HP 3000 Manuals HP 3000 Manuals
PXP PM Logging Location Codes
The PXP header is contained in the message frame logged on inbound
packets. The header begins at word 18 of the message frame.
0 CLAS0001 Cause: Received an invalid NS format message (PARM =
message function).
Action: See "Submitting an SR" in appendix A of this
manual.
1 CLAS0001 Cause: Received a port message before receiving the
CP initialization message (PARM = message function).
Action: See "Submitting an SR" in appendix A of this
manual.
2 CLAS0001 Cause: Received an invalid SIP message (PARM =
message function).
Action: See "Submitting an SR" in appendix A of this
manual.
3 CLAS0001 Cause: Received an invalid BFM message (PARM =
message function).
Action: See "Submitting an SR" in appendix A of this
manual.
4 CLAS0001 Cause: Received an invalid NetIPC message (PARM =
message function).
Action: See "Submitting an SR" in appendix A of this
manual.
5 CLAS0001 Cause: Received an invalid message of unknown format
(PARM = message function).
Action: See "Submitting an SR" in appendix A of this
manual.
6 CLAS0005 Cause: A PXP PM has been activated.
Action: See "Submitting an SR" in appendix A of this
manual.
7 CLAS0002 Cause: An error result was returned on an NS'DICT'Add
call. The PXP PM was therefore not started (PARM =
NS'DICT'Add error code).
Action: See "Submitting an SR" in appendix A of this
manual.
9 CLAS0001 Cause: A PXP internal resource error has been
encountered.
Action: See "Submitting an SR" in appendix A of this
manual.
10 CLAS0001 Cause: A PXP internal error has been encountered.
Action: See "Submitting an SR" in appendix A of this
manual.
11 CLAS0001 Cause: A PXP internal resource error has been
encountered.
Action: See "Submitting an SR" in appendix A of this
manual.
12 CLAS0001 Cause: A PXP internal error has been encountered.
Action: See "Submitting an SR" in appendix A of this
manual.
13 CLAS0002 Cause: An error result was returned on an
NMclosetrace call for NetIPC tracing (PARM = NM error
code).
Action: See "Submitting an SR" in appendix A of this
manual.
14 CLAS0003 Cause: An inbound packet has been discarded due to a
checksum error.
Action: Repeated checksum errors indicate a possible
link problem. Refer to the NS3000/iX Operations and
Maintenance Manual.
15 CLAS0003 Cause: An inbound packet was discarded due to a
protocol header violation.
Action: See "Submitting an SR" in appendix A of this
manual.
16 CLAS0003 Cause: An error packet could not be generated due to
pending I/O.
Action: Informative message.
17 CLAS0003 Cause: An inbound packet was discarded due to a
protocol header violation.
Action: See "Submitting an SR" in appendix A of this
manual.
18 CLAS0003 Cause: A PXP request packet has been retransmitted
(PARM = number of retransmissions performed).
Action: Repeated retransmissions suggest possible
link or configuration problems. See PXP error code
explanations.
19 CLAS0003 Cause: PXP request failed. Retransmission-retry
maximum exceeded. Possible link or configuration
problems.
Action: See error 10 in the "Network Transport
Protocol Errors" table of this manual.
33 CLAS0003 Cause: An inbound request packet was discarded due to
a lack of receive resources.
Action: None.
34 CLAS0002 Cause: An inbound request packet was discarded due to
a Path error.
Action: See "Submitting an SR" in appendix A of this
manual.
35 CLAS0003 Cause: A PXP error packet was received.
Action: Informative message.
37 CLAS0001 Cause: A PXP internal resource error has been
encountered.
Action: See "Submitting an SR" in appendix A of this
manual.
38 CLAS0001 Cause: A PXP internal resource error has been
encountered.
Action: See "Submitting an SR" in appendix A of this
manual.
39 CLAS0003 Cause: A duplicate reply has been discarded.
Action: Informative message.
44 CLAS0001 Cause: An error result was returned on a
BFMbufgranted message (PARM = BFM error code).
Action: See "Submitting an SR" in appendix A of this
manual.
46 CLAS0001 Cause: A PXP internal resource error has been
encountered.
Action: See "Submitting an SR" in appendix A of this
manual.
48 CLAS0001 Cause: A PXP internal resource error has been
encountered.
Action: See "Submitting an SR" in appendix A of this
manual.
50 CLAS0003 Cause: An inbound packet was discarded as part of the
shutdown sequence.
Action: Informative message.
53 CLAS0002 Cause: An error result was returned on an
N-Mclosetrace call for NetIPC tracing (PARM = NM error
code).
Action: See "Submitting an SR" in appendix A of this
manual.
54 CLAS0005 Cause: A PXP PM has been deactivated.
Action: Informative message.
55 CLAS0006 Cause: Statistical summary for a deactivated PXP PM.
Action: Statistical information.
56 CLAS0002 Cause: A PXP error packet could not be generated due
to a PATH error.
Action: See "Submitting an SR" in appendix A of this
manual.
59 CLAS0003 Cause: An error result was returned on a PATH'get
call (PARM = PATH error code).
Action: See PATH error explanations listed elsewhere
in this section.
60 CLAS0003 Cause: An error result was returned on a PATH'get
call (PARM = PATH error code).
Action: See PATH error explanations listed elsewhere
in this section.
69 CLAS0001 Cause: An error was returned on an NS'DICT'Delete
call (PARM = error result returned).
Action: See "Submitting an SR" in appendix A of this
manual.
70 CLAS0003 Cause: Adding a PXP PM to the registry failed (PARM =
error result returned by Reg'CM'Entity).
Action: This is only a warning, but submit an SR
anyway. See "Submitting an SR" in appendix A of this
manual.