HP 3000 Manuals HP 3000 Manuals
EXITWARN
Warns that a subsystem needs to be validated before exiting NMMGR.
Syntax
EXITWARN subsystem [ON or OFF]
Parameters
subsystem The name of a configuration subsystem to which
messages will be issued. Currently NETXPORT, DTS,
or IBM is allowed.
ON This is the default and need
not be specified. It
indicates that an exit
message is to be enabled for
the specified subsystem.
OFF Indicates that an exit
message is to be disabled for
the specified subsystem.
Description
Automatically warns you that validation needs to be performed for the
selected subsystem(s) when you attempt to exit NMMGR. NMMGR will note
that validation is needed whenever a configuration is changed without
being validated. Output is directed to the formal designator FORMLIST,
which defaults to $STDLIST.
If the configuration is not validated, NMMGR will return you back to
screen mode instead of exiting. If you want to exit, use the EXIT
command or press the EXIT function key (on the OPEN screen) again.
By default, exit warning is enabled for the all subsystems.
Example
NMMGR>EXITWARN DTS