5.3 Listing the System Configuration

1. Check that all hardware peripherals are attached and powered on.

2. Start ODE.

   
     ISL>ODE
   
   

3. Display hardware configuration.

   
     ODE>RUN MAPPER
   
   

   The figure on the following page is a sample of a MAPPER display.

4. Record the I/O configuration for your system.

   Find the MPE/XL Model String. Then refer to Appendix B "Configuration Tables" for the configuration group name for your HP 3000 model in the SCSI column. For example, for a Model 995, the SCSI group is CONFG995. It is very important to have the exact group name. Check carefully for numbers zero and 1 and letters O and I.

5. Exit mapper.

   
     ODE>EXIT
   
   

   Figure 5-1 Sample Listing MAPPER Output

   
    STARTING EXECUTION OF MAPPER
   
    Processor Identification:    Hardware Model:  590H, Revision: 0
      Software Model:  4H, Revision:  0
      Hardware ID:  0, Software ID:  250911381 (unsigned decimal)
      Software Cap:  0x10000031
      MPE/XL Model String: 979-400
      Processor Board Revisions:
          CPU - CPU Chip:                   769
          PDC - Processor Dependent Code:   38.29
      Cache and TLB Sizes:
          Instruction Cache:  1024 K bytes, Instruction TLB:  96 entries
          Data Cache:         1024 K bytes, Data TLB:         96 entries
      Co-processors:
           Floating Point Co-processor is installed
   
    I/O Configuration:
                                             Type   HW    SW   Revisions
    Path      Component Name                  ID    Mod   Mod  Hdwr Firm
    --------- ------------------------------ ----- ----- ----- ---- ----
    8          I/O Adapter                   CH    580H  BH    15   1
    8/63       GSC+ Port                     7H    501H  CH    1    3
    10         I/O Adapter                   CH    580H  BH    15   1
    10/4       Upper Bus Converter           7H    500H  CH    0    0
    10/4/0     HP-PB LAN/Console             2H    5H    60H   0    1
    10/4/4     HP-PB Fast Wide SCSI          4H    4H    3BH   0    0
    10/4/4.2.0  SEAGATE ST318275LC           -     -     -     -    HP00
    10/4/4.3.0  SEAGATE ST39175LC            -     -     -     -    HP00
    10/4/4.4.0  SEAGATE ST39175LC            -     -     -     -    HP00
    10/4/8     HP-PB SCSI                    4H    4H    39H   0    0
    10/4/8.0.0  SEAGATEST32550N disk drive   -     -     -     -    HP10
    10/4/8.1.0  SEAGATE ST34572WC            -     -     -     -    HP01
    10/4/8.2.0  SEAGATE ST32272WC            -     -     -     -    HP01
    10/4/9     HP-PB Centronics              5H    4H    3AH   0    0
    10/4/20    HP-PB SCSI                    4H    5H    39H   0    0
    10/4/20.0.0  HPC1533A/C1530B tape drive  -     -     -     -    AN04
    10/4/20.1.0  HPC1533A/C1530B tape drive  -     -     -     -    AN04
    10/4/24    HP-PB Fast Wide SCSI          4H    5H    3BH   0    0
    10/4/24.3.0  SEAGATE ST34371W disk drive -     -     -     -    HPM2
    10/4/24.4.0  SEAGATE ST34371W disk drive -     -     -     -    HPM2
    10/4/24.5.0  Quantum XP34361WD           -     -     -     -    HP10
    10/4/24.6.0  SEAGATE ST34371W disk drive -     -     -     -    HPM4
    10/4/60    HP-PB Port                    7H    103H  CH    0    0
    10/16      Upper Bus Converter           7H    500H  CH    0    0
    10/16/60   HP-PB Port                    7H    103H  CH    0    0
    10/63      GSC+ Port                     7H    501H  CH    1    3
    32         MoHawk Processor              0H    590H  4H    0    0
    34         MoHawk Processor              0H    590H  4H    0    0
    36         MoHawk Processor              0H    590H  4H    0    0
    38         MoHawk Processor              0H    590H  4H    0    0
    49         Memory (1024 M bytes)         1H    32H   9H    0    0
                 Extender 0
                    slot 0A/0B   bank  3:  64MB
                                 bank  8:  64MB
                    slot 1A/1B   bank  7:  64MB
                                 bank 12:  64MB
                    slot 2A/2B   bank  4:  64MB
                                 bank 15:  64MB
                    slot 3A/3B   bank  0:  64MB
                                 bank 11:  64MB
                    slot 4A/4B   bank  5:  64MB
                                 bank 14:  64MB
                    slot 5A/5B   bank  1:  64MB
                                 bank 10:  64MB
                    slot 6A/6B   bank  2:  64MB
                                 bank  9:  64MB
                    slot 7A/7B   bank  6:  64MB
                                 bank 13:  64MB
    RUN COMPLETED.
   
   

• Listing the System Configuration completed. Go to the next section on your checklist.