is not an IMAGE table, a file, or a view table. This
is an internal error condition.
Report the error to your HP representative. The other tables
will be checked for synchronization normally.
--------------------------------------------------------------------------------------
AC4740 There are no error messages for this table
Generated by: Administrator Utility
This is an informational message indicating that no
synchronization errors were detected for this table.
--------------------------------------------------------------------------------------
AC4741 ERROR-Select at least 1 table or choose Done
Generated by: Administrator Utility
The Enter key was pressed on the Synchronization Summary screen,
but no table has been selected for which to show synchronization
errors.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4745 INTERNAL ERROR-Too many synchronization errors, workfile overflow
Generated by: Administrator Utility
When synchronizing a table, the workfile containing
synchronization error messages can take up to 32,767 messages.
This message occurs if that limit is reached.
Select a narrower synchronization option and try again.
--------------------------------------------------------------------------------------
AC4746 Table item name not found in file at offset number
Generated by: Administrator Utility
When synchronizing a file table, an item defined in the file table
had no counterpart in the file at the offset given in the table
definition.
This may be an error in item definition. Or it may be that
you've defined a new item that is a subset of an existing item or
that straddles items.
--------------------------------------------------------------------------------------
AC4747 Table item name identical to file item name
Generated by: Administrator Utility
When synchronizing a table definition, an item defined in the file
table had a counterpart in the file with the same type, offset,
and length, but the names differed.
This is probably not an error. It indicates that you have chosen
to rename the item when its table is called into Access Server.
--------------------------------------------------------------------------------------
AC4748 Item name has length length in table, length in file
Generated by: Administrator Utility
When synchronizing a file table, an item defined in the file table
had a counterpart in the file with the same name (if not a KSAM
item), type, and offset, but the lengths differed.
This may be an error in item definition. Or it may be that you
redefined the item in the table to include only the first part of
the file item.
--------------------------------------------------------------------------------------
AC4749 Table item name differs in name and length in file
Generated by: Administrator Utility
When synchronizing a file table, an item defined in the file table
had a counterpart in the file with the same type and offset, but
the names and lengths differed. The two lines that follow set out
the differences.
This may be an error in item definition. Or it may be that you
want to redefine the item in the table in this way.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4750 Item name is type type in table, type in file
Generated by: Administrator Utility
When synchronizing a file table, an item defined in the file table
had a counterpart in the file with the same name (if not a KSAM
item), offset, and length, but the types differed.
This may be an error in item definition. Or it may be that you
want to redefine the type of the item in the table.
--------------------------------------------------------------------------------------
AC4751 Table item name differs in name and type in file
Generated by: Administrator Utility
When synchronizing a file table, an item defined in the file table
had a counterpart in the file with the same length and offset, but
the names and types differed. The two lines that follow set out
the differences.
This may be an error in item definition. Or it may be that you
want to redefine the item in the table in this way.
--------------------------------------------------------------------------------------
AC4752 Table item name differs in type and length in file
Generated by: Administrator Utility
When synchronizing a file table, an item defined in the file table
had a counterpart in the file with the same name (if not a KSAM
file) and offset, but the types and lengths differed. The two
lines that follow set out the differences.
This may be an error in item definition. Or it may be that you
want to redefine the item in the table in this way.
--------------------------------------------------------------------------------------
AC4753 Table item name differs in name, type, length in file
Generated by: Administrator Utility
When synchronizing a file table, an item defined in the file table
had a counterpart in the file with the same offset, but the names,
types, and lengths differed. The three lines that follow set out
the differences.
This may be an error in item definition. Or it may be that you
want to redefine the item in the table in this way.
--------------------------------------------------------------------------------------
AC4754 Item name offset plus length exceeds file record length
Generated by: Administrator Utility
When synchronizing a file table, the item as defined in the file
table went past the end of the file record.
Recheck your item definition and adjust the offset and length
accordingly with the Change File Table screen.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4755 File type, unknown when table was added, is currently type
Generated by: Administrator Utility
The file table definition was added when the file was not
available. During the synchronization request, the file was found
and its type is noted here.
This message is primarily informational. No error is indicated.
--------------------------------------------------------------------------------------
AC4756 File type mismatch. Dict=name, source=name
Generated by: Administrator Utility
When the file definition was added it was one type; now, in
synchronizing tables derived from it, the current file on the
system is of a different type.
Verify that any file equations for the file are correct.
--------------------------------------------------------------------------------------
AC4757 Item name offset plus length exceeds number byte maximum
Generated by: Administrator Utility
When synchronizing a file table, the item as defined in the file
goes past the end of the maximum length record Access Server will
read (currently the first 2048 bytes of the record).
Recheck your item definition and adjust the offset and length
accordingly with the Change File Table screen.
--------------------------------------------------------------------------------------
AC4758 Record number byte number of item name has bad numeric data
Generated by: Administrator Utility
When synchronizing a file table, an item identified in the table
definition as being of type numeric showed invalid numeric data at
the specified byte in the specified record. This indicates the
first invalid byte in the item; no checking is done beyond it.
Recheck the definition of the item in the file and make any
necessary changes with the Change File Table screen. Then attempt
the synchronization again.
--------------------------------------------------------------------------------------
AC4759 Record number byte number of item name has bad zoned data
Generated by: Administrator Utility
When synchronizing a file table, an item identified in the table
definition as being of type zoned showed invalid zoned data at the
specified byte in the specified record. This indicates the first
invalid byte in the item; no checking is done beyond it.
Recheck the definition of the item in the file and make any
necessary changes with the Change File Table screen. Then attempt
the synchronization again.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4760 Record number nibble number of item name has bad packed data
Generated by: Administrator Utility
When synchronizing a file table, an item identified in the table
definition as being of type packed showed invalid packed data at
the indicated nibble in the indicated record. This indicates the
first invalid nibble in the item; no checking is done beyond it.
Recheck the definition of the item in the file and make any
necessary changes with the Change File Table screen. Then attempt
the synchronization again.
--------------------------------------------------------------------------------------
AC4761 File does not currently exist in the specified location
Generated by: Administrator Utility
While synchronizing a file table definition, the file was not
found in the group (and possibly account) specified in the file
definition. This may or may not be an error depending on how file
equations are used and whether or not the file is always present
on the system.
Make sure the file is accessible before you try to synchronize
the definitions of file tables.
--------------------------------------------------------------------------------------
AC4762 Items name and name overlap
Generated by: Administrator Utility
When synchronizing a file table definition, two items of data
types other than both C and/or N overlap. This is probably an
error in the way the DBA has defined the file table, unless it is
being done on purpose.
--------------------------------------------------------------------------------------
AC4763 Character items name and name overlap
Generated by: Administrator Utility
When synchronizing a file table definition, two items both having
data types C and/or N overlap. This may or may not be an error in
the way the DBA has defined the file table, depending on the
desired results.
--------------------------------------------------------------------------------------
AC4888 ERROR-Blank view table text file
Generated by: Administrator Utility
When adding or changing a view table definition with an editor
configured, the text file was found to contain no records upon
returning from your editor.
Be sure to leave the templates in the file. These are required
for Information Access Server to interpret the file correctly.
Also, make sure your view table contains an Item Clause and a
Using Clause.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4901 ERROR-Native Language Support error number in NLFMTCUSTDATE
Generated by: Administrator Utility
An error occurred during a call to the NLFMTCUSTDATE intrinsic
somewhere in the Administrator Utility.
Respond to the NLS error specified. If unable to resolve it,
record the exact sequence of operations leading up to the error
before you call your HP representative for assistance.
--------------------------------------------------------------------------------------
AC4902 ERROR-Native Language Support error number in NLFMTCLOCK
Generated by: Administrator Utility
An error occurred during a call to the NLFMTCLOCK intrinsic
somewhere in the Administrator Utility.
Respond to the NLS error specified. If unable to resolve it,
record the exact sequence of operations leading up to the error
before you call your HP representative for assistance.
--------------------------------------------------------------------------------------
AC4903 ERROR-Native Language Support error number in NLFMTDATE
Generated by: Administrator Utility
An error occurred during a call to the NLFMTDATE intrinsic
somewhere in the Administrator Utility.
Respond to the NLS error specified. If unable to resolve it,
record the exact sequence of operations leading up to the error
before you call your HP representative for assistance.
--------------------------------------------------------------------------------------
AC4911 ERROR-Sort error number in SORTINIT
Generated by: Administrator Utility
An error occurred during a call to the SORTINIT intrinsic
somewhere in the Administrator Utility.
Respond to the sort error specified. If unable to resolve it,
record the exact sequence of operations leading up to the error
before you call your HP representative for assistance.
--------------------------------------------------------------------------------------
AC4912 ERROR-Sort error number in SORTINPUT
Generated by: Administrator Utility
An error occurred during a call to the SORTINPUT intrinsic
somewhere in the Administrator Utility.
Respond to the sort error specified. If unable to resolve it,
record the exact sequence of operations leading up to the error
before you call your HP representative for assistance.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4913 ERROR-Sort error number in SORTOUTPUT
Generated by: Administrator Utility
An error occurred during a call to the SORTOUTPUT intrinsic
somewhere in the Administrator Utility.
Respond to the sort error specified. If unable to resolve it,
record the exact sequence of operations leading up to the error
before you call your HP representative for assistance.
--------------------------------------------------------------------------------------
AC4914 ERROR-Sort error number in SORTEND
Generated by: Administrator Utility
An error occurred during a call to the SORTEND intrinsic somewhere
in the Administrator Utility.
Respond to the sort error specified. If unable to resolve it,
record the exact sequence of operations leading up to the error
before you call your HP representative for assistance.
--------------------------------------------------------------------------------------
AC4921 ERROR-FSERR number in FOPEN on file name|
Generated by: Administrator Utility
An error occurred during a call to the FOPEN intrinsic somewhere
in the Administrator Utility.
Respond to the FSERR error specified. If unable to resolve it,
record the exact sequence of operations leading up to the error as
well as the file name specified before you call your HP
representative for assistance.
--------------------------------------------------------------------------------------
AC4922 ERROR-FSERR number in FREAD on file name
Generated by: Administrator Utility
An error occurred during a call to the FREAD intrinsic somewhere
in the Administrator Utility.
See action for AC4921.
--------------------------------------------------------------------------------------
AC4923 ERROR-FSERR number in FWRITE on file name
Generated by: Administrator Utility
An error occurred during a call to the FWRITE intrinsic somewhere
in the Administrator Utility.
See action for AC4921.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4924 ERROR-FSERR number in FCLOSE on file name
Generated by: Administrator Utility
An error occurred during a call to the FCLOSE intrinsic somewhere
in the Administrator Utility.
See action for AC4921.
--------------------------------------------------------------------------------------
AC4925 ERROR-FSERR number in FPOINT on file name
Generated by: Administrator Utility
An error occurred during a call to the FPOINT intrinsic somewhere
in the Administrator Utility.
See action for AC4921.
--------------------------------------------------------------------------------------
AC4926 ERROR-FSERR number in FCONTROL on file name
Generated by: Administrator Utility
An error occurred during a call to the FCONTROL intrinsic
somewhere in the Administrator Utility.
See action for AC4921.
--------------------------------------------------------------------------------------
AC4927 ERROR-FSERR number in FSPACE on file name
Generated by: Administrator Utility
An error occurred during a call to the FSPACE intrinsic somewhere
in the Administrator Utility.
See action for AC4921.
--------------------------------------------------------------------------------------
AC4928 ERROR-FSERR number in FFILEINFO on file name
Generated by: Administrator Utility
An error occurred during a call to the FFILEINFO intrinsic
somewhere in the Administrator Utility.
See action for AC4921.
--------------------------------------------------------------------------------------
AC4929 ERROR-FSERR number in FREADDIR on file name
Generated by: Administrator Utility
An error occurred during a call to the FREADDIR intrinsic
somewhere in the Administrator Utility.
See action for AC4921.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC4941 ERROR-MPE intrinsic error number in BINARY
Generated by: Administrator Utility
An error occurred during a call to the BINARY intrinsic somewhere
in the Administrator Utility.
Respond to the intrinsic error specified. If unable to resolve
it, record the exact sequence of operations leading up to the
error and call your HP representative.
--------------------------------------------------------------------------------------
AC4942 ERROR-MPE intrinsic error number in DMOVOUT
Generated by: Administrator Utility
An error occurred during a call to the DMOVOUT intrinsic somewhere
in the Administrator Utility.
See action for AC4941.
--------------------------------------------------------------------------------------
AC4943 ERROR-MPE intrinsic error number in DMOVIN
Generated by: Administrator Utility
An error occurred during a call to the DMOVIN intrinsic somewhere
in the Administrator Utility.
See action for AC4941.
--------------------------------------------------------------------------------------
AC4944 ERROR-MPE intrinsic error number in GETDSEG
Generated by: Administrator Utility
An error occurred during a call to the GETDSEG intrinsic somewhere
in the Administrator Utility.
See action for AC4941.