HPlogo Communicator e3000 MPE/iX Release 7.0 (Software Release C.70.00) > Appendix E CD-ROM Resources

Specifying the Base Configuration Group

MPE documents

Complete PDF
Table of Contents
Glossary
Index

MPE/iX provides default configuration groups for each hardware model. For example, names of some of the groups are confg950, confg930, and confg922 and they are located in the SYS account. When you set up your system, you normally use one of the default configuration groups to begin with and modify it so it matches the exact configuration of the system. This procedure is explained in detail in Performing System Management Tasks.

When using HPINSTAL to create a CSLT for another system, you can create a CSLT for a different configuration group to be used on the remote system. When HPINSTAL displays the following text, you are able to specify the configuration group of your choice. 

  You have chosen to create a CSLT for a remote system. You can
  specify the configuration group that you want to be used to make
  the tape. By doing so, system files that are part of that
  configuration will be placed on the CSLT for the remote site.
  Please realize that HPINSTAL will create the CSLT with the SYSGEN
  command 'TAPE NOCONFIG'.
  When ready to create the CSLT, HPINSTAL will copy your current
  configuration group to HPCONFIG.SYS and use that as the base
  group. If you have customized a configuration group that you
  would like HPINSTAL to use as the base group while creating the
  CSLT, please provide it now.
  Base group (RETURN for default) >> [[Return]]
You should press [RETURN], unless you plan to add installation-specific files to the CSLT. Refer to "Preparing a Base Group for a Remote System" for how to set up the base group.



Including Additional STORE Files on the CSLT

Preparing a Base Group for a Remote System