Informational Messages

Informational messages are issued when an expected condition occurs during normal processing. No action is required.

NOTE: Target device at node <node_name> board <board_number> port <port_number> TCP port <tcp_port_number>

Level: (400)

CAUSE: Indicates the location of the device on the remote terminal server.

NOTE: Created pseudonym <pseudonym_name>

Level: (401)

CAUSE: Indicates the name of the pseudonym created for use.

NOTE: Linked pseudonym <pseudonym_name> to master <master_pty_name> slave <slave_pty_name> file descriptor <file_descriptor>

Level: (402)

CAUSE: Indicates the association of the pseudonym with a pty.

NOTE: Closing connection

Level: (403)

CAUSE: Indicates the closing of a network connection to the remote terminal server due to the serious error given in the accompanying message (either message (103) or message (108)).

NOTE: Received open request from application <process_identifier>

Level: (404)

CAUSE: Indicates the reception of an open request for a pseudonym by the application specified.

NOTE: Set pty characteristics

Level: (405)

CAUSE: Indicates the setting of the initial pty characteristics.

NOTE: Sending initial status request to device

Level: (406)

CAUSE: Indicates the sending of a status request to the device on the remote terminal server before any data is sent to that device.

NOTE: Received close request from application <process_identifier>

Level: (407)

CAUSE: Indicates the reception of a close request for a pseudonym by the application specified.

NOTE: Received control device request from application <process_identifier>

Level: (408)

CAUSE: Indicates the reception of a control device request for a pseudonym by the application specified.

NOTE: Sending terminating status request to device

Level: (409)

CAUSE: Indicates the sending of a status request to the device on the remote terminal server after all data is sent to that device.

NOTE: Sent Telnet break to device

Level: (410)

CAUSE: Indicates the sending of a Telnet break sequence to the remote terminal server.

NOTE: Sent STOP character to device

Level: (411)

CAUSE: Indicates the sending of a STOP data flow character (usually control-S) to the device on the remote terminal server.

NOTE: Sent START character to device

Level: (412)

CAUSE: Indicates the sending of a START data flow character (usually control-Q) to the device on the remote terminal server.

NOTE: Sent are you there sequence to device

Level: (413)

CAUSE: Indicates the sending of a response to a Telnet are you there sequence to the remote terminal server.

NOTE: Aborted output for application

Level: (414)

CAUSE: Indicates the abortion of output from the application to the device on the remote terminal server.

NOTE: Erased character or line for application

Level: (415)

CAUSE: Indicates the erasure of a character or line of data from the device on the remote terminal server to the application.

NOTE: Received terminal type subnegotiation <terminal_name>

Level: (416)

CAUSE: Indicates the reception of the device type from the device on the
remote terminal server.

NOTE: Connected to device at node <node_name> TCP port number <tcp_port_number>

Level: (417)

CAUSE: Indicates the location of the device on the remote terminal server to which connected.

NOTE: Sent timing mark negotiation

Level: (418)

CAUSE: Indicates the sending of a timing mark negotiation request to the remote terminal server.

NOTE: Waiting <telnet_timer> seconds for timing mark negotiation reply

Level: (419)

CAUSE: Indicates the number of seconds to wait for a timing mark negotiation reply from the remote terminal server.

NOTE: Timing mark negotiation reply received

Level: (420)

CAUSE: Indicates the successful completion of a timing mark negotiation.

NOTE: Waiting <timeout> seconds for Telnet negotiation reply

Level: (421)

CAUSE: Indicates the number of seconds to wait for a Telnet negotiation reply from the remote terminal server.

NOTE: Sent status request

Level: (422)

CAUSE: Indicates the sending of a status request to the device on the remote terminal server.

NOTE: Waiting <status_timer> seconds for status reply

Level: (423)

CAUSE: Indicates the number of seconds to wait for a status reply from the device on the remote terminal server.

NOTE: Printer ready

Level: (424)

CAUSE: Indicates that the printer is ready for print requests.

NOTE: Sent binary negotiation

Level: (425)

CAUSE: Indicates the sending of a binary negotiation request to the remote terminal server.

NOTE: Waiting <telnet_timer> seconds for binary negotiation reply

Level: (426)

CAUSE: Indicates the number of seconds to wait for a binary negotiation reply from the remote terminal server.

NOTE: Binary negotiation accepted by remote side

Level: (427)

CAUSE: Indicates the successful completion of the binary negotiation.

NOTE: Sent interrupt signal to application

Level: (428)

CAUSE: Indicates the sending of an interrupt to the application.

NOTE: Sent break to application

Level: (429)

CAUSE: Indicates the sending of a break to the application.

NOTE: Pseudonym <pseudonym_name> does not exist

Level: (430)

CAUSE: Indicates the non-existence of the pseudonym specified and its availability for use.

NOTE: Deleted pseudonym <pseudonym_name> to make it available for use

Level: (431)

CAUSE: Indicates the successful deletion of the pseudonym specified and its availability for use.

NOTE: Deleted pseudonym <pseudonym_name>

Level: (432)

CAUSE: Indicates the successful deletion of the pseudonym specified.

NOTE: This message accompanies messages (108) and (297).

NOTE: Closed pty <master_pty_name>

Level: (433)

CAUSE: Indicates the closure of the pty specified after the deletion of its associated pseudonym.

NOTE: Closing connection due to application completion

Level: (434)

CAUSE: Indicates the clean closure of the connection to the remote terminal server after the close timer had expired.

NOTE: Received <telnet_command> <recognized_telnet_option> and <reply_flag>

Level: (435)

NOTE: Received <telnet_command> <unrecognized_telnet_option> and <reply_flag>

Level: (436)

CAUSE: Indicate the reception of a Telnet command and option.

NOTE: Sent <telnet_command> <recognized_telnet_option>

Level: (437)

NOTE: Sent <telnet_command> <unrecognized_telnet_option>

Level: (438)

CAUSE: Indicate the sending of a Telnet command and option.

Informational Messages

Technical documentation

» Table of Contents

» Index