HP 3000 Manuals HP 3000 Manuals
Starting FTP Monitor
To start the FTP server monitor process, stream the job JFTPSTRT provided
with the FTP product.
Use the sample job file as a model to modify for your installation. For
example, if you have a separate job to start the links and network
services, you can add the :stream JFTPSTRT.ARPA.SYS statement to your job
to automatically start the FTP monitor process.
Figure 3-1 is a printout of the included job file.
The RPM network service must be started before the FTP monitor process is
run (see the statement NSCONTROL start=RPM,RPML in the sample job). The
RPM service is provided with the FTP product.
Providing Access to the FTP Server Only
For security reasons, you can prevent MPE/iX users from running the FTP
user program by locking the file named FTP.ARPA.SYS with the MPE/iX
command ALTSEC.
Providing Access to the MPE/iX FTP User Only
To prevent remote users from accessing the MPE/iX FTP server, do not
start or run the FTP monitor process.
Stopping the FTP Server
To stop the FTP monitor, issue the command, ABORTJOB FTP.SYS.
______________________________________________________________________________
| |
| !JOB ftpmon,ftp/ftppass.sys/syspass,arpa |
| ! |
| !COMMENT The user FTP.SYS is used so it is easier to |
| !COMMENT manage the FTP monitor. This jobstream should |
| !COMMENT be the only time FTP.SYS is used. |
| ! |
| !COMMENT To see if the monitor is running type: SHOWJOB JOB=FTP.SYS |
| !COMMENT To stop the FTP monitor type: ABORTJOB FTP.SYS |
| ! |
| !COMMENT If the FTP monitor aborts prematurely examine the output |
| !COMMENT file for this job stream to find the cause. |
| ! |
| !COMMENT make sure that RPM is started |
| !COMMENT if it has already been started then we should get a |
| !COMMENT dserror 652 |
| ! |
| !continue |
| !nscontrol start=RPM,RPML |
| ! |
| !setvar dserror=0 |
| !if (!dserror <> 0) and (!dserror <> 652) then |
| ! tellop Error starting FTP MONITOR. NSCONTROL command error #!dserror|
| ! exit |
| !endif |
| ! |
| ! COMMENT create the log file if it doesn't already exist |
| ! continue |
| ! build ftplog.arpa.sys;rec=-256,,f,ascii;disc=4096 |
| ! continue |
| ! altsec ftplog.arpa.sys; (A,R,W:ANY) |
| ! |
| !comment start up the FTP monitor |
| ! |
| !tellop FTP MONITOR is starting up |
| ! |
| !comment FTPMON will exit when the network comes down |
| !run ftpmon |
| ! |
| !tellop FTP MONITOR is shutting down |
| !EOJ |
______________________________________________________________________________
Figure 3-1. FTP Job File JFTPSTRT
Changing Logging
Logging FTPMON errors is started when you stream the JFTPSTRT job as
shown in the sample job file (Figure 3-1).
To stop logging:
1. Stop the monitor process by issuing an ABORTJOB FTP.SYS
2. Purge the FTPLOG.ARPA.SYS file on your system.
3. Edit the JFTPSTRT file (Figure 3-1) by commenting out
the statements to create and alter security on the file
FTPLOG.ARPA.SYS. Save the edited file.
4. Stream the JFTPSTRT job to start FTP.