Software Configuration Maximums (MPE/iX 6.0)

The following are the software maximums in Table 1-1 “Configuration Maximums” that must be adhered to when configuring a supported link. These maximums may be further limited by the system hardware (number of available slots). Maximums are also documented throughout the manual for the appropriate screen.

Table 1-1 Configuration Maximums

Screen Number/Description	Path	Maximum Limit
#9 Network Directory Select Node Name	None	File Size Limit^[1]
#85 Link Selection	LINK	256/system
#112 Network Interface Configuration	NETXPORT.NI	12 NI/system^[2]
#115 Point-to-Point Mapping Configuration	NETXPORT.NI.NIname.MAPPING	1024 Mappings/Router
#117 Gateway Half NI Links	NETXPORT.NI.NIname.LINK	1 link/Gateway Half NI
#119 Point-to-Point NI Links	NETXPORT.NI.NIname.	40 links/Router NI
#151 X.25 Network Interface Links	NETXPORT.NI.NIname.LINK	12 links/X.25 NI
#152 Neighbor Gateways	NETXPORT.NI.NIname.INTERNET	14 gateways/NI
#158 Neighbor Gateway Reachable Networks	NETXPORT.NI.NIname.INTERNET.gatewayn	2550 nets/NI^[3]
#162 X.25 SVC Address Key Paths	NETXPORT.NIname.PROTOCOL.X25.SVCPATH	2048/X.25 NI
#163 X.25 PVC Address Key Paths	NETXPORT.NIname.PROTOCOL.X.25.PVCPATH	128/X.25NI
#164 X.25 User Facility Sets	NETXPORT.NI.NIname.POROTOCOL.X25.FACSET	128/X.25 NI
^[1]Maintenance Node command EXPANDDIR may be used to expand the directory file. Refer to Using the Node Management Services (NMS) Utilities manual for information regarding this command. ^[2]One NI must be used for loopback. ^[3]2,550 reachable networks (255 pages and 10 reachable nets per page).

Software Configuration Maximums (MPE/iX 6.0)

Technical documentation

» Table of Contents

» Glossary

» Index