HP 3000 Manuals HP 3000 Manuals
(Subsystem 143) (contd)
6033 MESSAGE Storage Managment SIO plimit. (FILE SYSTEM ERROR
-6033)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6034 MESSAGE Storage Managment SIO tape runaway. (FILE SYSTEM
ERROR -6034)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6038 MESSAGE Storage Managment SIO stime. (FILE SYSTEM ERROR
-6038)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6040 MESSAGE Storage Managment SIO end of file. (FILE SYSTEM
ERROR -6040)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6041 MESSAGE Storage Managment SIO end of tape. (FILE SYSTEM
ERROR -6041)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6042 MESSAGE Storage Managment SIO tape error recovery. (FILE
SYSTEM ERROR -6042)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6043 MESSAGE Storage Managment SIO end of line. (FILE SYSTEM
ERROR -6043)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6044 MESSAGE Storage Managment SIO invalid operation. (FILE
SYSTEM ERROR -6044)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6100 MESSAGE Terminal Storage Management read failed. (FILE
SYSTEM ERROR -6100)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6101 MESSAGE Terminal Storage Management write failed. (FILE
SYSTEM ERROR -6101)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6102 MESSAGE Terminal Storage Management start read failed.
(FILE SYSTEM ERROR -6102)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6103 MESSAGE Terminal Storage Management start write failed.
(FILE SYSTEM ERROR -6103)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6104 MESSAGE Terminal Storage Management control function
failed. (FILE SYSTEM ERROR -6104)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6105 MESSAGE Terminal Storage Management broken read
encountered. (FILE SYSTEM ERROR -6105)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6200 MESSAGE Storage Management Native Language I/O dependent
error. (FILE SYSTEM ERROR -6200)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6201 MESSAGE Storage Management Native Language I/O conversion
error. (FILE SYSTEM ERROR -6201)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6202 MESSAGE Storage Management Native Language I/O MEA error.
(FILE SYSTEM ERROR -6202)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6203 MESSAGE Storage Management Native Language I/O judge
error. (FILE SYSTEM ERROR -6203)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6204 MESSAGE Storage Management Native Language I/O
implementation error. (FILE SYSTEM ERROR -6204)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
7001 MESSAGE The generic name translation service could not
get access to CWD information. (FILE SYSTEM ERROR
-7001)
CAUSE The reserved file for CWD has been closed or is
corrupted.
ACTION Abort and restart the process.
---------------------------------------------------------------
7002 MESSAGE The generic name translation service found a name
outside a group when it was required to be in a
group. (FILE SYSTEM ERROR -7002)
CAUSE The name was outside of a group.
ACTION Ensure that the name resolves to being in a group.
---------------------------------------------------------------
7003 MESSAGE The generic name translation service could not
find a component of the source name path. (FILE
SYSTEM ERROR -7003)
CAUSE A directory is missing in the source name path.
ACTION Provide a valid name.
---------------------------------------------------------------
7004 MESSAGE The generic name translation service did not have
room in the target array to return the name. (FILE
SYSTEM ERROR -7004)
CAUSE The target array length is not large enough.
ACTION Supply a larger target array.
---------------------------------------------------------------
7005 MESSAGE The generic name translation service found a
remote envorionment or a system file when it was
not allowed. (FILE SYSTEM ERROR -7005)
CAUSE Remote environements and system files cannot be
translated into some syntaxes.
ACTION Remove the remote environment or system file from
the input name.
---------------------------------------------------------------
7006 MESSAGE The generic name translation service found no
source name. (FILE SYSTEM ERROR -7006)
CAUSE A source name to translate was not provided.
ACTION Specify a source name.
---------------------------------------------------------------
7007 MESSAGE The generic name translation service received a
request to translate into an unsupported syntax.
(FILE SYSTEM ERROR -7007)
CAUSE An invalid syntax value was specified as the target
syntax.
ACTION Supply a valid target syntax.
---------------------------------------------------------------
7008 MESSAGE The generic name translation service received a
request to translate into an unknown syntax. (FILE
SYSTEM ERROR -7008)
CAUSE An invalid syntax value was specified as the target
syntax.
ACTION Supply a valid target syntax.
---------------------------------------------------------------
7009 MESSAGE The generic name translation service received a
request to translate a name from an unknown syntax.
(FILE SYSTEM ERROR -7009)
CAUSE An invalid syntax value was specified as the source
syntax.
ACTION Supply a valid source syntax.
---------------------------------------------------------------
7010 MESSAGE The generic name translation service cannot
translate the source name into the desired syntax.
(FILE SYSTEM ERROR 7010)
CAUSE The source name cannot be expressed in the target
syntax.
ACTION Pick a different target syntax.
---------------------------------------------------------------
7011 MESSAGE The generic name translation service cannot parse
the source name. (FILE SYSTEM ERROR -7011)
CAUSE The generic name parsing service found a syntax
error in the name.
ACTION Supply a valid source name.
---------------------------------------------------------------
7012 MESSAGE The generic name translation service was called
with invalid options. (FILE SYSTEM ERROR -7012)
CAUSE The caller passed a bad value in the options
parameter.
ACTION Supply a valid options parameter.
---------------------------------------------------------------
7101 MESSAGE UNABLE TO CREATE FLOD DATA STRUCTURE.
CAUSE An internal file system error occurred.
ACTION Call your HP Support Representative.
---------------------------------------------------------------
7102 MESSAGE UNABLE TO CREATE FLOD DATA STRUCTURE.
CAUSE An internal file system error occurred.
ACTION Call your HP Support Representative.
---------------------------------------------------------------
7103 MESSAGE UNABLE TO ISSUE ANOTHER LOCK REQUEST, LIMIT
REACHED.
CAUSE The maximum number of lock requests for this file
has been reached. No lock requests can be granted
until some locks are released.
ACTION Release unneeded locks.
---------------------------------------------------------------
7104 MESSAGE INTERNAL HPFLOCK ERROR.
CAUSE Internal file system error.
ACTION Call your HP Support Representative.
---------------------------------------------------------------
7105 MESSAGE FILE WAS OPENED WITH DYNAMIC LOCKING, USE FLOCK.
CAUSE HPFLOCK is called on a file which was HPFOPENed
with the dynamic locking option.
ACTION HPFOPEN the file without the dynamic locking
option.
---------------------------------------------------------------
7106 MESSAGE LOCK HELD BY ANOTHER PROCESS, REQUEST DENIED.
CAUSE An attempt was made to lock without the wait option
a record range already locked by another process.
ACTION Retry the request later or use the wait option.
---------------------------------------------------------------
7107 MESSAGE NO FLOD EXISTS, INCOMPATIBLE FILE TYPE.
CAUSE HPFLOCK does not support this file type.
ACTION Use FLOCK instead.
---------------------------------------------------------------
7108 MESSAGE NO SUCH LOCK EXISTS.
CAUSE HPFLOCKINFO, with a command parameter value of 1,
was issued on a lock request which does not exist.
ACTION Assume no such lock exists and continue.
---------------------------------------------------------------
7109 MESSAGE WHENCE PARAMETER OUT OF BOUNDS.
CAUSE A value other than 0, 1, 2, or 3 was passed in for
the whence parameter.
ACTION Pass in a legal value.
---------------------------------------------------------------
7110 MESSAGE LENGTH PARAMETER OUT OF BOUNDS.
CAUSE A negative value was passed for the the length
parameter.
ACTION Pass in a non-negative number.
---------------------------------------------------------------
7111 MESSAGE START PARAMETER OUT OF BOUNDS.
CAUSE The value for the start parameter is beyond the
file limit for the file and is therefore, invalid.
ACTION Determine the file limit via FFILEINFO and
correctly compute the value for the start
parameter.
---------------------------------------------------------------
7112 MESSAGE INTERNAL HPFLOCK ERROR.
CAUSE An internal file system error occurred.
ACTION Call your HP Support Representative.
---------------------------------------------------------------
7113 MESSAGE LOCK EXTENDS BEYOND THE FILE LIMIT.
CAUSE The start, length, and whence parameters combine to
refer to a record beyond the file limit.
ACTION Determine the file limit via FFILEINFO and
correctly compute the values for the start, length,
and whence parameters.
---------------------------------------------------------------
7114 MESSAGE INTERNAL HPFLOCK ERROR, FLOD MARKED INVALID.
CAUSE An internal file system error occurred. To avoid
corruption, all attempts to HPFLOCK or HPFUNLOCK
the file will be denied.
ACTION Close all instances of the file to release all
locks and allow locking on subsequent HPFLOCKs to
occur.
---------------------------------------------------------------
7115 MESSAGE NO GUFD EXISTS, INCOMPATIBLE FILE TYPE.
CAUSE HPFLOCK does not support this file type.
ACTION Use FLOCK instead.
---------------------------------------------------------------
7116 MESSAGE NO GDPD EXISTS, INCOMPATIBLE FILE TYPE.
CAUSE HPFLOCK does not support this file type.
ACTION Use FLOCK instead.
---------------------------------------------------------------
7117 MESSAGE COMMAND PARAMETER OUT OF BOUNDS.
CAUSE A value other than 0 or 1 was passed in for the
command parameter to HPFLOCKINFO.
ACTION Pass in a legal value.
---------------------------------------------------------------
7118 MESSAGE LOCK PARAMETER OUT OF BOUNDS.
CAUSE A value other than 0, 1, 2, 3, or 4 was passed in
for the lock parameter to HPFLOCK.
ACTION Pass in a legal value.
---------------------------------------------------------------
7119 MESSAGE PIN PARAMETER OUT OF BOUNDS.
CAUSE An invalid value was passed in the pin parameter to
HPFLOCKINFO.
ACTION Pass in a legal value.
---------------------------------------------------------------
7120 MESSAGE INTERRUPT OCCURED WHILE WAITING FOR LOCK.
CAUSE The process was aborted or an interrupt occurred
while waiting for the lock request. The request
was denied.
ACTION Retry the operation.
---------------------------------------------------------------
7123 MESSAGE SIZE PARAMETER OUT OF BOUNDS.
CAUSE An invalid value was passed in for the size
parameter to HPFLOCKINFO.
ACTION Pass in a positive value.
---------------------------------------------------------------
7124 MESSAGE INVALID FILE TYPE.
CAUSE HPFLOCK does not support this file type.
ACTION Use FLOCK instead.
---------------------------------------------------------------
7125 MESSAGE LOCK TYPE AND FILE ACCESS INCOMPATIBLE.
CAUSE A request for a read lock was made on a file not
opened with read access or a request for a write
lock was made on a file not opened with write
access.
ACTION HPFOPEN the file with the appropriate access.
---------------------------------------------------------------
7126 MESSAGE CONFLICTING READ FORMAT.
CAUSE The HPFLOCK request has been denied because another
lock request has been granted by a process which
has the file opened with a different read format.
ACTION Retry the operation later, or reopen the file a
different read format and retry the operation.
---------------------------------------------------------------