The X.25 Link Configuration screen (#106) shown in Figure 7-12 “X.25 Link Configuration Screen” is displayed when you
select an NI link name and press the [Add] or [Modify]
function key at the X.25 Network Interface Link screen (Figure 7-11 “X.25 Network Interface Links Screen”). It is also displayed
when you type the path name:
@NETXPORT.NI.NIname.LINK.linkname
in the Command window of any screen and press the [Enter]
key, where NIname is a configured X.25 NI,
and linkname is a configure X.25 link.
Figure 7-12 X.25 Link Configuration Screen
Press the [Save Data] function key to transfer
the data displayed on the screen to the configuration file you are
creating or updating. Verify that the data record has been created
by checking that the Data flag is set to Y.
Fields
- Start device on network initialization (Y/N)
Answer Y (Yes)
if you want the device connected over this link to be started when
the network is first initialized. Answer N
(No) if you do NOT want the device started when the network is first
initialized.
Default value: Y
Range: Y or N