HP 3000 Manuals HP 3000 Manuals
Chapter 1 Network Configuration Overview This manual provides step-by-step instructions you can use to configure an HP 3000 node for network communications. You can use the information to configure an IEEE802.3/Ethernet, token ring, FDDI, point-to-point (router), or X.25 node. Before you begin configuration, you must ensure your network is physically set up and ready for network configuration. This chapter provides information you should know before you begin configuration. It tells you what preparations you must make and what items you will be configuring. This chapter contains the following configuration information: * Pre-configuration hardware check. * Pre-configuration software check. * Configuration process overview.