NS 3000/iX NMMGR Screens Reference Manual: HP 3000 MPE/iX Computer Systems > Chapter 2 Introductory ScreensNS Configuration |
|
If you press the [NS] function key from the Main screen, the NS Configuration screen (#166) shown in Figure 2-4 “NS Configuration Screen” appears. You have a choice of selecting guided or unguided configurations. Use the function keys on this screen to select the guided or the unguided configuration branch for NS configuration. If you are using domain names for network access, enter the domain name for the system you are configuring in the local domain name field in place of the local node name. (If you are not using domain names, leave the local node name as is.) If you are entering a domain name, press the [Save Data] key to save the domain name in the configuration file before continuing. Hewlett-Packard recommends that you press the [Guided Config] key to select the guided configuration branch whenever you need to initially configure a network interface. Guided configuration supplies many default values for your configuration and requires that you visit a minimal number of screens. To use the guided configuration screens, refer to the HP 3000/iX Network Planning and Configuration Guide. If you need to modify configuration values that are not available on the guided screens, press the [Unguided Config] key to select the unguided configuration branch. This manual provides information on every screen available to you through unguided NS configuration. Fields
|