HPIB Adapter Manager
(Subsystem 116)
MPE documents | |
 Complete PDF | |
| Table of Contents | |
| E0701 Volume II | |
| E0300 Volume I | |
| E0300 Volume II | |
| E0300 Volume III ♥ | |
| E0394 Volume I | |
| E0796 Volume II | |
| E0494 Volume III |
- 1
- MESSAGE
The READ transaction was terminated by END or IDENTIFY (EOI) with an even number of bytes transferred.
- 2
- MESSAGE
The READ transaction was terminated by END or IDENTIFY (EOI) with an odd number of bytes transferred.
- 3
- MESSAGE
The READ transaction was terminated by COUNT; the COUNT was even.
- 4
- MESSAGE
The READ transaction was terminated by COUNT; the COUNT was odd.
- 5
- MESSAGE
The READ transaction was terminated by LINE-FEED; the COUNT was even.
- 6
- MESSAGE
The READ transaction was terminated by LINE-FEED; the COUNT was odd.
- 7
- MESSAGE
The READ transaction was terminated by SECONDARY ADDRESS; the COUNT was even.
- 8
- MESSAGE
The READ transaction was terminated by the SECONDARY ADDRESS; the COUNT was odd.
- 9
- MESSAGE
The transaction was terminated by the host; the data transfer to host was terminated by Channel END (CEND) instead of Device END (DEND).
- 10
- MESSAGE
The HPIB DAM has detected a time-out when identifying a device.
- 129
- MESSAGE
The HPIB DAM has received an unknown TSTATUS.
- 137
- MESSAGE
The HPIB DAM has detected an error in its internal REQ_INFO_ENTRY; an entry is currently in use.
- 138
- MESSAGE
The HPIB DAM has detected an error in its internal REQ_INFO entry; an incorrect user ID is detected.
- 139
- MESSAGE
The HPIB DAM has detected an error in its internal RS_BLOCK; an incorrect use of RS_BLOCK_PTR.
- 140
- MESSAGE
The HPIB DAM has detected an error in its internal RS_BLOCK; an entry of RS_BLOCK is currently in use.
- 141
- MESSAGE
The HPIB DAM has detected an error in its internal RS_BLOCK; an entry with incorrect use of user ID.
- 142
- MESSAGE
The HPIB DAM has detected no internal user ID available.
- 143
- MESSAGE
The HPIB DAM has detected its internal REQ_INFO TABLE integrity error.
- 144
- MESSAGE
The HPIB DAM has detected an error in its internal DM_TABLE; table integrity error.
- 145
- MESSAGE
The HPIB DAM has detected an error in its internal DAM_TABLE; table integrity error.
- 146
- MESSAGE
The HPIB DAM has detected internal fatal software error.
- 154
- MESSAGE
The HPIB device adapter has detected a timeout during a detailed report phase; it can be either in command, execution, or report phase. The device adapter also detected a second timeout while trying to send UNTALK or UNLISTEN commands.
- 155
- MESSAGE
The HPIB device adapter has detected a timeout during a detailed report phase; it can be either in command, execution, or report phase. The device adapter is also no longer a CONTROLLER-IN-CHARGE (CIC).
- 156
- MESSAGE
The HPIB device adapter has detected a timeout during a detailed report; it can occur either in command, execution, or report phase.
- 157
- MESSAGE
The HPIB device adapter has detected a timeout during a CS80 reporting phase, and it also has detected a second timeout while trying to send UNTALK or UNLISTEN commands.
- 158
- MESSAGE
The HPIB device adapter has detected a timeout during a CS80 reporting phase, and it is no longer a CONTROLLER-IN-CHARGE (CIC).
- 159
- MESSAGE
The HPIB device adapter has detected a timeout during a CS80 reporting phase.
- 160
- MESSAGE
The HPIB device adapter has detected a timeout during a CS80 execution phase, and it has also detected a second timeout while trying to send UNTALK or UNLISTEN commands.
- 161
- MESSAGE
The HPIB device adapter has detected a timeout during a CS80 execution phase, and the device adapter is no longer a CONTROLLER-IN-CHARGE (CIC).
- 162
- MESSAGE
The HPIB device adapter has detected a timeout during a CS80 execution phase.
- 163
- MESSAGE
The HPIB device adapter has detected a timeout during a CS80 command phase, and it has also detected a second timeout while trying to send UNTALK or UNLISTEN commands.
- 164
- MESSAGE
The HPIB device adapter has detected a timeout during a CS80 command phase, and it is no longer a CONTROLLER-IN-CHARGE (CIC).
- 165
- MESSAGE
The HPIB device adapter has detected a timeout during a CS80 command phase.
- 166
- MESSAGE
The HPIB device adapter has detected that the data portion of the CS80 request block was missing from the request phase.
- 192
- MESSAGE
The HPIB device adapter has detected a timeout during a CS80 execution phase.
- 205
- MESSAGE
The HPIB device adapter has been set to a different block size transferred. The block size has to be reset first before setting to a desired value. Other device(s) may be doing the block size transferred.
- 206
- MESSAGE
The HPIB DAM has currently exceeded the maximum number of the concurrent I/O transactions. It can only support 8 concurrent I/Os at any one time.
- 210
- MESSAGE
The HPIB device adapter has detected that the DEVICE ADAPTER PROGRAM (DAP) length exceeds its maximum limit - DAP length greater than 512 bytes limit.
- 211
- MESSAGE
The HPIB device adapter has detected an illegal DEVICE ADAPTER LANGUAGE (DAL) opcode.
- 212
- MESSAGE
The HPIB device adapter has detected a DEAD-OR-DYING or PROTOCOL error.
- 213
- MESSAGE
The HPIB device adapter did not return any hardware TSTATUS.
- 214
- MESSAGE
The HPIB device adapter has failed its internal self test.
- 215
- MESSAGE
The HPIB device adapter has failed to identify as an Advanced HPIB Device Adapter Interface.
- 216
- MESSAGE
The HPIB device adapter failed its internal self test.
- 217
- MESSAGE
The HPIB device adapter function can not be done because PARALLEL POLL (PPOLL) interrupt is enabled. It can be returned in response to a setting of ATTENTION (ATN) FALSE in the transaction.
- 218
- MESSAGE
The HPIB device adapter has detected that the LOOPBACK functional test failed.
- 219
- MESSAGE
The HPIB device adapter outbound data is frozen due to presence of inbound data on the device adapter; it will not happen when the device adapter is CONTROLLER-IN-CHARGE (CIC).
- 220
- MESSAGE
The HPIB device adapter has detected an INTERFACE CLEAR (IFC) abort of data transfer.
- 221
- MESSAGE
The HPIB device adapter has detected an HPIB DEVICE CLEAR (DCL).
- 222
- MESSAGE
The HPIB transaction requires device adapter to be either addressed or not CONTROLLER-IN-CHARGE (CIC). Presently, it is NOT in either case.
- 223
- MESSAGE
The HPIB device adapter is CONTROLLER-IN-CHARGE (CIC) and it should not be.
- 224
- MESSAGE
The HPIB device adapter is not CONTROLLER-IN-CHARGE and it should be.
- 225
- MESSAGE
The HPIB device adapter is not configured to be a SYSTEM CONTROLLER (SC) and it should be.
- 226
- MESSAGE
The HPIB device adapter transaction function code is either NOT implemented or NOT supported.
- 227
- MESSAGE
The HPIB device adapter has detected that no DEVICE ADAPTER PROGRAM (DAP) has been downloaded. This error is given when an execute downloaded DAP function is attempted before the DAP has been previously downloaded.
- 228
- MESSAGE
The HPIB current DEVICE ADAPTER PROGRAM (DAP) is still in use.
- 229
- MESSAGE
The HPIB Device Adapter Program (DAP) has detected a device locked during error report/recovery.
- 230
- MESSAGE
The HPIB device adapter has detected the failure of the DEVICE ADAPTER PROGRAM (DAP) being downloaded.
- 244
- MESSAGE
The HPIB DAM has detected an ERROR when it tries to get virtual quads for this I/O request.
- 245
- MESSAGE
The HPIB DAM has detected an error when it tries to get a message frame; IO_GET_FRAME error.
- 246
- MESSAGE
The HPIB DAM has run out of its internal software resources; FATAL internal error.
- 248
- MESSAGE
The HPIB DAM has detected an error from the CAM when checking the I/O pointers.
- 249
- MESSAGE
The HPIB DAM has detected an error from the CAM; CAM has no resources available.
- 250
- MESSAGE
The HPIB DAM has detected that the I/O request has been aborted.
- 251
- MESSAGE
The CHANNEL ADAPTER MANAGER has returned an error in the low level status.
- 252
- MESSAGE
The HPIB DAM has detected that the I/O request has been aborted.
- 253
- MESSAGE
The CHANNEL ADAPTER MANAGER has no resources available.
- 254
- MESSAGE
The CHANNEL ADAPTER MANAGER has detected an error in the I/O request pointers.
|
High Level I/O (Subsystem 111) |
HPIO Channel Manager (Subsystem 114) |