HP 3000 Manuals

Mapping Table [ NS3000/iX Error Messages Reference Manual ] MPE/iX 5.0 Documentation


NS3000/iX Error Messages Reference Manual

Mapping Table 

1      CLAS0004           Cause:  Mapping table was created (PARM =
                          Pointer to mapping table control block).

                          Action:  None.

2      CLAS0004           Cause:  Mapping table was deleted (PARM =
                          Pointer to mapping table control block).

                          Action:  None.

3      CLAS0002           Cause:  Error trying to obtain an entry from the
                          pool of free mapping table entries (PARM =
                          Status code from new_get_table_entry call).  In
                          most cases, this will mean that there are no
                          free entries remaining.

                          Action:  See "Submitting an SR" in Appendix of
                          this manual.

4      CLAS0002           Cause:  Unable to locate the DIAL entity entry
                          while trying to send a dial request message.

                          Action:  See "Submitting an SR" in Appendix of
                          this manual.

6      CLAS0002           Cause:  Unable to locate the X.25 entity while
                          trying to send a connect request to Phobos.

                          Action:  See Submitting an SR in appendix A of
                          this manual.

7      CLAS0002           Cause:  Unable to locate the Layer 2 Resolve
                          entity while trying to send a connect request to
                          L2Resolve.

                          Action:  See Submitting an SR in appendix A of
                          this manual.

8      CLAS0003           Cause:  IEEE 802.3 or Ethernet address mapping
                          to IP address has changed.  Could be due to
                          hardware change or could indicate possible IP
                          address duplication on the network.

                          Action:  Review configuration of new nodes on
                          the network.

10     CLAS0002           Cause:  Send message to Probe failed trying to
                          get station address mapping for an IP address.

                          Action:  See Submitting an SR in appendix A of
                          this manual.

11     CLAS0002           Cause:  Send message to Probe failed trying to
                          update an aged station address mapping for an IP
                          address.

                          Action:  See Submitting an SR in appendix A of
                          this manual.

12     CLAS0002           Cause:  Send message to ARP failed trying to get
                          station address mapping for an IP address.

                          Action:  See Submitting an SR in appendix A of
                          this manual.

13     CLAS0002           Cause:  Send message to ARP failed trying to
                          update an aged station address mapping for an IP
                          address.

                          Action:  See Submitting an SR in appendix A of
                          this manual.

15     CLAS0002           Cause:  Attempting to put a route on the
                          connected route queue that is already on that
                          queue.

                          Action:  See Submitting an SR in appendix A of
                          this manual.

19     CLAS0002           Cause:  Unable to locate NI entity trying to
                          send a link shutdown message to CP.

                          Action:  See Submitting an SR in appendix A of
                          this manual.



MPE/iX 5.0 Documentation