Level: 1 CLAS0002
CAUSE: Received a port message containing an invalid format
code or an invalid function code (PARM = complete function code).
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 3 CLAS0004
CAUSE: Log port initiation.
ACTION: Informative.
MESSAGE: None
Level: 10 CLAS0002
CAUSE: Encountered a buffer manager failure attempting
to read the address alias list from the buffer passed in a DCN Start
message (PARM = READBUF result code).
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 11 CLAS0002
CAUSE: Encountered a buffer manager error attempting to return the
buffer passed in a DCN Start message (PARM = FREEBUF result code).
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 12 CLAS0002
CAUSE: There is not enough room for an entry in the DCN
Table for the network started in a DCN Start message. Space is allocated
based on the maximum number of directly connected networks (DCNs).
ACTION: Shut down the transport (NETCONTROL STOP). Check
the configuration file for a disparity between networks configured and
maximum DCNs specified.
MESSAGE: None
Level: 13 CLAS0002
CAUSE: Encountered a buffer manager error attempting to
get the length of the buffer passed in a DCN Start message (PARM
= BUFFERINFO result code).
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 14 CLAS0002
CAUSE: The length of the address alias list passed in
a DCN Start message exceeds the space allocated for the list in
the IPC port DST. The space is allocated based on the maximum number
of directly connected networks (DCNs).
ACTION: Shut down the transport (NETCONTROL STOP). Check
the configuration file for a disparity between the number of networks
configured and maximum networks specified.
MESSAGE: None
Level: 15 CLAS0002
CAUSE: Network number in a Stop Net message not found
in the DCN table (never started).
ACTION: Error probably occurred when starting the network.
See error 12.
MESSAGE: None
Level: 16 CLAS0006
CAUSE: Log statistics prior to port termination (PARM unused).
ACTION: Informative.
MESSAGE: None
Level: 18 CLAS0002
CAUSE: Encountered buffer manager error attempting to
return the buffers on message queues before terminating the port
(PARM = FREEBUF result code).
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 19 CLAS0004
CAUSE: Indicates termination of the IPU port.
ACTION: Informative message.
MESSAGE: None
Level: 20 CLAS0002
CAUSE: A routing update indicates that a network is now
reachable but there is not enough room in the distance matrix table
to record it (PARM unused).
ACTION: Reconfigure to increase maximum networks on the
IP Update protocol screen.
MESSAGE: None
Level: 25 CLAS0002
CAUSE: Could not process a network shutdown routing update
because gateway in the routing update could not be found in the
distance matrix table (PARM unused).
ACTION: Should not happen normally. Probable cause is
an inability to process a network start routing update (because
of lack of table space) that would have put the gateway into the
distance matrix.
MESSAGE: None
Level: 27 CLAS0002
CAUSE: Could not process a network routing update because
there was not enough room in an internal gateway index table (PARM unused).
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 28 CLAS0002
CAUSE: Could not process a network start routing update because
there was not enough room in the distance matrix table (PARM unused).
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 29 CLAS0002
CAUSE: Could not process a network start routing update because
the count of networks in the routing update exceeded configured
maximum networks.
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 30 CLAS0002
CAUSE: Encountered an internal error attempting to return
a routing update buffer (PARM = BFMFREEBUF result code).
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 41 CLAS0002
CAUSE: IPU Port Initialization unsuccessful (PARM = Semaphore
Initialization result or result code trying to add IPU to Registry).
ACTION: See Appendix A "Submitting a CR"
of this manual.
MESSAGE: None
Level: 42 CLAS0002
CAUSE: Failure to lock IPU routing table.
ACTION: See Appendix A "Submitting a CR"
of this manual.