Showing the State of Configurators

The SHOW command (abbreviated SH) displays the current state of the SYSGEN global facilities.

SHOW has the following syntax:

        SHOW    [TYPE =   BASEGROUP    ]

                        [ NEWGROUP     ]

                        [ VERSION      ]

                        [ PERMYES      ]

                        [ CONFIGURATOR ]

                        [ ALL          ]

                [DEST =   OFFLINE      ]

BASEGROUP lists the name of the current working configuration's base group.

NEWGROUP lists the name of the current new configuration group.

VERSION displays the version number of SYSGEN. The version number is also displayed in the SYSGEN banner.

PERMYES shows whether SYSGEN prompts you for confirmation before performing potentially serious commands.

CONFIGURATOR lists all modified configurators.

ALL provides a combined listing of the configuration information provided by the TYPE parameters defined above.

OFFLINE sends output to SYSGEN's listing file, SYSGLIST. Using OFFLINE in the SHOW command line does not immediately generate a printout. The information is sent to SYSGLIST until you either enter the OCLOSE command or exit SYSGEN. Exiting SYSGEN or using OCLOSE closes SYSGLIST and prints the file.

Entering SHOW without TYPE parameters is the same as specifying SHOW ALL. Example 4-6 demonstrates using the SHOW ALL command.

   sysgen>SHOW ALL

          base configuration group = CONFIG

          new configuration group =

          SYSGEN version D.01.01 : catalog version D.01.01

          permyes is false--system will have to answer

   questions

          ** no configurators are modified**