|
|
|
| MESSAGE: None |
| Level: 1 CLAS0002
CAUSE: A port message was received containing an invalid
function code (PARM = function code).
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 3 CLAS0004
CAUSE: ARP protocol started.
ACTION: Informative message. |
| MESSAGE: None |
| Level: 12 CLAS0003
CAUSE: An ARP packet with a bad ARP header was received
from the link.
ACTION: Either the packet was corrupted in transit or a remote
node is not transmitting packets correctly. If the latter case is suspected,
see Appendix A "Submitting a CR" of this
manual. |
| MESSAGE: None |
| Level: 27 CLAS0004
CAUSE: ARP protocol started.
ACTION: Informative message. |
| MESSAGE: None |
| Level: 28 CLAS0006
CAUSE: ARP statistics are logged prior to port termination.
ACTION: Informative message. |
| MESSAGE: None |
| Level: 42 CLAS 0002
CAUSE: Received a new (different) station address mapping for our
own IP address. This means someone else is using our IP address.
ACTION: Locate the node with the duplicate IP
address. |
| MESSAGE: None |
| Level: 44 CLAS0002
CAUSE: Call to MAP_ADD_ENTITY failed trying to add ARP
entity to the MAP table.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 49 CLAS0002
CAUSE: Call to MAP_LAN_UPDATE failed due to MAP
internal error.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 54 CLAS0002
CAUSE: Unable to create object for ARP port data area.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 55 CLAS0002
CAUSE: Failed to locate ARP's ICS filter routine
in NL.PUB.SYS.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 56 CLAS0002
CAUSE: Failed to locate ARP's timer routine in NL.PUB.SYS.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 57 CLAS0002
CAUSE: Failed to locate ARP's port procedure
in NL.PUB.SYS.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 59 CLAS0002
CAUSE: LAN_STATION_ADDRESS did not return the local
station address for the link.
ACTION: Issue LINKCONTROL command on the link. Verify that
the station address is valid. If the station address is valid, see
Appendix A "Submitting a CR" of
this manual. |
| MESSAGE: None |
| Level: 60 CLAS0002
CAUSE: MAP_DEL_ENTITY failed due to an internal error in
MAP.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 61 CLAS0002
CAUSE: Unable to send terminate message to the Control Process.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 62 CLAS0002
CAUSE: Received an unexpected message during the ARP
module termination.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 64 CLAS0002
CAUSE: Unable to read ARP's configuration data.
ACTION: Verify that the NMCONFIG.PUB.SYS file exists.
If the file exists, see Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 65 CLAS0002
CAUSE: Failed to send ARP request out over the network.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 66 CLAS0002
CAUSE: Failed to send ARP request out over the network.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 67 CLAS0002
CAUSE: An attempt to get a buffer failed due to an internal
error in the buffer manager.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 68 CLAS0002
CAUSE: Unable to deallocate timers due to internal errors
in the network timers module.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 69 CLAS0002
CAUSE: Unable to deallocate timers due to internal errors
in the network timers module.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 70 CLAS0002
CAUSE: Unable to reset a timer due to an internal error
in the network timers module.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 71 CLAS0002
CAUSE: Unable to deallocate timers due to internal errors
in the network timers module.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 72 CLAS0002
CAUSE: Unable to abort a buffer pending request during
ARP module termination.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 73 CLAS0002
CAUSE: A frame too small to be an ARP packet arrived
with an ARP etype.
ACTION: Either the packet was corrupted in transit or a remote
node is not transmitting packets correctly. If the latter case is suspected,
see Appendix A "Submitting a CR" of this
manual. |
| MESSAGE: None |
| Level: 74 CLAS0002
CAUSE: Failed to update the NS Registry with ARP's port.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 76 CLAS0002
CAUSE: Failed to send ARP reply out over the network.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 77 CLAS0002
CAUSE: Failed to send ARP retransmission out over the network.
ACTION: See Appendix A "Submitting a CR"
of this manual. |
| MESSAGE: None |
| Level: 78 CLAS0002
CAUSE: Configuration data is corrupt.
ACTION: Create a new configuration file. If that doesn't resolve
the problem, see Appendix A "Submitting a CR"
of this manual. |
|
Complete PDF