Protocol Configuration

The Protocol Configuration screen (#113) in Figure 12-4 “Protocol Configuration Screen” is displayed when you press the [Go To PROTOCOL] function key at the Gateway Half Network Interface Configuration screen (Figure 12-3 “Gateway Half Network Interface Configuration Screen”). It is also displayed when you type the path name:

@NETXPORT.NI.NIname.PROTOCOL

in the command window of any screen and press the [Enter] key, where NIname is the configured gateway half NI.

Figure 12-4 Protocol Configuration Screen

For the gateway half NI, you must configure the IP protocol. The dial protocol must be configured only if you have any switched lines.

Choose the protocol to configure and press the corresponding function key.