HP 3000 Manuals HP 3000 Manuals
Dynamic Reconfiguration Dynamic reconfigurationprovides a means for a limited set of configuration valuesto be downloaded to the DTC without the need to impact users by resetting the DTC. Some of the dynamically reconfigurable values are downloaded to and affect the operation of a specific DTC/X.25 Network Access card. Only X.25 values are downloaded when the RC function is used and the RECONF optionis X25. Both X.25 and PAD support values are downloaded when the RECONF option is CARD. Other dynamically reconfigurable values are downloaded to and affect the operation of the DTC itself. These "global" values are downloaded if the RC function is used and the RECONF option is ALL or if no RECONF option is specified (the default). The ALL option downloads values to the specified DTC/ X.25 Network Access card as well. Two other RECONF options, PASS and LOGCL, can also be used when the DTCCNTRL function is RC. These options allow you to modify the PAD access password and the X.25 logging class, respectively. In most cases, X.25 and, if appropriate, PAD services must be active before you use the RC function to download configuration parameters. The exceptions are the PAD access password (RECONF=PASS) and Enable logging class (RECONF=LOGCL), which may be downloaded regardless of whether or not X.25 or PAD services are active.