HP 3000 Manuals HP 3000 Manuals
IPU Logging Location Codes
1 CLAS0002 Cause: Received a port message containing an invalid
format code or an invalid function code (PARM =
complete function code).
Action: See "Submitting an SR" in appendix A of this
manual.
3 CLAS0004 Cause: Log port initiation.
Action: Informative.
10 CLAS0002 Cause: Encountered a buffer manager failure
attempting to read the address alias list from the
buffer passed in a DCN Start message (PARM = READBUF
result code).
Action: See "Submitting an SR" in appendix A of this
manual.
11 CLAS0002 Cause: Encountered a buffer manager error attempting
to return the buffer passed in a DCN Start message
(PARM = FREEBUF result code).
Action: See "Submitting an SR" in appendix A of this
manual.
12 CLAS0002 Cause: There is not enough room for an entry in the
DCN Table for the network started in a DCN Start
message. Space is allocated based on the maximum
number of directly connected networks (DCNs).
Action: Shut down the transport (NETCONTROL STOP).
Check the configuration file for a disparity between
networks configured and maximum DCNs specified.
13 CLAS0002 Cause: Encountered a buffer manager error attempting
to get the length of the buffer passed in a DCN Start
message (PARM = BUFFERINFO result code).
Action: See "Submitting an SR" in appendix A of this
manual.
14 CLAS0002 Cause: The length of the address alias list passed in
a DCN Start message exceeds the space allocated for
the list in the IPC port DST. The space is allocated
based on the maximum number of directly connected
networks (DCNs).
Action: Shut down the transport (NETCONTROL STOP).
Check the configuration file for a disparity between
the number of networks configured and maximum networks
specified.
15 CLAS0002 Cause: Network number in a Stop Net message not found
in the DCN table (never started).
Action: Error probably occurred when starting the
network. See error at log location 12 above.
16 CLAS0006 Cause: Log statistics prior to port termination (PARM
unused).
Action: Informative.
18 CLAS0002 Cause: Encountered buffer manager error attempting to
return the buffers on message queues before
terminating the port (PARM = FREEBUF result code).
Action: See "Submitting an SR" in appendix A of this
manual.
19 CLAS0004 Cause: Indicates termination of the IPU port.
Action: Informative message.
20 CLAS0002 Cause: A routing update indicates that a network is
now reachable but there is not enough room in the
distance matrix table to record it (PARM unused).
Action: Reconfigure to increase maximum networks on
the IP Update protocol screen.
25 CLAS0002 Cause: Could not process a network shutdown routing
update because gateway in the routing update could not
be found in the distance matrix table (PARM unused).
Action: Should not happen normally. Probable cause
is an inability to process a network start routing
update (because of lack of table space) that would
have put the gateway into the distance matrix.
27 CLAS0002 Cause: Could not process a network routing update
because there was not enough room in an internal
gateway index table (PARM unused).
Action: See "Submitting an SR" in appendix A of this
manual.
28 CLAS0002 Cause: Could not process a network start routing
update because there was not enough room in the
distance matrix table (PARM unused).
Action: See "Submitting an SR" in appendix A of this
manual.
29 CLAS0002 Cause: Could not process a network start routing
update because the count of networks in the routing
update exceeded configured maximum networks.
Action: See "Submitting an SR" in appendix A of this
manual.
30 CLAS0002 Cause: Encountered an internal error attempting to
return a routing update buffer (PARM = BFMFREEBUF
result code).
Action: See "Submitting an SR" in appendix A of this
manual.
41 CLAS0002 Cause: IPU Port Initialization unsuccessful (PARM =
Semaphore Initialization result or result code trying
to add IPU to Registry).
Action: See "Submitting an SR" in appendix A of this
manual.
42 CLAS0002 Cause: Failure to lock IPU routing table.
Action: See "Submitting an SR" in appendix A of this
manual.