100Base-T Network Interface Link

The 100Base-T Network Interface Link screen (#109) in Figure 11-8 “BT100 Network Interface Link Screen” is displayed when you press the [Go To LINK] function key at the BT100 Network Interface Configuration screen (Figure 11-3 “BT100 Network Interface Configuration Screen”). It is also displayed when you type the path name:

@NETXPORT.NI.NIname.LINK

in the command window of any screen and press the [Enter] key, where NIname is a configured BT100 NI.

Figure 11-8 BT100 Network Interface Link Screen

Use this screen to specify the link name for the NI. The link name is used by the network transport when establishing connections.

Fields

Link name: Make sure this is the same link name configured at the LAN Link Configuration screen (path name LINK). Press the [Save Data] function key to save the link name in the configuration file. Verify that the link name has been configured by checking that the Data flag is set to Y.

This screen associates the link data with the BT100 network interface data. The link name is used by the network transport when establishing connections. The link name can contain as many as eight alphanumeric characters, and the first character must be alphabetic.

To change an existing link name, enter the new name in the Link name field and press the [Save Data] function key.

100Base-T Network Interface Link

Technical documentation

» Table of Contents

» Glossary

» Index

Fields