Chapter 12 Store/Restore (Native Mode) and TurboSTORE/iX III

! NOT STORED: READ ACCESS REQUIRES USER TO KNOW THE LOCKWORD

User must know the lockword to access the file.

Ask the account/system manager to store the file.

! NOT STORED: USER DOES NOT HAVE READ ACCESS

The operation requires that you have Read Access to the file.

Request your system manager to store the file.

! NOT STORED: READ ACCESS REQUIRES (AM) CAPABILITY

User lacks AM capability required to access the file.

Ask the account/system manager to store the file.

! NOT STORED: READ ACCESS REQUIRES (SM) CAPABILITY

User lacks SM capability required to access the file.

Ask the system manager to store the file.

! NOT STORED: READ ACCESS REQUIRES (GL) CAPABILITY

User lacks GL capability required to access the file.

Ask the account/system manager to store the file.

! NOT STORED: READ ACCESS REQUIRES USER TO BE A MEMBER OF THE GROUP WHERE THE FILE RESIDES.

User must be a group member to access the file.

Ask the account/system manager to store the file.

! NOT STORED: READ ACCESS REQUIRES (AL) CAPABILITY

User lacks AL capability required to access the file.

Ask the account/system manager to store the file.

! NOT STORED: READ ACCESS REQUIRES (PM) CAPABILITY

User lacks PM capability required to access the file.

Ask the account/system manager to store the file

! COULD NOT BE CLOSED DURING ABNORMAL TERMINATION

Store could not close this file during abnormal termination.

Call your support representative.

FILE MAY BE INACCESSIBLE OR BECOME INCONSISTANT IF ACCESSED

Store could not close the file in a consistent state.

Call your support representative.

! COULD NOT BE RELEASED FROM STORE EXCLUSIVE ACCESS (LAT)

The file could not be released from global locking table.

Call your support representative.

! NOT STORED: ENCOUNTERED OPEN FAILURE ON FILE

Store locked the file but failed to open it.

Call your support representative.

! COULD NOT BE CLOSED DURING STORE OPERATION

Store encountered an error trying to close the file.

Call your support representative.

! NOT PURGED: STORE COULD NOT GAIN OPEN ACCESS TO THE FILE

File security violation or file is in use.

Check your capabilities, file security and if file is in use.

! NOT PURGED: LOCKWORD VIOLATION ENCOUNTERED ON FILE OPEN

Incorrect lockword was supplied to FOPEN.

Retry with correct lockword.

! NOT PURGED: FILE IS PROBABLY IN USE SINCE CLOSE FAILED

File is opened by some other user.

Check if file is in use and retry.

! NOT FULLY STORED: DISC READ FAILURE

Data could not be obtained from the disk.

Call your support representative.

! NOT FULLY STORED: INCOMPLETE DATA ON MEDIA

Data could not be obtained from the disk.

Call your support representative.

! NOT PURGED: LABEL MANAGEMENT ENCOUNTERED ERROR ACCESSING FILE LABEL

Someone purged the file before STORE could try.

Check that the file is purged.

! NOT STORED: FILE IS NOT IN SPECIFIED SPLIT VOLUME SET LIST "SPLITVS"

This particular file cannot be stored because it cannot be found in the split volume set.

Verify that the file resides in the specified split volume set and retype the command.

! NOT STORED: FILE IS NOT IN ANY SPECIFIED VOLUME SET LIST "ONVS OR SPLITVS"

This particular file is not stored becuase it cannot be found either on the specified volumeset or the split volumeset.

Make sure the file exists and retype the command.

! NOT STORED : FILE IS NOT ARCHIVABLE.

The non-archive bit is on for the specified file, meaning that it cannot by copied by STORE.

Remove these files from your STORE command, or ignore the warnings.

STORE ENCOUNTERED INTERNAL ERROR ON PREFETCH.

Internal error occurred during STORE operation.

Contact your HP Support Representative for further assistance.

! NOT STORED: STATE CHANGE DATE IS !

The file did not satisfy the date >= criteria.

Check the file's state change date and option date.

! NOT STORED: ACCESS CHECK ROUTINE TRAPPED

Internal error occurred during store.

Contact your HP Support representative.

! NOT STORED: ACCOUNT NAME REDIRECTION REQUIRES (SM,OP) CAPABILITY

The user does not have the capability to rename all parts of the file specified by '!'. STORE continues without storing this file.

Ask the system administrator or system operator to store the desired redirected files.

! NOT STORED: CREATOR NAME REDIRECTION REQUIRES (SM,OP,AM) CAPABILITY

The user does not have the capability to rename the creator of the file specified by '!'. STORE continues without storing this file.

Ask the system administrator or system operator to store the desired redirected files.

! NOT STORED: CREATOR NAME REDIRECTION CANNOT BE DONE TO SPOOL FILES

No user may rename the creator of a spool file. File, group, and account renaming is acceptable however the user must have the appropriate capabilities in order to do so. STORE continues without storing this file.

Information only. Do not try to rename the creator of spool files in future STORE commands.

! NOT STORED: FILE NAME REDIRECTION REQUIRES THE USER TO BE FILE CREATOR

The user does not have the capability to rename the file specified by '!'. STORE continues without storing this file.

Ask the creator of the file to store this file for you. Or, remove the file from your input file list.

! WILL BE STORED WITH ACD: ACD CANNOT BE DELETED AS INTENDED BY OPTION NOACD.

ACD is a required component of this file, so the file will be stored with ACD.

Information only, no action required.

! NOT RESTORED : ACCESS CHECK ROUTINE TRAPPED

This particular file was not restored due to internal error.

Contact your HP Support Representative for further assistance.

! NOT RESTORED : ACD DELETION (NOACD) DENIED

User does not have the proper capability to delete ACD.

Have operator restore file.

! NOT STORED: SOURCE NAME DOES NOT HAVE COMPONENT FOR SUBSTITUTION

A wildcard in redirected filename does not have corresponding part in source name.

Ensure that wildcards in redirected pathname has an equivalent component in source pathname.

! NOT STORED: TARGET NAME IS NOT LEGAL MPE FILE NAME

You have entered an invalid target name for RENAME option.

Retype the command and include a valid target file name.

STORE OPERATION IS !% COMPLETE (S/R 1701)

Store progress timer interrupt.

None.

STORE ENCOUNTERED SYNCHRONIZATION ERROR REWRITING MEDIA. (S/R 1702)

Store internal errors.

Call your Hewlett-Packard Support Representative.

READ FAILURE STARTED AT BYTE OFFSET ! FOR ! BYTES. (S/R 1705)

Data could not be obtained from the disk.

Call your Hewlett-Packard Support Representative.

STORE ENCOUNTERED ERROR OBTAINING VOLUMESET ID OF THE SYSTEM: VOLUME MANAGEMENT ERROR !. (S/R 1709)

Store got bad system volume set id during directory scan.

Call your Hewlett-Packard Support Representative.

STORE ENCOUNTERED ERROR OBTAINING VOLUMESET DIRECTORY INFORMATION: VOLUME MANAGEMENT ERROR !. (S/R 1710)

Store encountered error during directory scan phase.

Call your Hewlett-Packard Support Representative.

STORE ENCOUNTERED ERROR CREATING THE DIRECTORY ACCOUNTING STRUCTURE MAP FOR THE VOLUMESET "!". (S/R 1711)

Store failed to create the directory map.

Call your Hewlett-Packard Support Representative.

WARNING AN EMPTY FILESET WAS FOUND, '@' WILL BE ASSUMED. (S/R 1712)

File set was not specified so default is assumed.

If you do not want the default then abort and retry.

NO FILES WERE FOUND TO STORE BASED ON THE SELECTION CRITERIA. (S/R 1713)

No files matched the file set definition.

Check the file set and use listf to see if they exist.

TOO FEW FILES (!) WERE FOUND TO BE DISTRIBUTED ACROSS ! STORE SETS. (S/R 1714)

The number of files to be stored is less than number of store sets.

Use lesser number of store sets.

STORE CANNOT OPEN 'SYSLIST' AS A NEW FILE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED. (S/R 1716)

A file equation equates syslist to a new file.

Change the file equation to an acceptable format.

STORE CANNOT OPEN 'SYSLIST' AS A NEW "REMOTE" FILE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED (S/R 1717)

A file equation equates syslist to a new remote file.

Change the file equation to an acceptable format.

STORE CANNOT OPEN 'SYSLIST' AS A "REMOTE" SPOOLFILE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED. (S/R 1718)

A file equation equates syslist to a remote spool file.

Change the file equation to an acceptable format.

STORE CANNOT OPEN 'SYSLIST' AS A "REMOTE" DEVICE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED (S/R 1719)

A file equation equates syslist to a remote device.

Change the file equation to an acceptable format.

STORE CANNOT OPEN 'OFFLINE' AS A NEW FILE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED. (S/R 1720)

A file equation equates offilne to a new file.

Change the file equation to an acceptable format.

STORE CANNOT OPEN 'OFFLINE' AS A NEW "REMOTE" FILE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED. (S/R 1721)

A file equation equates offline to a remote file.

Change the file equation to an acceptable format.

STORE CANNOT OPEN 'OFFLINE' AS A "REMOTE" SPOOLFILE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED. (S/R 1722)

A file equation equates offline to a remote spool file.

Change the file equation to an acceptable format.

STORE CANNOT OPEN 'OFFLINE' AS A "REMOTE" DEVICE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED. (S/R 1723)

A file equation equates offline to a remote device.

Change the file equation to an acceptable format.

STORE WAS UNABLE TO OBTAIN A TIMER ENTRY FOR THE 'PROGRESS' OPTION. CLOCKS ERROR: !. STORE WILL CONTINUE ANYWAY. (S/R 1729)

Store could not communicate with the system timer.

Abort and try again if you must have progress messages.

STORE ENCOUNTERED A SYSTEM SECURITY VIOLATION DURING INITIALIZATION. (S/R 1730)

Internal security violation.

Call your Hewlett-Packard Support Representative.

MEDIA RECORD SIZE SPECIFIED IS TO SMALL TO HOUSE STORE'S FILE INFORMATION IN ONE RECORD. MINIMUM SIZE IS !. (S/R 1731)

The file label etc is not fitting in one media record.

Set a larger media record size by a file equation.

STORE RAN OUT OF VIRTUAL SPACE CREATING THE MEDIA DIRECTORY OF FILES TO BE STORED. (S/R 1732)

Virtual space fragmentation caused store to run out of space.

Retry store when the system is less loaded.

STORE RAN OUT OF DISC SPACE CREATING THE MEDIA DIRECTORY OF FILES TO BE STORED. (S/R 1733)

Too little disk space on the system.

Create some free disk space.

STORE WAS UNABLE TO SET THE ACCESS DENSITY IN THE LDT. SHOWDEV MAY REPORT FALSE DENSITY INFORMATION. (S/R 1734)

Store could not communicate with the logical device table.

Call your Hewlett-Packard Support Representative.

WARNING: FILE 'SYSLIST' RECORD SIZE IS TOO SMALL TO DISPLAY MESSAGES. THE 'SYSLIST' FILE IS REDIRECTED TO $STDLIST. MINIMUM RECORD SIZE IS 80 BYTES. (S/R 1735)

The syslist record size is set too small.

Set a larger record size and retry.

WARNING: FILE 'OFFLINE' RECORD SIZE IS TOO SMALL TO DISPLAY MESSAGES. THE 'OFFLINE' FILE IS REDIRECTED TO $STDLIST. MINIMUM RECORD SIZE IS 80 BYTES. (S/R 1736)

The offline record size is set too small.

Set a larger record size and retry.

STORE ENCOUNTERED INTERNAL PREFETCH ZERO LENGTH ERROR (S/R 1737)

Internal error occurred during STORE operation.

Contact your HP Support Representative.

STORE WAS UNABLE TO ALLOCATE SPACE FOR 'COMPRESS' OPTION BUFFERS AND CONTROL BLOCKS: VSM ERROR ! (S/R 1738)

Store/Restore could not allocate the space needed to do compression.

Remove the COMPRESS option from the STORE command line, or wait until the system has more memory. If the problem persists, contact your HP representative.

TOTAL MEDIA WRITTEN :

This is the total number of media written for this STORE.

Information only. Compare to the actual physical media to make sure you have all the media from this backup.

MEDIA WRITTEN FOR SET ! :

This is the total number of media written for the specified parallel storeset.

Information only. Compare to the actual physical media to make sure you have all the media from this storeset.

SENDMAIL TO SYSGEN FROM STORE FAILED. (S/R 1741)

Internal error occurred during the creation of combined SLT/Store set.

Contact your HP Support Representative.

WARNING: STORE WILL OVERRIDE HPCMSTORE VARIABLE. (S/R 1742)

Although the HPCMSTORE CI variable is set to TRUE, SYSGEN will override it and call NMStore.

Information only.

REEL WITH BOTH SLT AND STORE FILES CAN NOT BE RECOVERED. (S/R 1743)

Unable to recover files from combined SLT/Store set due to internal error.

Contact your HP Support Representative.

STORE ENCOUNTERED ERROR WHILE RETRIEVING ANCESTOR INFORMATION. (S/R 1744)

Store encountered an error may be because the grandparent process who invoked the store is not either HPINSTAL or AUTOINST.

Verify the grandparent process is either HPINSTAL or AUTOINST.

STORE ENCOUNTERED DISC FILE TOO SMALL TO WRITE DIRECTORY ON FILE "!" (S/R 1766)

The disk file specified for a store-to-disk was not large enough to hold the directory information.

Specify a larger file for the backup, or let STORE create the disk file.

STORE NEEDS DISC FILE TO HAVE AT LEAST ! SECTORS TO FIT ALL DIRECTORY INFORMATION (S/R 1767)

The disk file specified for a store-to-disk was not large enough to hold the directory information. It should be at least as big as specified in the message.

Specify a larger file for the backup, or let STORE create the disk file.

! NOT RESTORED: MEDIA READ ERROR ON FILE.

A read error encountered on the media.

Use onerror=skip or a duplicate tape set.

! NOT RESTORED: FILE HAD DATA ON A MEDIA THAT WAS NOT MOUNTED (SKIPPED)

Operator forced a media skip.

Redo the restore command if this file is needed.

! NOT RESTORED: FILE COULD NOT BE FOUND BECAUSE OF DAMAGED MEDIA LABEL RECOVERY

This particular file can not be restored due to bad media label.

To ensure complete data retrieval use duplicate store set and contact your HP support representative.

! NOT RESTORED: MEDIA READ ERROR OR FILE COULD NOT BE FOUND BECAUSE OF DAMAGED MEDIA LABEL RECOVERY

This particular file could not be restored due to either media read error or bad media label.

To ensure complete data retrieval use duplicate store set and contact your HP support representative for further assistance.

! NOT RESTORED: FILE HAD DATA ON A MEDIA THAT WAS NOT MOUNTED (SKIPPED) OR FILE COULD NOT BE FOUND BECAUSE OF DAMAGED MEDIA LABEL RECOVERY

Unable to restore this file due to either bad file label or the file not found in the mounted media.

To ensure complete data retrieval use duplicate store set and contact your HP Support representative for further assistance.

! NOT RESTORED: MEDIA READ ERROR OR FILE HAD DATA ON A MEDIA THAT WAS NOT MOUNTED (SKIPPED)

Media read error encountered or a media was skipped.

Try onerror=skip or use a duplicate tape set and retry.

! NOT RESTORED: MEDIA READ ERROR OR FILE HAD DATA ON A MEDIA THAT WAS NOT MOUNTED (SKIPPED) OR FILE COULD NOT BE FOUND BECAUSE OF DAMAGED MEDIA LABEL RECOVERY

Same as message.

To ensure complete data retrieval use duplicate store set and contact your HP Support Representative.

! NOT RESTORED: OLD COPY EXISTS: KEEP SPECIFIED

A disk copy of the file exists.

Exclude keep option if you desire the file to be over written.

! COULD NOT BE GIVEN SPECIFIED VOLUME RESTRICTIONS

The file could not be restored to specified volume/volclass/volset.

Check group restrictions and disk space restrictions.

! COULD NOT BE RESTRICTED TO THE SYSTEM MASTER VOLUME

Some file data had to be placed on non system master.

Make more free space on system master and retry.

! NOT RESTORED: HPFOPEN RAW FAILED

File open with the file information on tape failed.

Call your support representative.

! NOT RESTORED: MEDIA RECORD HEADER BLOCK CORRUPTED/INVALID

The header block of a media record is bad.

Call your support representative.

! NOT RESTORED: STORE OF FILE FAILED DURING MEDIA CREATION

The file was not stored due to open failure.

None.

! NOT RESTORED: DISC ALLOCATION FAILURE

Too little free disk space.

Create more disk space and retry.

! NOT RESTORED: ENCOUNTERED PRIVILEGE VIOLATION PURGING OLD FILE

The negative file code on media does not match the one on disk.

First purge the disk copy and then retry.

! NOT RESTORED: ENCOUNTERED LOCKWORD VIOLATION PURGING OLD FILE

The lockword on nedia does not match the one on disk and the user typed an incorrect lockword when prompted.

First purge the disk copy and then retry or type the correct lockword as on disk when prompted.

! DOES NOT HAVE OLD FILE DATES. MECHANISM TO SET OLDDATE FAILED

The old file dates on media could not be set.

Call your support representative.

! NOT RESTORED: FAILED SAVE OF NEW FILE

RESTORE could not save the newly restored file.

Call your support representative.

! WAS ONLY PARTIALLY RECOVERED (RESTORED) DUE TO MEDIA READ ERRORS

The option ONERROR=FULL caused the file to be recovered partially.

Check file consistency and purge if partial recovery is not needed.

! NOT RESTORED: DISC FILE IN USE, CANNOT PURGE

Some user has the file open so it can not be restored.

Retry when no one is using the file.

! NOT RESTORED: NOT ALL OF THE DATA WAS WRITTEN AT STORE TIME

Disk read error was encountered at store time.

Use media with valid copy of the file.

! DID NOT HAVE ALL OF ITS DATA WRITTEN TO THE MEDIA AT STORE TIME

Disc read error was encountered at store time.

Use media with valid copy of the file.

! NOT RESTORED: CAN'T ACCESS (MAP IN) TARGET DIRECTORY A NODE IN THE PATH MAY HAVE EXTENTS ON UNMOUNTED VOLUMES.

All the volumes in the set are not mounted.

Mount all volumes.

! NOT RESTORED: UNKNOWN DIRECTORY ERROR ENCOUNTERED

STORE internal error.

Call your support representative.

! NOT RESTORED: USER VOLUME SET THAT GROUP/ACCOUNT ACCESS IS NOT MOUNTED.

The home volume set is not mounted.

Mount the volume set.

! NOT RESTORED: ACCOUNT DOES NOT EXIST ON USER VOLUME SET. (I.E. ACCOUNT ON THE SYSTEM VOLUMESET LACKS MIRROR ON USER VS)

Directory structure discrepency.

Call your support representative.

! NOT RESTORED: GROUP DOES NOT EXIST ON USER VOLUME SET. (I.E. GROUP ON THE SYSTEM VOLUMESET LACKS MIRROR ON USER VS)

Directory structure discrepency.

Call your support representative.

! NOT RESTORED: DATA WRITE FAILURE (DISC WRITE FAILED)

Attempt to move data from media to disk failed.

Call your support representative.

! ENCOUNTERED AS DATA LOSS DUE TO A MEDIA READ ERROR(S)

Media read error.

Retry with a duplicate media set.

! NOT RESTORED: FILE IS NOT IN SPECIFIED FILE CODE RANGE LIST

The file code is not within the FCRANGE option range.

Check the FCRANGE parameter and file code.

! NOT RESTORED: READ ACCESS REQUIRES (AM) CAPABILITY

User lacks AM capability required to read the file.

Ask the account/system manager to restore the file.

! NOT RESTORED: READ ACCESS REQUIRES (SM) CAPABILITY

User lacks SM capability required to read the file.

Ask the system manager to restore the file.

! NOT RESTORED: READ ACCESS REQUIRES (GL) CAPABILITY

User lacks GL capability required to read the file.

Ask the account/system manager to restore the file.

! NOT RESTORED: READ ACCESS REQUIRES USER TO BE A MEMBER OF THE GROUP WHERE THE FILE RESIDED.

User should be the group member to read the file.

Ask the account/system manager to restore the file.

! NOT RESTORED: READ ACCESS REQUIRES (AL) CAPABILITY

User lacks AL capability required to read the file.

Ask the account/system manager to restore the file.

! NOT RESTORED: READ ACCESS REQUIRES (PM) CAPABILITY

User lacks PM capability required to read the file.

Ask the system manager to restore the file.

! NOT RESTORED: READ ACCESS REQUIRES USER TO BE FILE'S CREATOR

Users other than the creator need am/sm to read the file.

Ask the account/system manager to restore the file.

! NOT RESTORED: READ ACCESS REQUIRES (CR) CAPABILITY

User lacks cr capability required to read the file.

Ask the account/system manager to restore the file.

! NOT RESTORED: READ ACCESS REQUIRES USER TO KNOW THE LOCKWORD

User must supply the lockword to read the file.

Supply lockword or ask the account/system manager to restore the file.

! NOT RESTORED: USER DOES NOT HAVE READ ACCESS

The operation requires that you have Read Access to the file.

Request your system manager to restore the file.

! NOT RESTORED: SPECIFIED GROUP DOES NOT EXIST. 'CREATE=GROUP' REQUIRED.

The file group does not exist in the directory.

Use create=group option.

! NOT RESTORED: CREATION OF GROUP DIRECTORY NODE FAILED.

STORE internal error.

Call your support representative.

! NOT RESTORED: SPECIFIED ACCOUNT DOES NOT EXIST. 'CREATE=ACCOUNT' REQUIRED.

The file account does not exist in the directory.

Use CREATE=account option.

! NOT RESTORED: CREATION OF ACCOUNT DIRECTORY NODE FAILED.

STORE internal error.

Call your support representative.

! NOT RESTORED: DIRECTORY ERROR ENCOUNTERED ACCESSING GROUP OR ACCOUNT NODE

STORE directory interface error.

Call your support representative.

! NOT RESTORED: GROUP OR ACCOUNT DIRECTORY NODE(S) COULD NOT BE ACCESSED. THEY MAY HAVE EXTENTS ON UNMOUNTED VOLUMES.

Some unmounted volumes in the parent volumest.

Mount all volumes and retry.

! NOT RESTORED: CREATOR DOES NOT EXIST IN SPECIFIED ACCOUNT. 'CREATE=CREATOR' REQUIRED.

The file creator does not exist in the directory.

Use CREATE=creator option.

! NOT RESTORED: CREATION OF USER DIRECTORY NODE FAILED FOR FILE CREATOR.

STORE internal error.

Call your support representative.

! NOT RESTORED: ACCOUNT WAS MADE INACCESSIBLE OR PURGED DURING CREATION OF FILE CREATOR.

STORE internal error.

Call your support representative.

! NOT RESTORED: USER OR ACCOUNT DIRECTORY NODE(S) COULD NOT BE ACCESSED. THEY MAY HAVE EXTENTS ON UNMOUNTED VOLUMES.

Some unmounted volumes in the parent volumest.

Mount all volumes and retry.

! NOT RESTORED: DIRECTORY ERROR ENCOUNTERED ACCESSING USER NODE.

STORE directory interface error.

Call your support representative.

! NOT RESTORED: SAVE ACCESS REQUIRES (AM) CAPABILITY

User lacks am capability required to save the file.

Ask the account/system manager to restore the file.

! NOT RESTORED: SAVE ACCESS REQUIRES (SM) CAPABILITY

User lacks SM capability required to save the file.

Ask the system manager to restore the file.

! NOT RESTORED: SAVE ACCESS REQUIRES (GL) CAPABILITY

User lacks GL capability required to save the file.

Ask the account/system manager to restore the file.

! NOT RESTORED: SAVE ACCESS REQUIRES USER TO BE A MEMBER OF THE GROUP WHERE THE FILE WILL RESIDE.

User must be a group member to save the file.

Ask the account/system manager to restore the file.

! NOT RESTORED: SAVE ACCESS REQUIRES (AL) CAPABILITY

User lacks AL capability required to save the file.

Ask the account/system manager to restore the file.

! NOT RESTORED: GROUP DOES NOT EXIST ON SYSTEM.

The file group does not exist.

Use create=group option.

! NOT RESTORED: ACCOUNT DOES NOT EXIST ON SYSTEM.

The file account does not exist.

Use create=account option.

! NOT RESTORED: FILE EOF IS GREATER THAN FILE LIMIT.

File system discrepency.

Call your support representative.

! NOT RESTORED : USER DOES NOT HAVE WRITE/PURGE ACCESS.

User lacks capabilities to purge old file.

Ask the owner of the file, or the system manager or operator to restore this file for you.

! NOT RESTORED: NOT ALL OF LOG DATA WAS WRITTEN AT STORE TIME

Due to an error writing out the log data for this file at Store time, Restore was not able to completely recover the file. Therefore, it was not restored at all.

Try restoring the file from a duplicate backup, if possible.

! DID NOT HAVE ALL OF ITS LOG DATA WRITTEN TO THE MEDIA AT STORE TIME

Due to an error writing out the log data for this file at Store time, Restore was not able to completely recover the file. Therefore, it was not restored at all.

Try restoring the file from a duplicate backup, if possible.

! FAILED TO RECOVER PORTIONS OF COMPRESSED DATA

The system failed to recover portions of compressed data for this file due to internal error.

Contact your HP Support representative for further assistance.

! NOT RESTORED: GROUP WAS MADE INACCESSIBLE OR PURGED DURING CREATION OF THE PATH.

Unable to resolve the path name for this particular file because the group is either purged or inaccessible.

Check the syntax and retype the command.

! NOT RESTORED: ACCOUNT WAS MADE INACCESSIBLE OR PURGED DURING CREATION OF THE PATH.

Unable to resolve the path name for this particular file because the account is either purged or inaccessible.

Check the syntax and retype the command.

! NOT RESTORED: ACCOUNT PART OF THE CREATOR NAME DOES NOT EXIST. OPTION 'CREATE=ACCOUNT' REQUIRED.

This particular file is not stored because the account does not exist in the system.

Make sure either the account where the file needs to be stored exists or specify create=account in your command.

! NOT RESTORED: LACK CREATE ACCESS IN DIRECTORY

This file is not stored because you do not have the proper capabilities.

To store any directory you require SM or OP capability.

! NOT RESTORED: LACK TRAVERSE ACCESS ON DIRECTORY

User does not have traverse access of a directory in the path of file to be restored.

Have operator restore file for user.

! NOT RESTORED: LACK SAVE ACCESS ON DIRECTORY

Attempted to insert an entry in a hierarchical directory without Create Directory Entry (CD) permission.

Have operation performed by user with SM or AM capabilities, or have directory owner or system manager ALTSEC the directory to allow this operation.

! NOT RESTORED: FILE WAS PURGED DURING STORE

The file specified was purged before the sync point when it was stored during a 7x24 True-Online backup.

Information only.

! NOT RESTORED: FAILED TO SET AI LAT BIT BECAUSE THE FILE IS BEING RESTORED BY ANOTHER PROCESS.

The file specified is being restored by another RESTORE.

Wait until the other restore is complete, then restore the file again.

! NOT RESTORED: FAILED TO SET AI LAT BIT DURING RESTORE. ENCOUNTE RED ERROR ! FROM LAT SUBSYSTEM.

RESTORE was unable to set the after image LAT bit for this file.

Contact your HP support representative with the error reported.

! NOT RESTORED: ACCOUNT NOT SPECIFIED FOR CREATOR NAME OF HFS FILE.

The account portion of the CREATE= option was not specified for an HFS file.

If you want to change the creator of an HFS file, the full username.accountname must be specified.

RESTORE IS UNABLE TO RELOAD DIRECTORY ACCOUNTING STRUCTURES. REQUESTED NUMBER OF VOLUMESET DIRECTORY ACCOUNTING STRUCTURES TO RELOAD EXCEEDS THE MAXIMUM NUMBER OF MOUNTABLE VOLUMESETS FOR THIS SYSTEM (S/R 1901)

The number of directory structures to be restored exceeds the maximum allowed on your system.

Restore only maximum allowed volume set structures.

WARNING: RESTORE ENCOUNTERED UNNECESSARY MEDIA SWITCH. CHECK YOUR SYSLIST AND SUMMARY TO VERIFY RESTORE (S/R 1902)

Unnecessary media switch after last file.

Discard redundent last media.

RESTORE CAN'T TRANSLATE VERSION OF FILE LABEL ON THIS SYSTEM. RUN WITH 'LISTDIR' OPTION AND OBTAIN STORE "MEDIA VERSION" (S/R 1903)

The store subsystem is incompatible with the file label on media.

Update store subsystem.

! VOLUME SET'S ACCOUNTING STRUCTURE COULD NOT BE REBUILT. (S/R 1904)

Directory services failure.

Call your Hewlett-Packard Support Representative.

! BYTES COULD NOT BE RESTORED FOR PRECEEDING FILE

Data loss for a file being restored.

Use duplicate mdia set and retry.

ADDRESS RANGE NOT STORED STARTS AT OFFSET ! FOR ! BYTES

Disk read error at store time.

Use a media set with valid copy of the file.

RESTORESET OPTION CANNOT BE USED TO READ MPEv TAPES (S/R 1907)

Option RESTORESET is used with MPE V tapes.

Exclude RESTORESET option and retry.

INVOKING CMSTORE TO READ MPE V TAPE

Store detected a compatibility mode tape and is calling CMSTORE to read it.

Information only.

MEDIA ON SPECIFIED STORESETS ARE NOT FROM THE SAME STORE. (S/R 1909)

The tapes mounted for parallel storeset option were not created by the same store command. If you used a sequential storeset option to create the set of tapes then there is a possibility that some of the tapes were never written and, hence, have a time stamp that does not match the rest of the tapes.

Check that you have a consistent set of store tapes and exclude restoreset, if redundent.

WARNING: YOUR DEFAULT FILESET BECOMES '@.@.@' SINCE YOU HAVE OP OR SM CAPABILITY. (S/R 1911)

File set specification was excluded.

Abort and use explicit file set if you do not want the default.

WARNING: YOUR DEFAULT FILESET BECOMES '@.@' SINCE YOU HAVE AM CAPABILITY. (S/R 1912)

File set specification was excluded.

Abort and use explicit file set if you do not want the default.

WARNING: YOUR DEFAULT FILESET BECOMES '@' SINCE YOU HAVE NONE OF OP, AM, OR SM CAPABILITY. (S/R 1913)

File set specification was excluded.

Abort and use explicit file set if you dont want the default.

RESTORE FAILED

RESTORE encountered fatal error.

Check the error message beore this one.

RESTORE FAILED TO CREATE TRANSIENT DATA SPACE TO DUMP MEDIA DIRECTORY: VSM ERROR !. (S/R 1938)

Restore could not get virtual space for its structures.

Call your Hewlett-Packard Support Representative.

RESTORE FAILED TO RELEASE TRANSIENT DATA SPACE FOR MEDIA DIRECTORY: VSM ERROR !. (S/R 1939)

Restore failed to release its work space.

Call your Hewlett-Packard Support Representative.

RESTORE FAILED TO CREATE TRANSIENT DATA SPACE FOR CANDIDATE FILE: VSM ERROR !. (S/R 1940)

Restore failed to allocate space for a candidate file.

Call your Hewlett-Packard Support Representative.

MEDIA CONTAINS NO MPE VOLUME SET DIRECTORIES, 'DIRECTORY' OPTION CAN NOT RELOAD SYSTEM DIRECTORY

DIRECTORY option specified but no directories on tape.

Check the media set.

RESTORE IS ASSUMING CURRENT MEDIA IS MEDIA ! FROM SET !

Reel and set number are unknown due to media label error.

Use a duplicate tape set with good labels.

RESTORE IS ASSUMING CURRENT MEDIA IS MEDIA !

Reel number is unknown due to media label error.

Use a duplicate tape set with good labels.

RESTORE ENCOUNTERED ERROR GETTING PROCESS LOCAL FILE DESCRIPTOR ADDRESS (PLFD). ERROR: !. (S/R 1944)

RESTORE internal error.

Call your Hewlett-Packard Support Representative.

RESTORE ENCOUNTERED ERROR ALLOCATING SECONDARY STORAGE: SSM ERROR: !. (S/R 1945)

RESTORE internal error.

Call your Hewlett-Packard Support Representative.

AREA OF DATA LOSS LIES BETWEEN BYTE OFFSET ! AND BYTE OFFSET !

Media read error caused some data loss.

Use duplicate tape set with good media.

MPE DIRECTORIES FAILED TO RESTORE :

Some directories not restored.

Check previous error message about directory not restored.

FILES FAILED TO RESTORE :

Some files were not restored.

Check the restore listing to see which files did not restore, and any error messages associated with those files.

FILES NOT ON MEDIA :

Some files found no match on tape.

Use the tape set which has these files.

RESTORE WAS UNABLE TO CREATE USER "!" IN ACCOUNT "!". CIERROR !. (S/R 1957)

Newuser command issued by store failed.

Call your Hewlett-Packard Support Representative.

RESTORE WAS UNABLE TO CREATE ACCOUNT "!". CIERROR !. (S/R 1958)

Newaccount command issued by store failed.

Call your Hewlett-Packard Support Representative.

RESTORE WAS UNABLE TO CREATE GROUP "!" IN ACCOUNT "!".CIERROR !. (S/R 1959)

Newgroup command issued by store failed.

Call your Hewlett-Packard Support Representative.

RESTORE CREATED ACCOUNT "!"

As part of the CREATE option, restore created the specified account. This account has default capabilities.

Information only.

RESTORE CREATED GROUP "!" IN ACCOUNT "!"

As part of the CREATE option, restore created the specified group. This group has default capabilities.

Information only.

RESTORE CREATED USER "!" IN ACCOUNT "!"

As part of the CREATE option, restore created the specified user. This user has default capabilities.

Information only.

RESTORE CREATED ACCOUNT "!" ON VOLUMESET "!"

As part of the CREATE option, restore created the specified account on the specified volume set. This account has default capabilities.

Information only.

RESTORE WAS UNABLE TO CREATE ACCOUNT "!". ON VOLUMESET "!" CIERROR ! (S/R 1964)

Restore failed to create an account on user volset for create option.

Call your Hewlett-Packard Support Representative.

RESTORE CREATED GROUP "!" IN ACCOUNT "!" ON VOLUMESET "!"

As part of the CREATE option, restore created the specified group on the specified volume set. This account has default capabilities.

Information only.

RESTORE WAS UNABLE TO CREATE GROUP "!" IN ACCOUNT "!". ON VOLUMESET "!". CIERROR !. (S/R 1966)

Restore failed to create a group on user volset for create option.

Call your Hewlett-Packard Support Representative.

RESTORE CREATED GROUP "!" MIRROR IN ACCOUNT "!" FOR VOLUMESET "!"

As part of the CREATE option, restore created the specified group on the specified mirrored volume set. This account has default capabilities.

Information only.

RESTORE WAS UNABLE TO CREATE GROUP "!" IN ACCOUNT "!" MIRROR FOR VOLUMESET "!". CIERROR !. (S/R 1968)

Restore failed to create a group mirror on user volset for create option.

Call your Hewlett-Packard Support Representative.

WARNING: RESTORE WAS UNABLE TO CREATE GROUP "!" IN ACCOUNT "!" MIRROR FOR VOLUMESET "!". CIERROR !. (S/R 1969)

Restore failed to create a group mirror on user volset for create option.

Call your Hewlett-Packard Support Representative.

RESTORE CREATED ACCOUNT "!" MIRROR FOR VOLUMESET "!".

As part of the CREATE option, restore created the specified accout on the specified mirrored volume set. This account has default capabilities.

Information only.

RESTORE WAS UNABLE TO CREATE ACCOUNT "!" MIRROR FOR VOLUMESET "!". CIERROR !. (S/R 1971)

Restore failed to create a account mirror on user volset for create option.

Call your Hewlett-Packard Support Representative.

STORE MEDIA CREATED ON ! IS ON LDEV !

Store tape time stamp mismatch with STORESET option.

Option check the tape set creation times, exclude STORESET.

RESTORE WAS UNABLE TO CREATE ACCOUNT "HPSPOOL". (S/R 1974)

The HPSPOOL account does not exist on the system volume set.

Have system manager review the circumstances of the disappearance of the HPSPOOL account, then do a system reboot, which will recreate HPSPOOL.

RESTORE WAS UNABLE TO CREATE GROUP "OUT" IN ACCOUNT "HPSPOOL". (S/R 1975)

The OUT.HPSPOOL group does not exist on the system volume set.

Have system manager review the circumstances of the disappearance of the OUT.HPSPOOL group, then do a system reboot, which will recreate HPSPOOL.

VSTORE OPTION CANNOT BE USED TO READ MPEv MEDIA (S/R 1977)

A MPE/V format tape was mounted for a VSTORE operation.

Only Native Mode Store tapes can be verified by VSTORE.

ERROR SKIPPING PAST THE SLT (S/R 1985)

RESTORE encountered an error while trying to skip past the SLT portion of a combined SLT/Store tape.

Check the tape drive and reissue the command. If the problem persists, contact your HP representative.

NO FILES STORED AFTER THE SLT (S/R 1986)

This SLT is not a combined SLT/Store Tape.

This tape can only be used as a system load tape.

RESTORE ENCOUNTERED AN ERROR ON SLT REEL SWITCH (S/R 1987)

A tape error occurred while RESTORE was switching to the next reel of a combind SLT/Store set tape.

Check the tape drive and reissue the command. If the problem persists, contact your HP representative.

RESTORE GOT A WARNING CREATING USER "!" IN ACCOUNT "!". CIWARN ! (S/R 2009)

While creating a the specified new user, RESTORE got a warning.

Information only, the user was still created. Look up the CI warning for more detail.

RESTORE WAS UNABLE TO ALLOCATE SPACE TO EXPAND THE MEDIA DIRECTORY AREA: VSM ERROR !(S/R 2014)

RESTORE could not allocate enough scratch space to expand an older version of store media.

Make sure you have enough transient space on your system.

RESTORE IS ABORTING BECAUSE IT IS UNABLE TO READ A VALID MEDIA DIRECTORY (S/R 2015)

RESTORE was unable to read a valid media directory from the backup media.

If you have additional media in the backup, try mounting them first.

RESTORE FAILED TO ALLOCATE SPACE FOR ITS MEDIA DIRECTORY EXTENSION: VSM ERROR ! (S/R 2016)

RESTORE was unable to allocate enough temporary space to hold its media directory extension information.

Make sure you have enough transient space available on your system.

RESTORE FAILED TO ALLOCATE SPACE FOR ITS RESTORED UFIDS ARRAY: VSM ERROR ! (S/R 2018)

RESTORE was unable to allocate enough temporary space to hold its internal UFID array.

Make sure there is enough transient space on your system.

! NOT RESTORED: FILE WAS MISSED ON MEDIA DUE TO PREVIOUS RESTORE ERROR

Due to media errors, RESTORE was unable to restore one or more files on the backup.

Try to individually restore these files.

! NOT RESTORED: FILE WAS MISSED ON INTERLEAVED MEDIA DUE TO PREVIOUS RESTORE ERROR

Due to media errors, RESTORE was unable to restore one or more files on the interleaved backup.

Try to individually restore these files.

! NOT RESTORED: AI LOG DATA FOR FILE WAS MISSED ON MEDIA DUE TO RESTORE ERROR

Due to a previous media error, RESTORE is unable to locate the required after image data for the specified file.

Try to individually restore this file.

! NOT RESTORED: FILE IS SUSPECTED OF MISSING DATA DUE TO EARLIER RESTORE MEDIA ERROR.

This file never had all of its data restored, probably due to an earlier media error.

Try to individually restore this file.

! NOT RESTORED: RESTORE FORCED TO TERMINATE WHILE RESTORING FILE

The file is not restored because RESTORE was in the middle of restoring it when RESTORE was forced to abort due to either an error or user intervention.

Try to restore this file again.

! NOT RESTORED: RESTORE FORCED TO TERMINATE BEFORE FILE WAS RESTORED

This file was not restored because RESTORE aborted, due to an error or user intervention, before the file was encountered on the media.

! NOT RESTORED: RESTORE DETECTED WRONG DATA RECORD BLOCK NUMBER

The file was not restored because some of the blocks of file data were missing or out of order.

Contact your HP Support Representative.

! NOT RESTORED: RESTORE DETECTED WRONG LOG RECORD BLOCK NUMBER

The file was not restored because some of the shadow log records are in wrong sequence.

Contact your HP Support Representative.

! NOT RESTORED: FILE WAS STILL BEING RESTORED WHEN FINAL TRAILER WAS ENCOUNTERED

The file was not restored because the final trailer was encountered while only partial file was restored.

Contact your HP Support Representative.

! NOT RESTORED: FILE WAS NOT FOUND WHEN FINAL TRAILER WAS ENCOUNTERED

The file was not restored because the final trailer was encountered before finding the file.

Verify you specified the file name correctly. If the problem still persists contact your HP Support Representative.

RESTORE FAILED TO ALLOCATE DATA STRUCTURES NEEDED TO APPLY AFTER IMAGE LOG DATA (S/R 2029)

Restore failed because it is unable to allocated internal data structure required to restore the files.

Contact your HP Support Representative.

! NOT RESTORED: MISSING OLD UFID PREVENTED LOG DATA FROM BEING APPLIED

The file is not restored because internal problem encountered while applying the shadow log data.

Contact your HP Support Representative.

! NOT RESTORED: UNEXPECTED STORAGE MANAGEMENT ERROR ! WHILE OPENING OLD FILE

The file is not restored because of an internal error from the Disc Storage Manager.

Contact your HP Support Representative.

! NOT RESTORED: AFTER IMAGE DATA NOT APPLIED

The file is not restored because an internal error occurred while applying the shadow log data.

Contact your HP Support Representative.

! NOT RESTORED: UNEXPECTED STORAGE MANAGEMENT ERROR ! WHILE MAPPING IN OLD FILE

The file is not restored because of an internal error from Disc Storage Manager.

Contact your HP Support Representative.

! NOT RESTORED: UNEXPECTED VSM ERROR ! WHILE ADJUSTING EOF AND FILE LIMIT OF OLD FILE

The file is not restored because of an internal error from Virtual Storage Manager.

Contact your HP Support Representative.

! NOT RESTORED: UNEXPECTED ERROR ENCOUNTERED WHEN UPDATING FILE LABEL EXTENSION OF OLD FILE

The file is not restored because of an unexpected internal error while updating the file label extension.

Contact your HP Support Representative.

RESTORE GOT UNEXPECTED ERROR ! FROM SUBSYS ! WHEN UPDATING FILE LABEL EXTENSION DATA

Restore failed because of an unexpected error from Label Management subsystem.

Contact your HP Support Representative.

SPECIFIED DATABASE(S) COULD NOT BE RESTORED. (S/R 2101)

Database not restored.

Check previous error messages.

! NOT RESTORED: DATABASE EXISTS: KEEP SPECIFIED

The specified database already exists on the system, so RESTORE can not overwrite it, due to the KEEP option being specified.

If you really want to overwrite the existing database, redo the RESTORE command, specifiying the NOKEEP option instead.

DBSTORE REQUIRES THAT BOTH THE 'HIGH' AND 'LOW' WATER MARK BE SPECIFIED. (S/R 2110)

Only one of high or low option was specified.

Specify both high and low options.

DBSTORE COULDN'T FIND THE CORRECT NUMBER DATA SETS (COUNTING THE ROOT FILE). ! WERE SPECIFIED AND ! WERE FOUND. (S/R 2111)

There were some extra or missing datasets.

Check database consistency.

SENDMAIL TO DBSTORE/DBRESTOR FROM STORE/RESTORE FAILED. (S/R 2120)

Send mail utility failure.

Call your Hewlett-Packard Support Representative.

STORE/RESTORE ENCOUNTERED USER ABORTED IO ON LDEV !. (S/R 2128)

Break/abort or ABORTIO command killed store IO.

Redo store if you need to.

STORE/RESTORE ENCOUNTERED USER ABORTED IO. (S/R 2129)

Break/abort or ABORTIO command killed store IO.

Redo store if you need to.

STORE/RESTORE ENCOUNTERED EXCESSIVE REWIND RETRIES ON LDEV !. EXAMINE CABLE CONNECTIONS OR BUS ADDRESS. (S/R 2132)

Dirty tape heads or bad quality media.

Clean tape heads and use new tapes.

STORE/RESTORE ENCOUNTERED EXCESSIVE REWIND RETRIES ON REMOTE DEVICE FILE "!". (S/R 2133)

Dirty tape heads or bad quality media.

Clean tape heads and use new tapes.

STORE/RESTORE ENCOUNTERED EXCESSIVE REWIND RETRIES ON FILE "!". (S/R 2134)

Dirty tape heads or bad quality media.

Clean tape heads and use new tapes.

STORE/RESTORE ENCOUNTERED CATASTROPHIC IO ERROR FROM SUBSYS !: ERROR. ! (S/R 2136)

Fatal IO error from specified subsystem.

Call your Hewlett-Packard Support Representative.

STORE/RESTORE UNEXPECTEDLY RAN OUT OF FIXED IO BUFFER SPACE (S/R2137)

STORE or RESTORE encountered an unexpected error in its I/O system.

Contact your HP Support Representative.

STORE/RESTORE UNEXPECTEDLY RAN OUT OF IO BUFFER SPACE (S/R 2138)

STORE or RESTORE encountered an unexpected error in its I/O system.

Contact your HP Support Representative.

STORE/RESTORE ENCOUNTERED FAILURE RELEASING FILE LOCKING MECHANISM (LAT). (S/R 2202)

Store could not release global file locking table.

Call your Hewlett-Packard Support Representative.

STORE/RESTORE ENCOUNTERED FAILURE ACTIVATING FILE LOCKING MECHANISM (LAT). (S/R 2203)

Store could not activate global file locking table.

Call your Hewlett-Packard Support Representative.

STORE/RESTORE ENCOUNTERED ERROR READING STORE IPC MESSAGE: IPC ERROR !. (S/R 2204)

System utility failure.

Call your Hewlett-Packard Support Representative.

STORE/RESTORE ENCOUNTERED ERROR SENDING STORE IPC MESSAGE: IPC ERROR !. (S/R 2205)

System utility failure.

Call your Hewlett-Packard Support Representative.

STORE/RESTORE FAILED TO CREATE ITS IPC PORT: IPC ERROR !. (S/R 2206)

System utility failure.

Call your Hewlett-Packard Support Representative.

STORE/RESTORE FAILED TO CREATE ITS TRANSIENT DATA SPACE: VSM ERROR !. (S/R 2207)

Store could not create its work space.

Call your Hewlett-Packard Support Representative.

STORE FAILED TO CREATE ITS SURROGATE PROCESS: PROCESS MANAGEMENT ERROR !. (S/R 2208)

System utility failure.

Call your Hewlett-Packard Support Representative.

STORE/RESTORE OPERATION ABORTED BY USER REQUEST. (S/R 2209)

User aborted store operation.

None.

STORE/RESTORE ENCOUNTERED FOPEN FAILURE ON DEVICE FILE "!". (S/R 2213)

Store aborted or device unavailable.

Set a file equation for a correct store device.

DEVICE FILE "!" REFERENCES STORAGE MEDIA THAT CANNOT BE USED BYSTORE/RESTORE. ONLY 1/2 INCH TAPE ACCESS IS SUPPORTED IN NATIVE MODE. (S/R 2215)

Unsupported device file used.

Set a file equation for a correct store device.

DEVICE FILE "!" REFERENCES LABELED TAPE MEDIA. LABELED TAPE ACCESS IS NOT ALLOWED WITH A '(RE)STORESET'. (S/R 2216)

NMstore found a labelled tape or device file equation.

Use unlabelled tapes and file equations.

DEVICE FILE "!" HAS A DENSITY THAT IS DIFFERENT FROM THE DENSITY SPECIFIED FOR THE FIRST DEVICE OF THE '(RE)STORESET'. ALL TAPE DEVICE FILES MUST HAVE THE SAME DENSITY. (S/R 2217)

The tape density are not identical accross store/restore devices.

Use consistent device density for all drives.

DEVICE FILE "!" REFERENCES STORAGE MEDIA THAT USES A DIFFERENT ACCESS METHOD THAN FIRST DEVICE OF THE '(RE)STORESET'. ALL DEVICE FILES IN A SET MUST USE THE SAME ACCESS METHOD. (S/R 2218)

The access methods are not identical accross store/restore devices.

Use consistent access methods for all drives.

DEVICE FILE "!" REFERENCES STORAGE MEDIA THAT HAS A RECORD SIZE DIFFERENT THAN FIRST DEVICE OF THE '(RE)STORESET'. ALL DEVICE FILES IN A SET MUST USE THE SAME RECORD SIZE. (S/R 2219)

The record sizes are not identical accross store/restore devices.

Use consistent record size for all drives.

DEVICE FILE "!" REFERENCES STORAGE MEDIA WITH A FORMAT DIFFERENT THAN FIRST DEVICE OF THE '(RE)STORESET'. ALL DEVICE FILES IN A SET MUST USE THE SAME FORMAT (EITHER LABELED OR UNLABELED). (S/R 2220)

The media format are not identical accross store/restore devices.

Use consistent media format for all drives.

TAPE DENSITY OF DEVICES IN (RE)STORESET ! DOES NOT MATCH THE DENSITY OF THE DEVICES IN (RE)STORESET !. ALL DENSITIES MUST MATCH. (S/R 2221)

The tape density are not identical accross store/restore devices.

Use consistent device density for all drives.

MEDIA RECORD SIZE OF DEVICE FILES IN (RE)STORESET ! DOES NOT MATCH THE MEDIA RECORD SIZE OF THE DEVICE FILES IN (RE)STORESET !. ALL MEDIA RECORD SIZES MUST BE THE SAME. (S/R 2222)

The record sizes are not identical accross store/restore devices.

Use consistent record size for all drives.

MEDIA FORMAT OF DEVICE FILES IN (RE)STORESET ! DOES NOT MATCH THE MEDIA FORMAT OF THE DEVICE FILES IN (RE)STORESET !. ALL MEDIA MUST BE CREATED IN EITHER LABELED OR UNLABELED FORMAT. (S/R 2223)

The media format are not identical accross store/restore devices.

Use consistent media format for all drives.

DEVICE FILE "!" HAS A INVALID RECORD SIZE OF ! BYTES (MINIMUM SIZE IS 8192 BYTES MAX IS 16384 IN MULTIPLES OF 2048 BYTES). (S/R 2224)

The media record size has invalid length.

Set tape file equation to set acceptable size.

DEVICE FILE "!" HAS A INVALID RECORD SIZE OF ! BYTES (MINIMUM SIZE IS 8192 BYTES, MAX IS 16384 IN MULTIPLES OF 2048 BYTES). DEFAULT OF 16384 BYTES WILL BE USED. (S/R 2225)

The media record size has invalid length.

Set tape file equation to set acceptable size.

VOLUME MANAGEMENT MAXIMUM MOUNTED VOLUME SET COUNT WAS EXCEEDED FOR STORE/RESTORE INTERNAL VOLUME SET LIST STRUCTURES. STORE WAS EITHER PORTED TO AN INCONSISTENT OS OR RESTORE OF VOLUMESETS WAS DONE WITHOUT CORRECT 'FROMVS' VOLUME SETS SPECIFIED. (S/R 2226)

Store internal error.

Call your Hewlett-Packard Support Representative.

STORE/RESTORE ENCOUNTERED FOPEN FAILURE ON 'SYSLIST' FILE. (S/R 2227)

Syslist file could not be opened by main process.

Set a valid file equation for syslist.

THE SYSLIST FILE IS OPENED OLD PERMANENT WITH DEFAULT OF STDLIST. (S/R 2228)

Syslist open failure, defaulted to stdlist.

Set a valid file equation for syslist and retry.

STORE/RESTORE ENCOUNTERED ERROR CLOSING 'SYSLIST' FILE. (S/R 2229)

Store could not close syslist file.

Check the syslist file equation and retry.

STORE/RESTORE ENCOUNTERED FOPEN FAILURE ON 'OFFLINE' FILE. (S/R 2230)

Offline file could not be opened by main process.

Set a valid file equation for offline.

STORE/RESTORE TERMINATING BECAUSE OF BAD OFFLINE. (S/R 2231)

Offline file could not be opened by store.

Set a valid file equation for offline and retry.

STORE/RESTORE ENCOUNTERED ERROR CLOSING THE 'OFFLINE' FILE. (S/R 2232)

Offline file could not be closed by store.

Set a valid file equation for offline and retry.

STORE/RESTORE ABORTED AS PER USER REQUEST. (S/R 2234)

Break-abort or ABORTIO.

None.

STORE/RESTORE ENCOUNTED ERROR ATTEMPTING TO CREATE THE CMSTORE PROCESS TO READ A MPE V TAPE. (S/R 2235)

System utility failure.

Call your Hewlett-Packard Support Representative.

SPECIFIED COMMAND STRING EXCEEDS THE MAXIMUM ALLOWABLE LENGTH (255 BYTES) THAT THE CMSTORE PROCESS MAY BE INVOKED WITH. (S/R 2236)

Command string is too long.

Use indirect file.

MAX MEDIA BUFFER SIZE IS USED. CURRENT MEDIA RECORD SIZE IS: !.

MAXTAPEBUF option is specified

None.

! NOT RESTORED: UNKNOWN ERROR ENCOUNTERED. (S/R 2243)

A file could not be restored due to unknown error.

Call your Hewlett-Packard Support Representative.

STORE/RESTORE ABORTED DUE TO UNKNOWN ERROR. (S/R 2244)

Unknown fatal error during store/restore.

Call your Hewlett-Packard Support Representative.

A TRAP OCCURED WHILE GENERATING THE STORE/RESTORE FILE LISTING. (S/R 2245)

A trap occured while generating show listing.

Call your Hewlett-Packard Support Representative.

A TRAP OCCURED WHILE ACCESSING THE FILE LISTING OBJECT (S/R 2246)

A trap occured while accessing file list object.

Call your Hewlett-Packard Support Representative.

STORESET CONTAINS DUPLICATE REFERENCES TO A SINGLE LDEV. (S/R 2247)

Same device used more than once in the store command.

Retry without using duplicate references to a single ldev.

THE DEVICE FILE "!" IS OF UNSUITABLE TYPE FOR THIS STORE ALL OR NONE OF THE DEVICES SHOULD BE DDS FOR A SINGLE COMMAND (S/R 2252)

Both 1/2 inch and DDS devices were specified for a store command.

Make sure all file equations reference the same type of devices and reissue the store command.

COULD NOT TURN ON SSM STATUS REPORTING FOR DEVICE "!" (S/R 2253)

An error occurred for the specified DDS device.

Check the device and reissue the command. If the problem persists, contact your HP representative.

COULD NOT TURN OFF SSM STATUS REPORTING FOR DEVICE "!" (S/R 2254)

An error occurred for the specified DDS device.

Check the device and reissue the command. If the problem persists, contact your HP representative.

TAPE DEVICE IN (RE)STORESET ! DOES NOT MATCH THE DEVICE IN (RE)STORESET !. EITHER ALL OR NONE OF THE DEVICES SHOULD BE DDS UNITS (S/R 2255)

Both 1/2 inch and DDS devices were specified for a store command.

Make sure all file equations reference the same type of devices and reissue the store command.

SET INFORMATION AREA OF DIRECTORY EXTENSION MISSING

No parallel store set information was written to this tape.

Contact your HP representative.

THE MEDIA ON LDEV ! WAS CREATED WITH DEVICE HARDWARE COMPRESSION. THIS MEDIA CAN NOT BE RESTORED WITH THE CURRENT DRIVE. IF THE DEVICE IS AN 7980XC THEN TURN ON THE DEVICE COMPRESSION FEATURE AND RETRY. (S/R 2263)

You are trying to restore from a hardware compressed tape with a non-compression drive.

If possible, enable compression on your drive. Alternately, restore this tape with a device capable of reading a hardware-compressed tape.

OPEN ERROR WHILE REMAPPING THE BACKUP FILE ON LDEV ! (S/R 2265)

STORE encountered an error while closing the specified magneto-optical device.

Contact your HP representative.

MAPIN ERROR WHILE REMAPPING THE BACKUP FILE ON LDEV ! (S/R 2266)

STORE encountered an error while closing the specified magneto-optical device.

Contact your HP representative.

CLOSE ERROR WHILE REMAPPING THE BACKUP FILE ON LDEV ! (S/R 2267)

STORE encountered an error while closing the specified magneto-optical device.

Contact your HP representative.

THE VOLUME SET NAME ! MOUNTED ON LDEV ! IS GREATER THAN 8 CHARACTERS. ONLY FIRST 8 CHARACTERS WILL BE USED TO CONSTRUCT THE BACKUP FILE NAME (S/R 2268)

Store/Restore will only use the first 8 characters of the specified name for the magneto-optical backup file name.

If this behavior does not produce an acceptable backup name, abort store, correct the volume set name, and retype the command.

STORE FAILED TO CREATE ITS CHILD PROCESS !: PROCESS MANAGEMENT ERROR ! (S/R 2271)

Store/Restore encountered an internal error.

Contact your HP representative for further assistance.

CHILD PROCESS ID ! HAS UNEXPECTEDLY TERMINATED (S/R 2272)

Store/Restore encountered an internal error.

Contact your HP representative for further assistance.

STORE/RESTORE ENCOUNTERED INTERNAL ERROR ! FROM PROCEDURE "!" AT LINE ! OF PROCEDURE "!" (S/R 2280)

STORE failed because of an unexpected internal error.

Contact your HP Support Representative and give the procedure number and the line number where the error occurred.

STORE/RESTORE ENCOUNTERED UNEXPECTED ERROR ! FROM SUBSYS ! AT LINE ! OF PROCEDURE "!" (S/R 2281)

STORE failed because of an unexpected internal error.

Contact your HP Support Representative and give the procedure number and the line number where the error occurred.

WARNING: STORE ENCOUNTERED HPFOPEN ERROR ! WHILE CREATING DIRECTORY DISC FILE. (S/R 2282)

STORE encountered an open error while creating media directory disc file.

Information only because restore will use the media directory from the tape.

THE SPECIFIED STORE DIRECTORY ("!") DOES NOT MATCH THE MOUNTED BACKUP. (S/R 2283)

The disc media directory specified in the command line does not match the name of the directory on the tape.

Verify the store directory name specified on your command line and also make sure you have mounted the correct tape.

CREATED STORE DIRECTORY DISK FILE: "!"

Due to either the ONLINE=END or STOREDIRECTORY options, STORE created a disk file with the specified name. This disk file contains the store directory information for the backup just created.

Information only.

CREATED LINK "!" TO STORE DIRECTORY DISK FILE

Due to the STOREDIRECTORY=name option, STORE created a symbolic link to the store disk directory file.

Information only.

STORE DIRECTORY DISK FILE OCCUPIES ! SECTORS

This is the size, in sectors, of the newly created store disk directory file.

Information only.

STORE ENCOUNTERED UNEXPECTED ERROR ! FROM SUBSYS ! WHILE WAITING FOR SYNC POINT (S/R 2288)

STORE aborted because it encountered an unexpected error while trying to sync all the files at sync point.

Contact your HP Support Representative.

WARNING: STORE ENCOUNTERED UNEXPECTED TRAP ! FROM SUBSYS ! WHITE COPYING DATA FOR DIRECTORY DISC FILE. (S/R 2289)

STORE encountered an error while creating disc media directory file.

Information only.

STORE DISC DIRECTORY FILE WILL NOT BE CREATED, BUT BACKUP IS STILL GOOD. (S/R 2290)

STORE was unable to create a disc media directory file, but the STORE will continue and complete normally.

Information only and no action required.

WARNING: STORE ENCOUNTERED FILE SYSTEM ERROR WHILE PREPARING THE DISC DIRECTORY FILE EOF (S/R 2291)

STORE encountered an unexpected error while preparing the disc media directory file.

Information only and no action required because STORE will complete storing all the files.

WARNING: STORE ENCOUNTERED FILE SYSTEM ERROR WHILE SETTING THE DISC DIRECTORY FILE EOF (S/R 2292)

STORE encountered an error while writing the end of file marker in the disc media directory file.

Information only and no active required because STORE will complete storing all the files.

WARNING: STORE ENCOUNTERED FILE SYSTEM ERROR WHILE CLOSING THE DISC DIRECTORY FILE (S/R 2293)

STORE is unable to close the disc media directory file.

Information only and no action required because STORE will store all the files.

WARNING: STORE ENCOUNTERED FILE SYSTEM ERROR WHILE CREATING SYMBOLIC LINK ! TO DISC DIRECTORY FILE !. THE SYMBOLIC LINK WILL NOT BE CREATED, BUT THE BACKUP IS STILL GOOD AND THE ORIGINAL DISC DIRECTORY FILE STILL EXISTS. (S/R 2294)

STORE failed to create a symbolic link to the store directory file specified in your command line.

Information only and no action required. Check the name specified in your command line.

WARNING: RESTORE ENCOUNTERED UNEXPECTED TRAP ! FROM SUBSYS ! WHILE READING THE DISC DIRECTORY FILE. DISC DIRECTORY FILE WILL NOT BE USED (S/R 2295)

RESTORE is unable to read the disc media directory file.

Information only. RESTORE will complete normally because it will use the media directory from the tape.

USER REQUESTED TERMINATION DURING ONLINE SYNC POINT (S/R 2296)

When asked if you wanted to abort the online backup before the sync point, you replied yes.

The backup will abort and will not be a valid backup.

SERIAL (RE)STORESETS CANNOT BE USED WITH DISC BACKUP FILE "!" (S/R 2297)

Serial (re)storesets cannot be used when storing to disk files.

Use a single disk file or parallel disk files for your backup.

DEVICE FILE "!" IS AN UNSUPPORTED FILE TYPE. ONLY STANDARD FILES CAN BE USED FOR DISC BACKUP(S/R 2298)

Only standard, fixed or undefined record files may be used for store-to-disk.

Specify a standard file for the store-to-disk.

PATH NAME OF DISC DEVICE "!" IS TOO LONG (S/R 2299)

A filename for a store-to-disk file was too long.

Specify a short filename for the store-to-disk file.

STORE/RESTORE WAS UNABLE TO OPEN PERMANENT DISC FILE REFERENCED BY DEVICE "!" (S/R 2300)

STORE is unable to open the necessary disc file for disc backup.

Check the free space in the disc device and try the STORE command again.

STORE/RESTORE WAS UNABLE TO OPEN NEXT PERMANENT DISC FILE "!" (S/R 2301)

STORE or RESTORE needed to store or restore files to another disc file, but was unable to open the specified file.

Make sure the existing file exists and that you have security access to the file.

RESTORE CANNOT RESTORE FILES FROM PARALLEL SET ! BECAUSE REQUIRED DISC FILE WAS NOT SUPPLIED IN RESTORESET OPTION (S/R 2302)

RESTORE cannot restore files from fewer parallel disk files than were created during the backup.

Specify all parallel disk files created during the backup with the ;RESTORESET option.

REMOTE FILE "!" IS NOT SUPPORTED FOR DISC BACKUP (S/R 2303)

You cannot specify a remote disc device or a remote file for disc backup.

Check your file equation and try the STORE command again.

A MEDIA IS CURRENTLY MOUNTED ON THE MO LDEV ! (S/R 2321)

The magneto-optical drive Store/Restore wanted to use is already occupied.

Removed the media from the specified ldev and retype the command.

ALLOCATE SERVICE OF MEDIA MANAGER ENCOUNTERED ERROR (S/R 2332)

Store/Restore could not allocate a magneto-optical device.

Check the magneto-optical hardware and reissue the command. If the problem persists, contact your HP representative.

MOUNT BY NAME REQUEST GOT A REPLY WITH UNWANTED MEDIA NAME STORE REQUESTED MEDIA NAME: ! MEDIA MANAGER MOUNTED NAME: ! THE MEDIA MANAGER MOUNTED INCORRECT MEDIA ON LDEV ! (S/R 2352)

The incorrect media is mounted for Store/Restore.

Check the mounted media and/or the Store command and make sure they match each other. Retype the command.

THE BACKUP NAME SPECIFIED ALREADY EXISTS IN THE MO BOX CONTAINING LDEV !. PLEASE RETRY THE BACKUP COMMAND WITH A NEW NAME. IF YOU OMIT THE NAME OPTION THEN BACKUP WILL GENERATE A UNIQUE NAME FOR YOUR OPERATION IN BKtime.Ddate.system_name FORMAT. (S/R 2370)

The name specified for a backup already exists in the magneto-optical device.

Either specific a non-existant name, or let Store assign one for you.

STORE/RESTORE GOT UNEXPECTED ERROR ! FROM SUBSYS ! WHILE ATTEMPTING TO GET THE MEDIA MANAGER PORT (S/R 2373)

An internal error occurred while initializing the Magneto Optical device.

Contact your HP Support Representative.

STORE/RESTORE FAILED TO GET MEDIA MANAGER PORT. MEDIA MANAGER DOES NOT APPEAR TO BE INSTALLED. (S/R 2374)

Your system does not have a Magneto Optical media manager software installed.

Check your installation process. Otherwise contact your HP Support Representative.

STORE SURROGATE ENCOUNTERED FOPEN FAILURE ON 'SYSLIST' FILE. (S/R 2401)

Surrogate failed to open the syslist file.

Check the syslist file equation and retry.

STORE SURROGATE ENCOUNTERED FOPEN FAILURE ON 'OFFLINE' FILE (S/R 2402)

Surrogate failed to open the offline file.

Check the offline file equation and retry.

STORE SURROGATE FAILED TO SEND IPC MESSAGE: IPC ERROR !. (S/R 2413)

System utility failure.

Call your Hewlett-Packard Support Representative.

STORE SURROGATE ENCOUNTERED ERROR READING STORE IPC MESSAGE: IPC ERROR !. (S/R 2417)

System utility failure.

Call your Hewlett-Packard Support Representative.

STORE SURROGATE CAUGHT BAD ESCAPE FROM SUBSYS ! WITH ERROR !. (S/R 2426)

Store internal error.

Call your Hewlett-Packard Support Representative.

FILE LABEL EXTENSIONS FOR FILE ! ARE TOO BIG TO BE STORED IN ONE MEDIA RECORD. (S/R 2427)

The record size of the store device are too small to hold all the file extension information.

If possible, increase the record size of the output device and reissue the store command.

STORE SURROGATE ENCOUNTERED FATAL SHADOW ERROR ! (S/R 2428)

The surrogate process encountered a fatal error from the SHADOW subsystem.

Report the error to your HP Support Representative.

STMGT RETURNED UNKNOWN ERROR. (S/R 2501)

Store could not decipher storage management error.

Call your Hewlett-Packard Support Representative.

STMGT WAS UNABLE TO CLOSE FILE CORRECTLY. VOLUME MANAGEMENT FAILED TO INCREMENT FILE OPEN COUNT (FOCT). (S/R 2502)

Store internal error.

Call your Hewlett-Packard Support Representative.

STMGT CANNOT OPEN THE FILE, LABEL IS INVALID, DEALLOCATED OR VOLUME WHERE LABEL RESIDES IS SPUN DOWN. (S/R 2503)

Store internal error.

Call your Hewlett-Packard Support Representative.

STMGT CANNOT OBTAIN SUFFICENT RESOURCES (GUFD/VSOD) TO OPEN THE FILE. (S/R 2504)

System internal error.

Call your Hewlett-Packard Support Representative.

STMGT VIEW OF THIS FILE IS OUT OF SYNC. (S/R 2505)

System internal error.

Call your Hewlett-Packard Support Representative.

STMGT COULD NOT MAP IN FILE BECAUSE FILE LIMIT IS 0. (S/R 2506)

Store internal error.

Call your Hewlett-Packard Support Representative.

STMGT COULD NOT MAP IN FILE BECAUSE IT IS IN USE FOR WRITING. (S/R 2507)

Some user has the file open for write.

Retry when the file is not in use.

STMGT COULD NOT MAP IN FILE (VOLUME(S) CONTAINING EXTENTS OF THE FILE MAY NOT BE MOUNTED). (S/R 2508)

Some unmounted volumes in the volume set.

Mount all volumes in the volume set and retry.

STMGT COULD NOT FILE VOLUME ID OF FILE ON THE SYSTEM (VOLUME MAY NOT BE MOUNTED). (S/R 2509)

Some unmounted volumes in the volume set.

Mount all volumes in the volume set and retry.

STMGT COULD NOT REMAP FILE TO NEW ACCESS RIGHTS. (S/R 2510)

Store internal error.

Call your Hewlett-Packard Support Representative.

STMGT WAS UNABLE TO CLOSE FILE CORRECTLY. VOLUME MANAGEMENT FAILED TO DECREMENT FILE OPEN COUNT (FOCT). (S/R 2511)

System internal error.

Call your Hewlett-Packard Support Representative.

STMGT WAS UNABLE TO CLOSE ROOT DIRECTORY NODE. (S/R 2512)

System internal error.

Call your Hewlett-Packard Support Representative.

STMGT WAS UNABLE TO CLOSE ACCOUNT DIRECTORY NODE. (S/R 2513)

System internal error.

Call your Hewlett-Packard Support Representative.

STMGT WAS UNABLE TO CLOSE GROUP DIRECTORY NODE. (S/R 2514)

System internal error.

Call your Hewlett-Packard Support Representative.

STMGT RETURNED BAD STATUS FROM SUBSYSTEM !, ERROR !. (S/R 2515)

System internal error.

Call your Hewlett-Packard Support Representative.

STMGT WAS UNABLE TO ACCESS GLOBAL UNIQUE FILE DESCRIPTOR (GUFD) OF FILE. (S/R 2516)

System internal error.

Call your Hewlett-Packard Support Representative.

GENFPARSE RETURNED UNKNOWN ERROR (S/R 2601)

GENFPARSE returned an unknown error to STORE/RESTORE (SUBSYS = FILE SYSTEM).

File a service request with Hewlett-Packard.

GENFPARSE RETURNED STATUS FROM SUBSYSTEM !, ERROR ! (S/R 2602)

GENFPARSE returned an unknown error to STORE/RESTORE (SUBSYS = UNKNOWN).

File a service request with Hewlett-Packard.

INVALID CHARACTER FOUND IN THE FILESET SPECIFIED (S/R 2603)

An invalid character was detected in the specified fileset.

Correct the fileset name.

THE FILE SET PATH SPECIFIED IS TOO LONG (S/R 2604)

The specified file set path combined with the current working directory exceeds the maximum allowed path length.

Copy the file into a shorter length directory and then store.

THE FILE SET USES MALFORMED CHARACTER CLASS (S/R 2605)

The file set uses malformed character class.

Correct the fileset name.

A FILE NAME IN SPECIFIED PATH BEGINS WITH A "-" (S/R 2608)

A file name in specified path begins with a "-".

Correct the fileset name.

A FILE SET SPECIFIED BEGINS WITH A "//" (S/R 2609)

A file set specified begins with a "//".

Correct the fileset name.

A NEGATIVE FILE SET CONTAINS ".." (S/R 2610)

A negative HFS file set containing ".." was found following an MPE file set.

Either make the right hand side MPE syntax or make the left hand side HFS syntax.

A NEGATIVE HFS FILE SET FOUND AFTER MPE FILESET. IF THE LEFT HAND SIDE OF THE "fileset1 - fileset2" IS AN MPE SET THEN THE RIGHT HAND SIDE MUST BE AN MPE FILESET. NOTE THAT AN UNQUALIFIED FILESET IS ALSO CONSIDERED AN HFS SET IF CURRENT WORKING DIRECTORY IS NOT A GROUP. (S/R 2611)

A negative HFS file set was found following an MPE file set.

Either make the right hand side MPE syntax or make the left hand side HFS syntax.

THE HFS DOMAIN FILESET IS NOT ALLOWED WITH THE RENAME OPTION (S/R 2612)

An attempt was made to use an HFS domain file set with the RENAME option.

Remove the RENAME option.

A NAME COMPONENT IN THE PATH SPECIFIED EXCEEDS THE MAXIMUM ALLOWED NAME LENGTH (S/R 2613)

A HFS syntax filename component was too long.

Check the spelling and syntax of your input and retype the STORE command.

HFS FILE SCANNER ERROR SUBSYSTEM !, ERROR ! (S/R 2651)

An unknown error was retured from the HFS scanner.

File a service request with Hewlett-Packard.

! NOT STORED: PATH DOES NOT EXIST

The specified path does not exist.

Check the path name and retry.

HFS FILE SCANNER ERROR SUBSYSTEM !, ERROR ! (S/R 2651)

An unknown error was retured from the HFS scanner.

File a service request with Hewlett-Packard.

! NOT STORED: PATH DOES NOT EXIST

The specified path does not exist.

Check the path name and retry.

! NOT STORED: SPECIFIED DIRECTORY TOO DEEP

The specified directory is too many levels deep.

Copy the files into a shallower level directory and then store.

! NOT STORED: UNKNOWN SCAN ERROR

An unknown error was retured from the HFS scanner.

File a service request with Hewlett-Packard.

! NOT STORED: SECURITY VIOLATION

A security violation was encountered.

Request that your system manager store the file.

! NOT STORED: NO TRAVERSE ACCESS

The operation requires that the user have Traverse Directory (TD) access.

Request your system manager to store the file.

! NOT STORED: EXCLUSIVE OPEN VIOLATION

An exclusive file open violation occurred.

Wait for the file to be closed, then store.

! NOT CONSIDERED: PATH NAME TOO LONG

The specified path name is too long

Copy the file into a shorter length directory and then store.

! NOT STORED: SCANNER FAILED TO HPFOPEN NODE

The scanner failed to HPFOPEN the node.

File a service request with Hewlett-Packard.

! NOT STORED: PATH NAME TOO LONG

The specified path name is too long.

Copy the file into a shorter length directory and then store.

! SKIPPED: TRANSPORT TO MPE/XL INFORMATION FILE

The file HFSMAP._HFSGROUP._HFSACCT was not restored.

Information only.

! NOT STORED: PATH NAME CONTAINED TOO MANY SYMBOLIC LINKS POSSIBLE CIRCULAR DEFINITION I.E. LINKA -> LINKB, LINKB -> LINKA

The maximum number of symbolic link traversals was exceeded. This could indicate a circular definition.

Check the syntax of the input file set and reissue the store command.

THE UNDERBAR CHARACTER IS NOT ALLOWED WITH MPE SYNTAX CFILE NAME (S/R 2701)

The underbar character (_) was specified as part of the file name in an MPE syntax entry.

Remove the underbar character or use HFS syntax.

THE UNDERBAR CHARACTER IS NOT ALLOWED WITH MPE SYNTAX GROUP NAME (S/R 2702)

The underbar character (_) was specified as part of the group name in an MPE syntax entry.

Remove the underbar character or use HFS syntax.

THE UNDERBAR CHARACTER IS NOT ALLOWED WITH MPE SYNTAX ACCOUNT NAME (S/R 2703)

The underbar character (_) was specified as part of the account name in an MPE syntax entry.

Remove the underbar character or use HFS syntax.

STORE/RESTORE FAILED TO GET CURRENT WORKING DIRECTORY FROM HIERARCHIAL DIRECTORY SUBSYSTEM. LOGON GROUP ASSUMED AS THE CURRENT WORKING DIRECTORY (S/R 2704)

STORE/RESTORE failed to get the current working directory from the hierarchial directory subsystem.

File a service request with Hewlett-Packard.

! NOT RESTORED: COULD NOT CREATE PATH

The file was not stored because the path could not be created.

Check to ensure that you have create directory capabilities.

FAILED TO CREATE TRANSPORT MAPPING FILE (S/R 2706)

The transport mapping file was not created due to the lack of available disk space.

Check for available disk space. If that is not a problem, then file a service request with Hewlett-Packard.

RESTORE FAILED TO LINK IN THE OBJECT, ENCOUNTERED ERROR ! FROM HPDIR SUBSYSTEM (S/R 2707)

RESTORE failed to link in the object.

File a service request with Hewlett-Packard.

! NOT RESTORED: CREATE=PATH OPTION NEEDED

The file was not restored because the CREATE=PATH option is needed to create the missing portions of the file path.

Specify the CREATE=PATH option.

STORE/RESTORE ENCOUNTERED PASCAL LIBRARY ERROR !, AT CODE OFFSET ! (S/R 2709)

A Pascal Library error was encountered.

File a service request with Hewlett-Packard.

! NOT STORED: ACD TRANSLATION ERROR (S/R 2710)

An ACD translation error was encountered.

File a service request with Hewlett-Packard.

! NOT RESTORED: PATH IS NOT A DIRECTORY (S/R 2711)

The specified path is not a directory.

Remove the existing file conflicting with the incoming path and retry.

RESTORE ENCOUNTERED ERROR ! FROM SUBSYS ! WHILE CREATING USER/GROUP DATABASE. THE PXUTIL.PUB.SYS UTILITY SHOULD BE RUN BY THE SYSTEM MANAGER TO RECREATE THE DATABASES.

An error was encountered while creating the User/Group Database.

The system manager should run the PXUTIL.PUB.SYS utility to recreate the databases. Also you should file a service request with Hewlett-Packard.

THE BACKWARD TRANSPORT NAMES GENERATED FOR HIERARCHIAL DOMAIN FILES WRAPPED AROUND. RESTORING THIS MEDIA ON MPE XL 4.0 AND BEFORE MAY NOT RESTORE ALL OF THE HFS DOMAIN FILES. (S/R 2713)

The backward transport names generated for hierarchial domain files wrapped around.

Do not use this media for backward migration to pre-HFS systems.

! NOT RESTORED: ERROR WAS ENCOUNTERED RESTORING ACD/OWNER OF THIS DIRECTORY. (S/R 2714)

An error was encountered restoring the ACD/Owner of this directory.

Check capabilities to alter the existing directory. If the capabilities are appropriate, then file a service request with Hewlett-Packard.

THE UDERBAR CHARACTER IS NOT ALLOWED WITH MPE SYNTAX LOCKWORD. (S/R 2715)

An attempt was made to use the underbar character (_) as part of the lockword.

Remove the underbar character from the lockword.

! NOT RESTORED: SECURITY VIOLATION. FAILED TO RESET OWNER OF THIS DIRECTORY ON DISK (S/R 2716)

A security violation was encountered while attempting to reset the owner of the directory.

Check capabilities to alter the existing directory. If the capabilities are appropriate, then file a service request with Hewlett-Packard.

! NOT RESTORED: SECURITY VIOLATION. FAILED TO RESET ACD OF THIS DIRECTORY ON DISK (S/R 2717)

A security violation was encountered while attempting to reset the ACD of the directory.

Check capabilities to alter the existing directory. If the capabilities are appropriate, then file a service request with Hewlett-Packard.

! WILL BE RESTORED WITH ORIGINAL CREATOR. SECURITY VIOLATION WHILE ATTEMPTING TO ALTER CREATOR

The UID for this file could not be altered.

Check capabilities to alter the creator. If the capabilities are appropriate, then file a service request with Hewlett-Packard.

NAME BUFFER OVERFLOWED WHILE TRYNIG TO DISPLAY A FILE MESSAGE. (S/R 2719).

The HFS syntax name is too long to be displayed.

None - the name of this file will not be displayed.

! NOT RESTORED: SYSTEM RESTRICTION ON SAVE FILE

The file could not be restored because of implementation. Possiblities include trying to save "." or ".." to the directory.

Contact your HP representative.

'NODECOMPRESS' CANNOT BE USED WITH THE 'LISTDIR' OPTION (S/R 2732)

The NODECOMPRESS and LISTDIR options cannot be used together.

Remove one of the two options and retype the command.

WARNING: 'NODECOMPRESS' OPTION REDUNDANTLY SPECIFIED (S/R 2733)

The NODECOMPRESS option was entered more than once.

Information only.

VSTORE WAS UNABLE TO ALLOCATE SUFFICIENT MEMORY RESOURCES TO CARRY OUT DECOMPRESSION VALIDATION (S/R 2734)

Due to memory pressure, VSTORE failed to allocate necessary memory.

Attempt to free up some memory on the system and reissue the command.

WARNING: 'STATISTICS' OPTION HAS BEEN REDUNDANTLY SPECIFIED (S/R 2744)

The STATISTICS option was specified more than once.

Information only.

'STATISTICS' OPTION CANNOT BE USED WITH 'TRANSPORT' TO MPEv. (S/R 2745)

The STATISTICS option cannot be used when creating MPEv media.

Remove one of the options and re-run the command.

! DATABASE NOT STORED: ERROR RETRIEVING FILE LIST OF IMAGE DATABASE

STORE cannot store the specified IMAGE database because it could not determine what files were in the database.

Make sure that the root file of your database is not corrupted. You can also specify the ;PARTIALDB option to force STORE to store all available database files.

! DATABASE NOT STORED: ERROR RETRIEVING FILE LIST OF ALLBASE DATABASE

STORE cannot store the specified ALLBASE database because it could not determine what files were in the database.

Make sure that the root file of your database is not corrupted. You can also specify the ;PARTIALDB option to force STORE to store all available database files.

! NOT STORED: FILE IS PART OF AN IMAGE DATABASE AND ROOT IS NOT SPECIFIED.

Your fileset list includes files which belong to an image database whose root file is not specified.

Specify the root file name in the fileset list or use ;PARTIALDB option to force STORE to store all available database files.

! NOT STORED: FILE IS PART OF AN ALLBASE DB ENVIRONMENT AND DBCON IS NOT SPECIFIED.

Your fileset list includes files which belong to a ALLBASE database whose DBCON file is not specified in the fileset.

Include the DBCON file in your fileset list or use ;PARTIALDB option to force STORE to store all available database files.

! ALLBASE DATABASE FAILED TO COMPLETE PROPERLY

An error occurred while storing an ALLBASE database during a 7x24 True-Online backup.

Contact your HP Support Representative.

ERROR QUIESCING IMAGE DATABASE ! , STATUS = !

STORE encountered error during quiesceing (wait for database transactions to complete) the IMAGE database.

Contact your HP Support Representative.

ERROR QUIESCING ALLBASE DATABASE ! , STATUS = !

STORE encountered error while quiesceing (wait for database transactions to complete) the ALLBASE database.

Contact your HP Support Representative.

! ERROR CHECKING QUIESCE STATUS FOR IMAGE DATABASE

STORE encountered error while quiesceing (wait for database transactions to complete) the IMAGE database.

Contact your HP Support Representative.

! ERROR CHECKING QUIESCE STATUS FOR ALLBASE DATABASE

STORE encountered error while quiesceing (wait for database transactions to complete) the ALLBASE database.

Contact your HP Support Representative.

! ERROR UNQUIESCING IMAGE DATABASE

STORE encountered while unquiescing (allow new transactions to start) the IMAGE database.

Call your HP Support Representative.

! ERROR UNQUIESCING ALLBASE DATABASE

STORE encountered an error while unquiescing (allow new transactions tostart) the ALLBASE database.

Contact your HP Support Representative.

! DATABASE NOT STORED: FILE MISSING FROM IMAGE DATABASE

All of the files in the TurboIMAGE database could not be found on the system.

STORE will not store an incomplete database, by default. Make sure all database files exist on the system. If you need to store an incomplete database, use the ;PARTIALDB option.

! DATABASE NOT STORED: FILE MISSING FROM ALLBASE DATABASE

All of the files in the ALLBASE database could not be found on the system.

STORE will not store an incomplete database, by default. Make sure all database files exist on the system. If you need to store an incomplete database, use the ;PARTIALDB option.

! NOT RESTORED: A FILE OF THIS APPLICATION SET WAS PURGED DURING STORE

When the database was stored, one of more of the files in the database was purged before the sync point. Since RESTORE cannot restore the entire database, it will not restore any of the files in the database.

If you really need to restore all of the files in the database, even though the database will be incomplete, specify the ;PARTIALDB option and restore the files again.

! NOT STORED: UNEXPECTED TRAP OCCURRED WHILE ATTACHING FILE

Unexpected error occurred while adding this file to the media directory list.

Make sure the file exists and try the STORE command again.

WARNING: UNEXPECTED TRAP OCCURRED WHILE DETACHING FILE ! (S/R 3001)

Unexpected error occurred while disabling the logging and releasing the resources for this file.

Do a VSTORE to verify that this file was stored properly. Otherwise try storing the file again.

SHADOW WAS UNABLE TO INITIALIZE THE UFID HASH/CACHE SEMAPHORE (S/R 3002)

Internal error occurred while initializing the logging facility for the store.

Report the error received to your HP Support Representative.

AN UNEXPECTED TRAP OCCURRED WHILE CREATING THE SHADOW ENVIRONMENT (S/R 3003)

An internal error occurred while creating the logging facility for the store.

Report the error received to your HP Support Representative.

AN UNEXPECTED TRAP OCCURRED WHILE INSERTING THE SHADOW ENVIRONMENT INTO THE GLOBAL SHADOW CONTROL BLOCK (S/R 3004)

An internal error occurred while creating the logging facility for the store.

Report the error received to your HP Support Representative.

SHADOW WAS UNABLE TO GET ITS KSO WHILE RELEASING THE SHADOW ENVIRONMENT (S/R 3005)

An internal error occurred while creating the logging facility for the STORE.

Report the error received to your HP Support Representative.

SHADOW WAS UNABLE TO LOCK THE GLOBAL CONTROL BLOCK WHILE RELEASING THE SHADOW ENVIRONMENT (S/R 3006)

An internal error occurred while creating the logging facility for the store.

Report the error received to your HP Support Representative.

! NOT STORED: FILE SEMAPHORE NOT OBTAINED DURING ATTACH

Shadow logging failed for this file.

Close the file and try storing the file again.

! NOT STORED: FILE CLOSE FAILED DURING ATTACH

An internal error occurred during shadow logging.

Try storing the file again.

! NOT STORED: UNEXPECTED FATAL SHADOW ERROR ! ENCOUNTERED

An unexpected internal error occurred while logging the file.

Try storing the file again and report this error to your HP Support Representative.

SHADOW WAS UNABLE TO GET A SEMAPHORE FOR THE GLOBAL SHADOW ENVIRONMENT (S/R 3009)

An internal error occurred during shadow logging.

Report this error to your HP Support Representative.

SHADOW GET AI LOGGING INFO ROUTINE ENCOUNTERED ERROR (S/R 3020)

An internal error occurred while shadow logging.

Report this error to your HP Support Representative.

SHADOW ENABLE AI LOGGING ROUTINE ENCOUNTERED ERROR (S/R 3021)

An internal error occurred while shadow logging.

Report this error to your HP Support Representative.

SHADOW NOTIFY SYNC POINT ROUTINE ENCOUNTERED ERROR (S/R 3022)

An internal error occurred while shadow logging.

Report this error to your HP Support Representative.

SHADOW ENABLE STORE RECOVERY ROUTINE ENCOUNTERED ERROR (S/R 3023)

An internal error occurred while shadow logging.

Report this error to your HP Support Representative.

AN ERROR TRAP OCCURRED WHILE GETTING IMAGE OF THE USER MAPPED FILE AT THE SYNC POINT

An internal error occurred while shadow logging this file.

Try storing the file again.

! WARNING: LOG DATA WRITTEN FOR FILE MAY NOT BE THE MOST RECENT

This cm file was open during sync point. So the copy of the file stored may not be a very recent copy. The copy was taken either at the last close or FCONTROL 6.

Close the file and try storing the file again.