HP 3000 Manuals HP 3000 Manuals
Path Result Code Table
0 Cause: Path resolved, path descriptor returned.
Action: None. Informative message.
2 Cause: Path was verified path descriptor returned.
Action: None. Informative message.
3 Cause: Path resolution has been deferred.
Action: Wait for reply message on reply port.
5 Cause: Internal resource error.
Action: See "Submitting an SR" in appendix A of this
manual.
6 Cause: Internal error encountered.
Action: See "Submitting an SR" in appendix A of this
manual.
9 Cause: Mapping table entry not found.
Action: See Map Result Code Table.
11 Cause: Destination network not in routing table.
Action: See "Submitting an SR" in appendix A of this
manual.
12 Cause: Not directly connected to network. Network
not started or IP address is incorrect.
Action: Check destination IP address is correct and
that the network is started.
13 Cause: Format error in path report.
Action: See "Submitting an SR" in appendix A of this
manual.
14 Cause: No suitable path reports.
Action: See "Submitting an SR" in appendix A of this
manual.
16 Cause: Bad mapping table sequence number.
Action: See Map Result Code Table.
17 Cause: Mapping table entry has aged.
Action: See Map Result Code Table.
18 Cause: Path is in disconnecting state.
Action: See Map Result Code Table.
19 Cause: Mapping Table is in a bad state.
Action: See Map Result Code Table.