HP 3000 Manuals HP 3000 Manuals
Chapter 52 High Level I/O
(Subsystem 111)
--------------------------------------------------------------
---------------------------------------------------------------
1 MESSAGE The I/O request was aborted.
CAUSE Many possible causes.
ACTION This is a warning message and not a standard error
condition. Therefore, no additional action is
required.
---------------------------------------------------------------
2 MESSAGE The I/O request is currently active.
CAUSE Same as message content.
ACTION This is a warning message and not a standard error
condition. Therefore, no additional action is
required.
---------------------------------------------------------------
3 MESSAGE The request is currently queued in the manager's
input queue.
CAUSE Same as message content.
ACTION This is a warning message and not a standard error
condition. Therefore, no additional action is
required.
---------------------------------------------------------------
4 MESSAGE The LDEV specified was invalid.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
5 MESSAGE The LDEV specified was not configured.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
6 MESSAGE A bad virtual address or nil pointer was
specified.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
7 MESSAGE The length specified was negative, or the total
length in the user data chain did not add up to
length.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
8 MESSAGE The sector specified was zero.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
9 MESSAGE The function specified was invalid for this
device.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
10 MESSAGE The message was not found in the input queue.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
11 MESSAGE The subqueue specified is used by the I/O system.
CAUSE Same as for message Content.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
13 MESSAGE The I/O completion port must be ICS-sendable.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
14 MESSAGE The I/O completion port must be able to handle
the largest HLIO message.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
15 MESSAGE The I/O completion port must have 32 subqueues.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
17 MESSAGE The procedure can not be called from the ICS.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
18 MESSAGE The device is in a disabled state, and I/O may
not be performed to it.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
19 MESSAGE The data chain passed to SENDIO had unaligned
data.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
20 MESSAGE The I/O request has generated more than the
maximum of 32 data chains.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
21 MESSAGE The I/O request index supplied was outside the
range of the table.
CAUSE\Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
22 MESSAGE The RENDEZVOUS for the I/O request has already
been done.
CAUSE\Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
24 MESSAGE A message was received by the LDM that was not
understood.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
25 MESSAGE A request to release the device was issued while
the device was still allocated.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
26 MESSAGE A die request was sent to the LDM, but the LDM is
still bound to DM.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
27 MESSAGE A request to release the device was issued while
I/O was still active.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
28 MESSAGE The LDM is bound to a different DM than specified
in the LDM_DO_UNBIND_MSG.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
29 MESSAGE The request failed because we were out of
resources.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
30 MESSAGE The function requested is not implemented.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
31 MESSAGE There are currently no outstanding requests for
the device.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
32 MESSAGE The device class is invalid.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
33 MESSAGE The COMPATIBILITY MODE I/O queue index is
invalid.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
34 MESSAGE There is a flow control problem in the LDM.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
35 MESSAGE There is a flow control problem in the LDM.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
36 MESSAGE The procedure failed to make the user's buffer
present.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
37 MESSAGE The request to abort a MIB chain has found an
already aborted MIB.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------
38 MESSAGE An HLIO internal error was detected.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
---------------------------------------------------------------