5.3 Listing the System Configuration

1. Check that all hardware peripherals are attached and powered on.

2. Start ODE.

   
     ISL>ODE
   
   

3. Display hardware configuration.

   
     ODE>RUN MAPPER
   
     ODE>RUN MAPPER2 (for N-Class and A-Class systems)
   
   

   The figure on the following page is a sample of a MAPPER display.

4. Record the I/O configuration for your system.

   Find the MPE/XL Model String. Then refer to Appendix B Configuration Tables for the configuration group name for your HP e3000 model in the SCSI column. For example, for a Model 995, the SCSI group is CONFG995. It is very important to have the exact group name. Check carefully for numbers zero and 1 and letters O and I.

5. Exit mapper.

   
     ODE>EXIT
   
   

   Figure 5-1 Sample Listing MAPPER Output

   
     STARTING EXECUTION OF MAPPER
   
     Processor Identification:
         Hardware Model:  590H, Revision: 0
         Software Model:  4H, Revision:  0
         Hardware ID:  0, Software ID:  250911381 (unsigned decimal)
         Software Cap:  0x10000031
         MPE/XL Model String: 979-400
         Processor Board Revisions:
             CPU - CPU Chip:                   769
             PDC - Processor Dependent Code:   38.29
         Cache and TLB Sizes:
             Instruction Cache:  1024 K bytes, Instruction TLB:  96 entries
             Data Cache:         1024 K bytes, Data TLB:         96 entries
         Co-processors:
             Floating Point Co-processor is installed
   
     I/O Configuration:
                                                  Type  HW    SW    Revisions
     Path       Component Name                     ID    Mod   Mod   Hdwr  Firm  
     --------- ---------------------------------- ----- ----- ----- ----- -----
     8          I/O Adapter                         CH    580H  BH    15    1
     8/63       GSC+ Port                           7H    501H  CH    1     3
     10         I/O Adapter                         CH    580H  BH    15    1
     10/4       Upper Bus Converter                 7H    500H  CH    0     0
     10/4/0     HP-PB LAN/Console                   2H    5H    60H   0     1
     10/4/4     HP-PB Fast Wide SCSI                4H    4H    3BH   0     0
     10/4/4.2.0    SEAGATE ST318275LC               -     -     -     -     HP00
     10/4/4.3.0    SEAGATE ST39175LC                -     -     -     -     HP00
     10/4/4.4.0    SEAGATE ST39175LC                -     -     -     -     HP00
     10/4/8     HP-PB SCSI                          4H    4H    39H   0     0
     10/4/8.0.0    SEAGATEST32550N disk drive       -     -     -     -     HP10
     10/4/8.1.0    SEAGATE ST34572WC                -     -     -     -     HP01
     10/4/8.2.0    SEAGATE ST32272WC                -     -     -     -     HP01
     10/4/9     HP-PB Centronics                    5H    4H    3AH   0     0
     10/4/20    HP-PB SCSI                          4H    5H    39H   0     0
     10/4/20.0.0    HPC1533A/C1530B tape drive      -     -     -     -     AN04
     10/4/20.1.0    HPC1533A/C1530B tape drive      -     -     -     -     AN04
     10/4/24    HP-PB Fast Wide SCSI                4H    5H    3BH   0     0
     10/4/24.3.0    SEAGATE ST34371W disk drive     -     -     -     -     HPM2
     10/4/24.4.0    SEAGATE ST34371W disk drive     -     -     -     -     HPM2
     10/4/24.5.0    Quantum XP34361WD               -     -     -     -     HP10
     10/4/24.6.0    SEAGATE ST34371W disk drive     -     -     -     -     HPM4
     10/4/60    HP-PB Port                          7H    103H  CH    0     0
     10/16      Upper Bus Converter                 7H    500H  CH    0     0
     10/16/60   HP-PB Port                          7H    103H  CH    0     0
     10/63      GSC+ Port                           7H    501H  CH    1     3
     32         MoHawk Processor                    0H    590H  4H    0     0
     34         MoHawk Processor                    0H    590H  4H    0     0
     36         MoHawk Processor                    0H    590H  4H    0     0
     38         MoHawk Processor                    0H    590H  4H    0     0
     49         Memory (1024 M bytes)               1H    32H   9H    0     0
                  Extender 0
                     slot 0A/0B   bank  3:  64MB
                                  bank  8:  64MB
                     slot 1A/1B   bank  7:  64MB
                                  bank 12:  64MB
                     slot 2A/2B   bank  4:  64MB
                                  bank 15:  64MB
                     slot 3A/3B   bank  0:  64MB
                                  bank 11:  64MB
                     slot 4A/4B   bank  5:  64MB
                                  bank 14:  64MB
                     slot 5A/5B   bank  1:  64MB
                                  bank 10:  64MB
                     slot 6A/6B   bank  2:  64MB
                                  bank  9:  64MB
                     slot 7A/7B   bank  6:  64MB
                                  bank 13:  64MB
     
     RUN COMPLETED.
   
   

• Listing the System Configuration completed. Go to the next section on your checklist.