HP 3000 Manuals HP 3000 Manuals
NETIPC Logging Location Codes
0 CLAS0000 Cause: Invalid port message.
Action: Examine "Info" section of log record. See
"Submitting an SR" in appendix A of this manual.
1 CLAS0000 Cause: Internal error. Unable to create port in data
segment table.
Action: See "Submitting an SR" in appendix A of this
manual.
2 CLAS0000 Cause: Internal error. Unable to locate known entry
in the name registry.
Action: See "Submitting an SR" in appendix A of this
manual.
3 CLAS000 Cause: Internal error. Received unsolicited PXP
reply message.
Action: Examine "Info" section of log record. See
"Submitting an SR" in appendix A of this manual.
4 CLAS0000 Cause: Internal error. Buffer Manager error.
Action: Examine "Info" section of log record. See
"Submitting an SR" in appendix A of this manual.
5 CLAS0000 Cause: Internal error. Trace error.
Action: See "Submitting an SR" in appendix A of this
manual.
6 CLAS0000 Cause: Internal error. Socket registry process
reported a socket error.
Action: See "Submitting an SR" in appendix A of this
manual.
7 CLAS0000 Cause: Internal error. Socket registry was unable to
build a socket path report from the node's path
report.
Action: See "Submitting an SR" in appendix A of this
manual.
11 CLAS0000 Cause: Internal error. Unable to send or insert a
port message.
Action: See "Submitting an SR" in appendix A of this
manual.
14 CLAS0000 Cause: Internal. Unable to release timer.
Action: See "Submitting an SR" in appendix A of this
manual.
16 CLAS0000 Cause: Internal error. Unable to create port message
pool.
Action: See "Submitting an SR" in appendix A of this
manual.
17 CLAS0000 Cause: Internal error. Call hpgetsysplabel failed.
Action: See "Submitting an SR" in appendix A of this
manual.
18 CLAS0000 Cause: Internal error. Call to convert_dst failed.
Action: See "Submitting an SR" in appendix A of this
manual.
19 CLAS0000 Cause: Internal error. Unable to alter port subqueue
state.
Action: See "Submitting an SR" in appendix A of this
manual.
20 CLAS0000 Cause: Internal error. Failure in the call to NWTM
procedure.
Action: See "Submitting an SR" in appendix A of this
manual.
21 CLAS0000 Cause: Internal error. Unable to get the pointer to
file system data structure.
Action: See "Submitting an SR" in appendix A of this
manual.
22 CLAS0000 Cause: Internal error. Unable to set timer interval.
Action: See "Submitting an SR" in appendix A of this
manual.
23 CLAS0000 Cause: Internal error. Error in creating LSI.
Action: See "Submitting an SR" in appendix A of this
manual.
24 CLAS0000 Cause: Internal error. Unable to allocate a LSI.
Action: See "Submitting an SR" in appendix A of this
manual.
25 CLAS0000 Cause: Internal error. Unable to allocate socket
record.
Action: See "Submitting an SR" in appendix A of this
manual.
26 CLAS0000 Cause: Internal error. Error in call to dict_find.
Action: See "Submitting an SR" in appendix A of this
manual.
27 CLAS0000 Cause: Internal error. Unable to create socket
record.
Action: This is typically not an error condition. A
total of at least 8000 socket records can be opened
simultaneously on your system. If you do believe that
there are not that many sockets opened then submit an
SR. Otherwise run your application when there are
fewer NETIPC applications active on your system.
30 CLAS0000 Cause: Internal error. Failure in call to IOWAIT.
Action: See "Submitting an SR" in appendix A of this
manual.
32 CLAS0000 Cause: Internal error. Failed to allocate an
address.
Action: See "Submitting an SR" in appendix A of this
manual.
33 CLAS0000 Cause: Protocol module error.
Action: Verify the protocol module is active. See
"Submitting an SR" in appendix A of this manual.
34 CLAS0000 Cause: Internal error. Table Manager error.
Action: See "Submitting an SR" in appendix A of this
manual.
35 CLAS0000 Cause: Internal error. Failure in freezing the
GSXDS. The GSXDS is a data structure internal to the
NETIPC Subsystem.
Action: Check the memory allocation on your system
and see "Submitting an SR" in appendix A of this
manual if an SR is needed.
36 CLAS0000 Cause: Internal error. Failure in creating new
process.
Action: Check the files in NET.SYS to ensure that all
networking programs are installed. For example, make
sure that PT2PNSTN.NET.SYS exists. If files are ok,
then see "Submitting an SR" in appendix A of this
manual to submit an SR.
0 CLAS0001 Cause: Socket name registry full.
Action: Call IPCNAMERASE to open slots in the socket
name registry.
1 CLAS0001 Cause: Socket Give table full.
Action: Call IPCGET to open slots in the socket give
table.
2 CLAS0001 Cause: Port DST table full. The Port DST table is a
data structure internal to the NETIPC subsystem, not
to be confused with MPE DST entries.
Action: Wait until fewer NetIPC applications are
running on your system. Try again.