HP 3000 Manuals HP 3000 Manuals
Chapter 53 HPIB Adapter Manager
(Subsystem 116)
--------------------------------------------------------------
---------------------------------------------------------------
1 MESSAGE The READ transaction was terminated by END or
IDENTIFY (EOI) with an even number of bytes
transferred.
---------------------------------------------------------------
2 MESSAGE The READ transaction was terminated by END or
IDENTIFY (EOI) with an odd number of bytes
transferred.
---------------------------------------------------------------
3 MESSAGE The READ transaction was terminated by COUNT; the
COUNT was even.
---------------------------------------------------------------
4 MESSAGE The READ transaction was terminated by COUNT; the
COUNT was odd.
---------------------------------------------------------------
5 MESSAGE The READ transaction was terminated by LINE-FEED;
the COUNT was even.
---------------------------------------------------------------
6 MESSAGE The READ transaction was terminated by LINE-FEED;
the COUNT was odd.
---------------------------------------------------------------
7 MESSAGE The READ transaction was terminated by SECONDARY
ADDRESS; the COUNT was even.
---------------------------------------------------------------
8 MESSAGE The READ transaction was terminated by the
SECONDARY ADDRESS; the COUNT was odd.
---------------------------------------------------------------
9 MESSAGE The transaction was terminated by the host; the
data transfer to host was terminated by Channel END
(CEND) instead of Device END (DEND).
---------------------------------------------------------------
10 MESSAGE The HPIB DAM has detected a time-out when
identifying a device.
---------------------------------------------------------------
129 MESSAGE The HPIB DAM has received an unknown TSTATUS.
---------------------------------------------------------------
137 MESSAGE The HPIB DAM has detected an error in its
internal REQ_INFO_ENTRY; an entry is currently in
use.
---------------------------------------------------------------
138 MESSAGE The HPIB DAM has detected an error in its
internal REQ_INFO entry; an incorrect user ID is
detected.
---------------------------------------------------------------
139 MESSAGE The HPIB DAM has detected an error in its
internal RS_BLOCK; an incorrect use of
RS_BLOCK_PTR.
---------------------------------------------------------------
140 MESSAGE The HPIB DAM has detected an error in its
internal RS_BLOCK; an entry of RS_BLOCK is
currently in use.
---------------------------------------------------------------
141 MESSAGE The HPIB DAM has detected an error in its
internal RS_BLOCK; an entry with incorrect use of
user ID.
---------------------------------------------------------------
142 MESSAGE The HPIB DAM has detected no internal user ID
available.
---------------------------------------------------------------
143 MESSAGE The HPIB DAM has detected its internal REQ_INFO
TABLE integrity error.
---------------------------------------------------------------
144 MESSAGE The HPIB DAM has detected an error in its
internal DM_TABLE; table integrity error.
---------------------------------------------------------------
145 MESSAGE The HPIB DAM has detected an error in its
internal DAM_TABLE; table integrity error.
---------------------------------------------------------------
146 MESSAGE The HPIB DAM has detected internal fatal software
error.
---------------------------------------------------------------
154 MESSAGE The HPIB device adapter has detected a timeout
during a detailed report phase; it can be either in
command, execution, or report phase. The device
adapter also detected a second timeout while trying
to send UNTALK or UNLISTEN commands.
---------------------------------------------------------------
155 MESSAGE The HPIB device adapter has detected a timeout
during a detailed report phase; it can be either in
command, execution, or report phase. The device
adapter is also no longer a CONTROLLER-IN-CHARGE
(CIC).
---------------------------------------------------------------
156 MESSAGE The HPIB device adapter has detected a timeout
during a detailed report; it can occur either in
command, execution, or report phase.
---------------------------------------------------------------
157 MESSAGE The HPIB device adapter has detected a timeout
during a CS80 reporting phase, and it also has
detected a second timeout while trying to send
UNTALK or UNLISTEN commands.
---------------------------------------------------------------
158 MESSAGE The HPIB device adapter has detected a timeout
during a CS80 reporting phase, and it is no longer
a CONTROLLER-IN-CHARGE (CIC).
---------------------------------------------------------------
159 MESSAGE The HPIB device adapter has detected a timeout
during a CS80 reporting phase.
---------------------------------------------------------------
160 MESSAGE The HPIB device adapter has detected a timeout
during a CS80 execution phase, and it has also
detected a second timeout while trying to send
UNTALK or UNLISTEN commands.
---------------------------------------------------------------
161 MESSAGE The HPIB device adapter has detected a timeout
during a CS80 execution phase, and the device
adapter is no longer a CONTROLLER-IN-CHARGE (CIC).
---------------------------------------------------------------
162 MESSAGE The HPIB device adapter has detected a timeout
during a CS80 execution phase.
---------------------------------------------------------------
163 MESSAGE The HPIB device adapter has detected a timeout
during a CS80 command phase, and it has also
detected a second timeout while trying to send
UNTALK or UNLISTEN commands.
---------------------------------------------------------------
164 MESSAGE The HPIB device adapter has detected a timeout
during a CS80 command phase, and it is no longer a
CONTROLLER-IN-CHARGE (CIC).
---------------------------------------------------------------
165 MESSAGE The HPIB device adapter has detected a timeout
during a CS80 command phase.
---------------------------------------------------------------
166 MESSAGE The HPIB device adapter has detected that the
data portion of the CS80 request block was missing
from the request phase.
---------------------------------------------------------------
192 MESSAGE The HPIB device adapter has detected a timeout
during a CS80 execution phase.
---------------------------------------------------------------
205 MESSAGE The HPIB device adapter has been set to a
different block size transferred. The block size
has to be reset first before setting to a desired
value. Other device(s) may be doing the block size
transferred.
---------------------------------------------------------------
206 MESSAGE The HPIB DAM has currently exceeded the maximum
number of the concurrent I/O transactions. It can
only support 8 concurrent I/Os at any one time.
---------------------------------------------------------------
210 MESSAGE The HPIB device adapter has detected that the
DEVICE ADAPTER PROGRAM (DAP) length exceeds its
maximum limit - DAP length greater than 512 bytes
limit.
---------------------------------------------------------------
211 MESSAGE The HPIB device adapter has detected an illegal
DEVICE ADAPTER LANGUAGE (DAL) opcode.
---------------------------------------------------------------
212 MESSAGE The HPIB device adapter has detected a
DEAD-OR-DYING or PROTOCOL error.
---------------------------------------------------------------
213 MESSAGE The HPIB device adapter did not return any
hardware TSTATUS.
---------------------------------------------------------------
214 MESSAGE The HPIB device adapter has failed its internal
self test.
---------------------------------------------------------------
215 MESSAGE The HPIB device adapter has failed to identify as
an Advanced HPIB Device Adapter Interface.
---------------------------------------------------------------
216 MESSAGE The HPIB device adapter failed its internal self
test.
---------------------------------------------------------------
217 MESSAGE The HPIB device adapter function can not be done
because PARALLEL POLL (PPOLL) interrupt is enabled.
It can be returned in response to a setting of
ATTENTION (ATN) FALSE in the transaction.
---------------------------------------------------------------
218 MESSAGE The HPIB device adapter has detected that the
LOOPBACK functional test failed.
---------------------------------------------------------------
219 MESSAGE The HPIB device adapter outbound data is frozen
due to presence of inbound data on the device
adapter; it will not happen when the device adapter
is CONTROLLER-IN-CHARGE (CIC).
---------------------------------------------------------------
220 MESSAGE The HPIB device adapter has detected an INTERFACE
CLEAR (IFC) abort of data transfer.
---------------------------------------------------------------
221 MESSAGE The HPIB device adapter has detected an HPIB
DEVICE CLEAR (DCL).
---------------------------------------------------------------
222 MESSAGE The HPIB transaction requires device adapter to
be either addressed or not CONTROLLER-IN-CHARGE
(CIC). Presently, it is NOT in either case.
---------------------------------------------------------------
223 MESSAGE The HPIB device adapter is CONTROLLER-IN-CHARGE
(CIC) and it should not be.
---------------------------------------------------------------
224 MESSAGE The HPIB device adapter is not
CONTROLLER-IN-CHARGE and it should be.
---------------------------------------------------------------
225 MESSAGE The HPIB device adapter is not configured to be a
SYSTEM CONTROLLER (SC) and it should be.
---------------------------------------------------------------
226 MESSAGE The HPIB device adapter transaction function code
is either NOT implemented or NOT supported.
---------------------------------------------------------------
227 MESSAGE The HPIB device adapter has detected that no
DEVICE ADAPTER PROGRAM (DAP) has been downloaded.
This error is given when an execute downloaded DAP
function is attempted before the DAP has been
previously downloaded.
---------------------------------------------------------------
228 MESSAGE The HPIB current DEVICE ADAPTER PROGRAM (DAP) is
still in use.
---------------------------------------------------------------
229 MESSAGE The HPIB Device Adapter Program (DAP)
has detected a device locked during error
report/recovery.
---------------------------------------------------------------
230 MESSAGE The HPIB device adapter has detected the failure
of the DEVICE ADAPTER PROGRAM (DAP) being
downloaded.
---------------------------------------------------------------
244 MESSAGE The HPIB DAM has detected an ERROR when it tries
to get virtual quads for this I/O request.
---------------------------------------------------------------
245 MESSAGE The HPIB DAM has detected an error when it tries
to get a message frame; IO_GET_FRAME error.
---------------------------------------------------------------
246 MESSAGE The HPIB DAM has run out of its internal software
resources; FATAL internal error.
---------------------------------------------------------------
248 MESSAGE The HPIB DAM has detected an error from the CAM
when checking the I/O pointers.
---------------------------------------------------------------
249 MESSAGE The HPIB DAM has detected an error from the CAM;
CAM has no resources available.
---------------------------------------------------------------
250 MESSAGE The HPIB DAM has detected that the I/O request
has been aborted.
---------------------------------------------------------------
251 MESSAGE The CHANNEL ADAPTER MANAGER has returned an error
in the low level status.
---------------------------------------------------------------
252 MESSAGE The HPIB DAM has detected that the I/O request
has been aborted.
---------------------------------------------------------------
253 MESSAGE The CHANNEL ADAPTER MANAGER has no resources
available.
---------------------------------------------------------------
254 MESSAGE The CHANNEL ADAPTER MANAGER has detected an error
in the I/O request pointers.
---------------------------------------------------------------