HP 3000 Manuals HP 3000 Manuals
What You Will Need
HP LaserRX/MPE requires a PC in addition to the HP 3000(s) you will be
monitoring. This section describes hardware and software requirements
for the PC.
PC Hardware Requirements
To install and use HP LaserRX/MPE, you must have an original HP Vectra
(classic) PC; an HP Vectra ES, QS, or RS; or an IBM PC AT.
You may not use an HP Vectra CS or LS.
Your PC must have the following minimum configuration:
* At least 640 Kbytes of memory.
* A compact disc-read only memory (CD-ROM) drive. (See "PC Software
Requirements" regarding the version of CD-ROM extensions that
is required.)
* At least one RS-232 serial data communications port (COM1 or COM2)
through which the PC can be connected to an HP 3000 for basic
serial connections; or a ThinLAN or StarLAN interface if you are
using HP OfficeShare Network or HP Network Services connections.
* A hard disc drive with a recommended minimum of 5 Mbytes of space
available for HP LaserRX/MPE logfiles and up to 2 Mbytes of space
available for HP LaserRX/MPE software.
* An EGA or VGA graphics adapter card and monitor.
* A minimum of 512 Kbytes of expanded memory if you are using HP
OfficeShare Network or HP Network Services software. Performance
of applications under Microsoft(R) Windows 3.0 is extremely
sensitive to available memory. Basically, more memory is better.
Please refer to the section titled "Configuring Your System's
Memory" in the Microsoft Windows 3.0 User's Guide for a detailed
explanation of memory configuration on your PC.
* A mouse.
PC Software Requirements
You must have the following software to use HP LaserRX/MPE.
* MS-DOS(R) PC operating system, version 3.1 or later.
* Microsoft Windows, version 3.0 or later.
* Microsoft Windows 3.0 compatible CD-ROM extensions, version 2.20
or later. Version 2.20 of these extensions is provided on the HP
LaserRX/MPE CD. Instructions on how to install version 2.20
extensions are included in the HP LaserRX/MPE installation and
update procedures.
* HP OfficeShare Network or HP Network Services software and binary
file transfer capability if you are using HP LaserRX/MPE directly
over a local area network (LAN).
* A terminal emulator.