HP 3000 Manuals HP 3000 Manuals
(Subsystem 143) (contd.)
1507 MESSAGE A tape IO request failed because the device is
not available for access.
CAUSE The specified device is not a valid one, or the
device is disabled or unconfigured.
ACTION Check for the accessibility of the device being
accessed.
---------------------------------------------------------------
1508 MESSAGE An internal error occured while processing a tape
IO request.
CAUSE An unexpected trap occur due to a file system
internal error.
ACTION Contact Hewlett-Packard for support.
---------------------------------------------------------------
1509 MESSAGE A bounds violation error was detected while
processing a tape IO request.
CAUSE The address/parameter passed was inaccessible to
the caller.
ACTION Pass only addresses in accessible spaces.
---------------------------------------------------------------
5000 MESSAGE A keyword < 0 or > VINFO_MAX_KEYWORD, or = 1 was
specified; such keyword numbers are not currently
supported.
---------------------------------------------------------------
5001 MESSAGE The keyvalue for the output buffer type is
outside of the allowable range of
VINFO_OUTPUT_MIN_PARM to VINFO_OUTPUT_MAX_PARM.
---------------------------------------------------------------
5002 MESSAGE The output buffer keyvalue pointed to an invalid
range of memory for the user, or wasn't at least 4
bytes large.
---------------------------------------------------------------
5003 MESSAGE The keyvalue for the volume range is outside of
the allowed range of VINFO_RANGE_MIN_PARM to
VINFO_RANGE_MAX_PARM.
---------------------------------------------------------------
5004 MESSAGE The keyvalue parameter pointed to an invalid
section of memory.
---------------------------------------------------------------
5005 MESSAGE The volume name contains invalid characters, or
the delimiter wasn't found within the allowed
number of characters.
---------------------------------------------------------------
5006 MESSAGE The volume class name contained some invalid
characters, or the delimiter was not found within
the allowed number of characters.
---------------------------------------------------------------
5007 MESSAGE The volume set name contained some invalid
characters, or the delimiter was not found within
the allowed number of characters.
---------------------------------------------------------------
5008 MESSAGE The specified generation index number was outside
of the range -1..32767.
---------------------------------------------------------------
5009 MESSAGE No volumes were found in the specified range with
the requested volume set, class, volume names, and
the generation index.
---------------------------------------------------------------
5010 MESSAGE A keyword was specified two or more times in the
intrinsic call. The latest keyword's keyvalue was
used, and the previous keyvalues were ignored.
---------------------------------------------------------------
5011 MESSAGE The keyword VINFO_OPTION_END_OF_LIST (0) was
specified with some keywords following it in the
intrinsic call; the extra parameters were ignored.
---------------------------------------------------------------
5012 MESSAGE Neither the output buffer, nor the number of
volumes in range output PARM were specified in the
intrinsic call.
---------------------------------------------------------------
5013 MESSAGE The user tried to access a volume set other than
his logon group's home volume set. Such access is
allowed only to those with SM, OP, or CV
capability.
---------------------------------------------------------------
5014 MESSAGE A volume range of one volume class was specified,
but the volume class name was not specified.
---------------------------------------------------------------
5015 MESSAGE A particular volume within a given volume class
was desired, and the range was set to one volume.
The volume class name was given, but the particular
volume name was not given.
---------------------------------------------------------------
5016 MESSAGE The user's output buffer was too small to hold
all of the requested data. If the number of
volumes in range parameter was specified, then the
number of volumes that were actually accessed are
negative.
---------------------------------------------------------------
5017 MESSAGE An error occurred during an I/O in some layer
under Directory Services during a DIRECFIND.
---------------------------------------------------------------
5018 MESSAGE A failure occurred during a switch between CM and
NM, or vice versa. This failure occurred somewhere
within Directory Services.
---------------------------------------------------------------
5019 MESSAGE Either no GUFD/PLFD was found for the user's
logon account directory, or the logon group's group
entry was not found in the account directory.
---------------------------------------------------------------
5020 MESSAGE This error should be impossible to return. If it
is returned, then some unexpected error was
returned in a DIRECFIND. The exact MPE/iX error
number may be found on the error stack.
---------------------------------------------------------------
5021 MESSAGE The volume class name was specified as an output
parameter when volume searching was determined to
be by volume sets; not by volume classes.
---------------------------------------------------------------
5022 MESSAGE The status parameter was pointing to an invalid
section of memory.
---------------------------------------------------------------
5023 MESSAGE The volume range and volume names specification
conflict. Some of the VNAMES were not needed
compared to the range; therefore, the extra names
were ignored.
---------------------------------------------------------------
5024 MESSAGE The KEYVAlue parameter used to specify the
desired units was outside of the range
VINFO_UNITS_MIN_PARM to VINFO_UNITS_MAX_PARM.
---------------------------------------------------------------
5100 MESSAGE HPVLMINFO is reserving error numbers 5000 to
5100.
---------------------------------------------------------------
5101 MESSAGE The PROCESS LOCAL FILE DESCRIPTOR TABLE is full.
---------------------------------------------------------------
5102 MESSAGE The file number does not reside in the PLFD
TABLE.
---------------------------------------------------------------
5103 MESSAGE The file number specified is not within the range
of possible open files.
---------------------------------------------------------------
6000 MESSAGE Storage Management SIO is not ready. (FILE
SYSTEM ERROR -6000)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6001 MESSAGE Storage Management SIO undefined function. (FILE
SYSTEM ERROR -6001)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6002 MESSAGE Storage Management SIO other function. (FILE
SYSTEM ERROR -6002)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6003 MESSAGE Storage Management SIO count is too big. (FILE
SYSTEM ERROR -6003)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6004 MESSAGE Storage Management SIO count is insufficient.
(FILE SYSTEM ERROR -6004)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6008 MESSAGE Storage Management SIO checksum error occurred.
(FILE SYSTEM ERROR -6008)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6009 MESSAGE Storage Management SIO invalid form. (FILE
SYSTEM ERROR -6009)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6010 MESSAGE Storage Management SIO parity error. (FILE
SYSTEM ERROR -6010)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6011 MESSAGE Storage Managment SIO bad access. (FILE SYSTEM
ERROR -6011)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6012 MESSAGE Storage Managment SIO bad item. (FILE SYSTEM
ERROR -6012)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6014 MESSAGE Storage Managment SIO unit is off. (FILE SYSTEM
ERROR -6014)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6015 MESSAGE Storage Managment SIO deleted record. (FILE
SYSTEM ERROR -6015
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6016 MESSAGE Storage Managment SIO no spare available. (FILE
SYSTEM ERROR -6016)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6017 MESSAGE Storage Managment SIO blank media. (FILE SYSTEM
ERROR -6017)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6018 MESSAGE Storage Managment SIO paper tape error. (FILE
SYSTEM ERROR -6018)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6019 MESSAGE Storage Managment SIO system error. (FILE SYSTEM
ERROR -6019)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6020 MESSAGE Storage Managment SIO tape error. (FILE SYSTEM
ERROR -6020)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6021 MESSAGE Storage Managment SIO invalid disk address.
(FILE SYSTEM ERROR -6021)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6023 MESSAGE Storage Managment SIO start I/O failure. (FILE
SYSTEM ERROR -6023)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6024 MESSAGE Storage Managment SIO timer error. (FILE SYSTEM
ERROR -6024)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6027 MESSAGE Storage Managment SIO vertical form control
reset. (FILE SYSTEM ERROR -6027)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6028 MESSAGE Storage Managment SIO beginning of tape. (FILE
SYSTEM ERROR -6028)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6030 MESSAGE Storage Managment SIO broken read. (FILE SYSTEM
ERROR -6030)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6031 MESSAGE Storage Managment SIO timer overflow. (FILE
SYSTEM ERROR -6031)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------
6032 MESSAGE Storage Managment SIO bad escape. (FILE SYSTEM
ERROR -6032)
CAUSE A storage management error was detected.
ACTION Ensure the device is operating properly.
---------------------------------------------------------------