HP 3000 Manuals HP 3000 Manuals
COMMUNICATOR 3000/XL
Printed in U.S.A.
900 Series HP 3000 Computers
HP Part No. 30216-90004
Edition R2805
Printed Jan 1988
The information contained in this document is subject to change without
notice.
HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard
shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance or
use of this material.
Hewlett-Packard assumes no responsibility for the use or reliability of
its software on equipment that is not furnished by Hewlett-Packard.
This document contains proprietary information which is protected by
copyright. All rights are reserved. No part of this document may be
photocopied,reproduced or translated to another language without the
prior written consent of Hewlett-Packard Company.
Æ 1988 by HEWLETT-PACKARD COMPANY
Conventions
NOTATION | DESCRIPTION
UPPERCASE | Within syntax statements, characters in
| uppercase must be entered in exactly the order
| shown, though you can enter them in either
| uppercase or lowercase. For example:
|
| SHOWJOB
| Valid entries: showjob ShowJob SHOWJOB
| Invalid entries: shojwob ShoJob SHOW_JOB
italics | Within syntax statements, a word in italics
| represents a formal parameter or argument that
| you must replace with an actual value. In the
| following example, you must replace filename
| with the name of the file you want to release:
|
|
| RELEASE filename
punctuation | Within syntax statements, punctuation
| characters (other than brackets, braces,
| vertical parallel lines, and ellipses) must be
| entered exactly as shown.
{ } |
| Within syntax statements, braces enclose
|
| required elements. When several elements
|
| within braces are stacked, you must select
|
| one. In the following example, you must
|
| { ON }
| select ON or OFF: SETMSG { OFF}
[ ] | Within syntax statements, brackets enclose
| optional elements. In the following example,
| brackets around ,TEMP indicate that the
| parameter and its delimiter are optional:
|
| PURGE {filename} [,TEMP]
|
| When several elements with brackets are
|
| stacked, you can select any one of the
|
| elements or none. In the following example,
|
| you can select devicename or deviceclass or
|
| [ devicename ]
| neither: SHOWDEV [ deviceclass]
NOTATION | DESCRIPTION
[...] | Within syntax statements, a horizontal
| ellipsis enclosed in brackets indicates that
| you can repeatedly select elements that appear
| within the immediately preceding pair of
| brackets or braces. In the following example,
| you can select itemname and its delimiter zero
| or more times. Each instance of itemname must
| be preceded by a comma:
|
| [,itemname][...]
| If a punctuation character precedes the
| ellipsis, you must use that character as a
| delimiter to separate repeated elements.
| However, if you select only one element, the
| delimiter is not required. In the following
| example, the comma cannot precede the first
| instance of itemname:
|
| [itemname][,...]
|...|
| Within syntax statements, a horizontal
|
| ellipsis enclosed in parallel vertical lines
|
| indicates that you can select more than one
|
| element that appears within the immediately
|
| preceding pair of brackets or braces.
|
| However, each element can be selected only one
|
| time. In the following example, you must
|
| select ,A or ,B or ,A,B or ,B,A : { ,A}|...|
| { ,B}
|
| If a punctuation character precedes the
|
| ellipsis, you must use that character as a
|
| delimiter to separate repeated elements.
|
| However, if you select only one element, the
|
| delimiter is not required. In the following
|
| example, you must select A or B or AB or BA.
|
| The first element cannot be preceded by a
|
| { A}
| comma: { B}|,...|
... | Within examples, horizontal or vertical
| ellipses indicate where portions of the
| example are omitted.
Å | Within syntax statements, the space symbol Å
| shows a required blank. In the following
| example, you must separate modifier and
| variable with a blank:
|
| SET[(modifier)]Å(variable);
| When necessary for clarity in an example, user
underlining | input may be underlined. For example:
|
| NEW NAME? ALPHA
| In addition, brackets, braces or ellipses
| appearing in syntax or format statements which
| must be entered as shown will be underlined.
| For example:
|
| LET var[[subscript]] = value
shading | Within an example of interactive dialog,
| shaded characters indicate user input or
| responses to prompts. In the following
| example, OMEGA is the user's response to the
| NEW NAME prompt:
|
| NEW NAME? OMEGA
NOTATION | DESCRIPTION
[[ ]] | The symbol [[ ]] indicates a key on the
| terminal's keyboard. For example, [[CTRL]]
| indicates the Control key.
[[CTRL]] char | [[CTRL]] char indicates a control character.
| For example, [[CTRL]] Y means you have to
| simultaneously press the Control key and the Y
| key on the keyboard.
base prefixes | The prefixes %, #, and $ specify the numerical
| base of the value that follows:
|
| %num specifies an octal number.
| #num specifies a decimal number.
| $num specifies a hexadecimal number.
| When no base is specified, decimal is assumed.
Bit (bit:length) | When a parameter contains more than one piece
| of data within its bit field, the different
| data fields are described in the format Bit
| (bit:length), where bit is the first bit in
| the field and length is the number of
| consecutive bits in the field. For example,
| Bits (13:3) indicates bits 13, 14, and 15:
most significant least significant
|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
| 0| | | | | | | | | | | | |13|14|15|
|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
Bit (0:1) Bits(13:3)