L2Resolve is part of the process between NS Transport and SNA Transport which
provides NS over SNA/XL functionality.
MESSAGE: None
Level: 1 Log Class 2
CAUSE: Unable to send connect request.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 2 Log Class 2
CAUSE: Unable to send disconnect request.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 3 Log Class 2
CAUSE: Unable to send verify path message to NetCP.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 4 Log Class 2
CAUSE: Unable to send disconnect device message to NetCP.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 7 Log Class 2
CAUSE: Control Block data structure cannot be freed on
a reset connection.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 9 Log Class 2
CAUSE: Connect reply not completed because MAP entry cannot
be added.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 10 Log Class 2
CAUSE: Unable to update MAP table for rejection of connection
request.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 12 Log Class 2
CAUSE: Unable to send connect request.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 14 Log Class 2
CAUSE: Unable to update MAP table for a connection reset.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 15 Log Class 3
CAUSE: A connection request has been rejected.
ACTION: Informative message. The network has been shut down, or a
connection request has been refused by the other end.
MESSAGE: None
Level: 17 Log Class 2
CAUSE: Invalid request from upper layers in current state.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 18 Log Class 2
CAUSE: Invalid request from lower layers in current state.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 19 Log Class 3
CAUSE: Reject of an incoming connection request because
maximum number of connections active.
ACTION: A maximum of 64 connections is allowed. Retry
connection after one has been closed.
MESSAGE: None
Level: 21 Log Class 3
CAUSE: Connect event message before L2Resolve is fully
operational.
ACTION: Wait for L2Resolve to finish initialization and try the
connection again. If the problem persists, see
Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 22 Log Class 2
CAUSE: Incoming connect reply before L2Resolve is fully
operational.
ACTION: Wait for L2Resolve to finish initialization and try the
connection again. If the problem persists, see Appendix
A "Submitting a CR" of this manual.
MESSAGE: None
Level: 23 Log Class 2
CAUSE: Incoming disconnect reply; maximum connections exceeded.
ACTION: A maximum of 64 connections is allowed. Wait until one
connection is closed and try again. If the problem persists, see
Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 24 Log Class 2
CAUSE: Incoming disconnect reply before L2Resolve is fully
operational.
ACTION: Wait for L2Resolve to finish initialization and try the
connection again. If the problem persists, see
Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 25 Log Class 2
CAUSE: Incoming disconnect before L2Resolve is fully operational.
ACTION: Wait for L2Resolve to finish initialization and try the
connection again. If the problem persists, see
Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 26 Log Class 2
CAUSE: Unknown event before L2Resolve is fully operational.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 27 Log Class 2
CAUSE: Outbound connect request would exceed maximum number
of connections.
ACTION: A maximum of 64 connections is allowed. Wait until
a connection is closed and try again.
MESSAGE: None
Level: 28 Log Class 2
CAUSE: Connect reply received for an unknown connection.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 29 Log Class 2
CAUSE: Disconnect reply message when maximum number of connections
exceeded.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 30 Log Class 2
CAUSE: Disconnect reply received for an unknown connection.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 31 Log Class 2
CAUSE: Disconnect request received for an unknown connection.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 32 Log Class 2
CAUSE: Invalid connect/disconnect message.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 33 Log Class 3
CAUSE: Outbound connection request during network shutdown.
ACTION: Informative message. The network must be started
for successful connection.
MESSAGE: None
Level: 34 Log Class 2
CAUSE: Connection reply for an unknown connection.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 35 Log Class 2
CAUSE: Disconnect reply for an unknown connection and
maximum number of connections exceeded.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 36 Log Class 2
CAUSE: Disconnect reply message received for an unknown connection.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 37 Log Class 2
CAUSE: Disconnect request received for an unknown connection.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 38 Log Class 2
CAUSE: Unknown connect/disconnect message during shutdown.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 39 Log Class 2
CAUSE: L2Resolve is terminating with outstanding requests.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 40 Log Class 2
CAUSE: Connection is active while L2Resolve is terminating.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 42 Log Class 4
CAUSE: L2Resolve is terminating.
ACTION: Informative message.
MESSAGE: None
Level: 43 Log Class 2
CAUSE: L2Resolve deletion from MAP is unsuccessful during
a device disconnect.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 44 Log Class 2
CAUSE: L2Resolve cannot be bound into MAP table.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 45 Log Class 4
CAUSE: L2Resolve is starting.
ACTION: Informative message.
MESSAGE: None
Level: 46 Log Class 2
CAUSE: Invalid message type for current L2Resolve state.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 47 Log Class 2
CAUSE: Error in starting or stopping L2Resolve.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 48 Log Class 2
CAUSE: Invalid message type received by L2Resolve.
ACTION: See Appendix A "Submitting a CR"
of this manual.