:MPECommand | Syntax
for MPECommand | Executes
MPECommand. MPECommand
must be a programmatically executable MPE command. |
ADDCONF | ADDCONF
pathname [type] | Adds subtree
of empty records to the configuration file. |
ADDLDEV | ADDLEV | {dtcname} {dtc-nodename} {station-address | [filename] | Adds LDEVs to
a DTC card. |
ADDLU | ADDLU
SNAnodename [filename] | Adds LUs
to the SNA node transport screen. |
ADDNODE | ADDNODE
[filename] | Adds or
updates a node in the current network directory. |
ADDVC | ADDVC [filename | Adds
a virtual circuit address key to the network directory and to the
configuration file. |
CARDCONF | CARDCONF
cardno | Sets the
current DTC card number for the READALLCONF, READCONF, UPDATECONF,
and WRITECONF commands. |
COMPRESSCONF | CARDCONF
cardno | Compresses
or expands the current configuration file. |
CONTINUE | CONTINUE
[ON or OFF] | Prevents
NMMGR from terminating in a job because of a maintenance mode error. |
COPYCONF | COPYCONF
srcpath[:srcfile][,[destpath][:destfle]][;KEEP][;NOVERS] |
| Copies
a configuration subtree |
DELETECONF | DELETECONF
path | Deletes
a subtree from the current configuration file. |
DELETENODE | DELETENODE
[nodename] | [:LOCAL] [:GLOBAL] | Deletes an entry
from the network directory. |
DTSDYNCONF | DTSDYNCONF
[ON or OFF or PERMOFF] | Control
the display of the dynamic configuration question and execution
of DTCCNTRL when DTS validation is complete. |
DTSXVAL | DTSXVAL
[ON or OFF] | Enable
or suppress automatic cross-validation with SYSGEN. |
EXIT | EXIT | Exits from
maintenance mode. |
EXITVALIDATE | EXITVALIDATE subsystem [ON or OFF] | Validates
a subsystem's configuration, if needed, when exiting from
NMMGR. |
EXITWARN | EXITWARN
subsystem [ON or OFF] | Warns the
user that a subsystem needs to be validated before exiting NMMGR. |
EXPANDDIR | EXPANDDIR
numrecs | Increases
the capacity of a network directory file. |
HELP | HELP
[keyword] | Calls up
the help function. |
LISTDIR | LISTDIR
[nodename] | Lists the
contents of a network directory. |
LISTLDEV | LISTLDEV | {dtcname} {dtc-nodename} {station-address} | [filename] | Lists LDEVS for a DTC card in a format compatible
with ADDLDEV. |
LISTLU | LISTLU
SNAnodename [filename] | Lists LUs
in a format compatible with ADDLU |
MAKESTREAM | MAKESTREAM
streamfile, nodefile, commandfile | Creates a job stream used to perform
network directory or configuration file updates on remote nodes. |
MERGEDIR | MERGEDIR | {otherdir [,nodename[}
{configfile} | [;LOCAL] [;KEEP]
[;NOKEEP] [;TIMESTAMP][;GLOBAL] | Merges entries
from another network directory or configuration file into the current
network directory. |
NICONF | NICONF
niname [nitype] | Sets up
paths to add or update NETXPORT NI configurations. |
OPENCONF | OPENCONF
fileref | Opens a
nodal configuration file and makes it the current configuration
file. |
OPENDIR | OPENDIR fileref | Opens
a network directory file and makes it the current directory. |
PAGECONF | PAGECONF
pageno | Sets the
page number for multipage data screens. |
PASSWORD | PASSWORD
[password] | Sets the
password. Validates the NETXPORT subsystem configuration. Changes
the password to allow write access on the OPEN screen. |
PATHCONF | PATHCONF[=]path | Sets the
current path in the current configuration file. |
PURGECONF | PURGECONF
[pathname] | Deletes
the subtrees of records from the configuration file. |
PURGELDEV | PURGELDEV | {dtcname} {dtc-nodename} {station-address} | [filename] | Purges LDEVs from the DTC card. |
PURGELU | PURGELU
SNAnodename [filename] | Purges
LUs from the SNA node transport screen. |
PURGENI | PURGENI
[niname] | Purges
a network interface from the configuration file and performs cleanup. |
PURGEVC | PURGEVC
[filename] | Deletes
a virtual circuit address key from the network directory and the
configuration file. |
READALLCONF | READALLCONF
[;FORMAT] | Reads all
data from the current configuration record. |
READCONF | READCONF
fieldname [;FORMAT] | Reads selected
data from the current configuration record. |
SUMMARYCONF | SUMMARYCONF subsysem[, subsystem[, ...]] | Prints
a report for one or more communications subsystems. |
UPDATECONF | UPDATECONF | Updates
the current path in the configuration file. |
VALIDATECONF | VALIDATECONF
subsystem | Validates
subsystem configuration. |
VERSIONCONF | VERSIONCONF
version | Checks
whether the specified version number matches NMMGR's current version
number. |
WRITECONF | WRITECONF
fieldname, data | Writes
data to individual fields of the current path in the configuration
file. |