HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd.)
3350 MESSAGE FILE NAME CONTAINS EMBEDDED NON-ALPHANUMERIC
CHARACTERS. WELCOME MESSAGE REMAINS UNCHANGED.
(CIERR 3350)
CAUSE The WELCOME message file name contains a character
that is not recognized by the command interpreter.
ACTION Use a valid file name for the WELCOME message file.
---------------------------------------------------------------
3351 MESSAGE EMBEDDED NON-ALPHANUMERIC CHARACTERS IN LOCKWORD.
WELCOME MESSAGE REMAINS UNCHANGED. (CIERR 3351)
CAUSE The lockword entered to access the WELCOME message
file contains a character that is not recognized by
the CI.
ACTION Use a valid file name, with the appropriate
lockword, for the WELCOME message file.
---------------------------------------------------------------
3352 MESSAGE EMBEDDED NON-ALPHANUMERIC CHARACTERS IN GROUP
NAME. WELCOME MESSAGE REMAINS UNCHANGED. (CIERR
3352)
CAUSE The group name used to access the WELCOME message
file contains a character that is not recognized by
the CI.
ACTION Use a valid file name, with the appropriate group
name, for the WELCOME message file.
---------------------------------------------------------------
3353 MESSAGE EMBEDDED NON-ALPHANUMERIC CHARACTER IN ACCOUNT
NAME. WELCOME MESSAGE REMAINS UNCHANGED. (CIERR
3353)
CAUSE The account name used to access the WELCOME message
file contains a character that is not recognized by
the command interpreter.
ACTION Reenter the account name correctly.
---------------------------------------------------------------
3354 MESSAGE FILE NAME GREATER THAN 8 CHARACTERS LONG. WELCOME
MESSAGE REMAINS UNCHANGED. (CIERR 3354)
CAUSE The WELCOME message file name entered contains
extraneous characters.
ACTION Correctly reenter the WELCOME message file name.
---------------------------------------------------------------
3355 MESSAGE LOCK WORD GREATER THAN 8 CHARACTERS LONG. WELCOME
MESSAGE REMAINS UNCHANGED. (CIERR 3355)
CAUSE The lockword entered to access the WELCOME message
file contains extraneous characters.
ACTION Correctly reenter the WELCOME message file name and
lock word.
---------------------------------------------------------------
3356 MESSAGE GROUP NAME GREATER THAN 8 CHARACTERS LONG.
WELCOME MESSAGE REMAINS UNCHANGED. (CIERR 3356)
CAUSE The group name used to access the WELCOME message
file contains extraneous characters.
ACTION Correctly reenter the WELCOME message file name and
group name.
---------------------------------------------------------------
3357 MESSAGE ACCOUNT NAME GREATER THAN 8 CHARACTERS LONG.
WELCOME MESSAGE REMAINS UNCHANGED. (CIERR 3357)
CAUSE The account name used to access the WELCOME message
file contains extraneous characters.
ACTION Correctly reenter the WELCOME message's file name,
group and account names.
---------------------------------------------------------------
3358 MESSAGE FIRST CHARACTER IN FILENAME IS NON-ALPHA. WELCOME
MESSAGE REMAINS UNCHANGED. (CIERR 3358)
CAUSE The first character of the WELCOME message file
name entered is not an alphabetic character.
ACTION Correctly reenter the WELCOME message file name.
---------------------------------------------------------------
3359 MESSAGE FIRST CHARACTER IN LOCKWORD IS NON-ALPHA. WELCOME
MESSAGE REMAINS UNCHANGED. (CIERR 3359)
CAUSE The lock word used to access the WELCOME message
file begins with a character that is not an
alphabetic character.
ACTION Correctly reenter the WELCOME message file name and
lock word.
---------------------------------------------------------------
3360 MESSAGE FIRST CHARACTER IN GROUP IS NON-ALPHA. WELCOME
MESSAGE REMAINS UNCHANGED. (CIERR 3360)
CAUSE The group name used to access the WELCOME message
file begins with a character that is not an
alphabetic character.
ACTION Correctly reenter the WELCOME message file name and
group name.
---------------------------------------------------------------
3361 MESSAGE FIRST CHARACTER IN ACCOUNT NAME IS NON-ALPHA.
WELCOME MESSAGE REMAINS UNCHANGED. (CIERR 3361)
CAUSE The first character in the account name used to
access the WELCOME message file begins with a
character that is not an alphabetic character.
ACTION Correctly reenter the file name, group and account
name.
---------------------------------------------------------------
3362 MESSAGE MORE THAN ONE PARAMETER SPECIFIED. WELCOME
MESSAGE REMAINS UNCHANGED. (CIERR 3362)
CAUSE More than one parameter was specified while using
the WELCOME command to define a welcome message.
ACTION Reenter the command providing only one parameter.
---------------------------------------------------------------
3363 MESSAGE WELCOME FILE MUST BE FIXED RECORD FORMAT. WELCOME
MESSAGE REMAINS UNCHANGED. (CIERR 3363)
CAUSE The WELCOME message file is not in fixed record
format.
ACTION Alter the WELCOME message file so that it is in
fixed record format.
---------------------------------------------------------------
3364 MESSAGE WELCOME FILE MUST BE ASCII. WELCOME MESSAGE
REMAINS UNCHANGED. (CIERR 3364)
CAUSE The WELCOME message file is not in ASCII format.
ACTION Alter the WELCOME message to an ASCII format.
---------------------------------------------------------------
3365 MESSAGE WELCOME FILE RECORD SIZE IS GREATER THAN 80
CHARACTERS. LINES TRUNCATED TO 72 CHARACTERS LONG.
(CIWARN 3365)
CAUSE The length of the WELCOME message's text file lines
exceeds the maximum length that is allowed.
ACTION Alter WELCOME message file so that the length of
each line does not exceed 72 characters.
---------------------------------------------------------------
3366 MESSAGE CAN NOT OPEN WELCOME FILE. WELCOME MESSAGE
REMAINS UNCHANGED. (CIERR 3366)
CAUSE An unrecognized file name has been specified in the
WELCOME command line.
ACTION Make sure you entered the correct file name for the
WELCOME message file. Then reenter the command
line using the correct file name.
---------------------------------------------------------------
3367 MESSAGE CAN NOT READ WELCOME FILE. WELCOME MESSAGE
REMAINS UNCHANGED. (CIERR 3367)
CAUSE The file name specified in the WELCOME message
command line can not be read due to insufficient
file access priviledge.
ACTION Alter file access security.
---------------------------------------------------------------
3368 MESSAGE WELCOME MESSAGE DATA SEGMENT FULL. WELCOME
MESSAGE TRUNCATED. (CIWARN 3368)
CAUSE The space alloted to store WELCOME message text has
been exceeded. Portions of the WELCOME message may
be cut off.
ACTION If you have DS capability, you can provide extra
Data Segments. Otherwise, you'll have to shorten
the message.
---------------------------------------------------------------
3370 MESSAGE EXPECT TWO PARMS - LDEV,{ENABLE/DISABLE}. (CIERR
3370)
CAUSE Two parameters are to be provided; LDEV and
ENABLE/DISABLE.
ACTION Provide both parameters.
---------------------------------------------------------------
3371 MESSAGE THE ONLY VALID DELIMITER BETWEEN PARMS IS A
COMMA. (CIERR 3371)
CAUSE A command line delimiter other than a comma (,) has
been used.
ACTION Use the comma (,) as a delimiter in the command
line.
---------------------------------------------------------------
3372 MESSAGE INVALID NUMERICAL VALUE FOR LDEV. (CIERR 3372)
CAUSE The number given as the LDEV value is not
acceptable.
ACTION Provide the correct LDEV number.
---------------------------------------------------------------
3373 MESSAGE EXPECT ENABLE OR DISABLE. (CIERR 3373)
CAUSE The command syntax requires either ENABLE or
DISABLE to be specified.
ACTION Specify either ENABLE or DISABLE in the command
line syntax.
---------------------------------------------------------------
3374 MESSAGE INVALID DELIMITER. (CIERR 3374)
CAUSE An unrecognized syntax delimiter in the command
line was used.
ACTION Check command syntax and reenter the command.
---------------------------------------------------------------
3375 MESSAGE IO TIMED OUT BEFORE COMPLETING, PLEASE RE-ENTER.
(CIERR 3375)
CAUSE The input/output device's time limit expired before
completion of a given task.
ACTION Reenter task.
---------------------------------------------------------------
3376 MESSAGE SIO FAILURE, PLEASE RE-ENTER COMMAND (CIERR 3376)
CAUSE Start input/output device failure.
ACTION Reenter command.
---------------------------------------------------------------
3377 MESSAGE UNIT FAILURE. (CIERR 3377)
CAUSE Device failure.
ACTION Check device.
---------------------------------------------------------------
3378 MESSAGE CHANNEL FAILURE, PLEASE RE-ENTER COMMAND (CIERR
3378)
CAUSE Device controller board, used to calculate the
logical address of a device, has failed.
ACTION Call your service representative.
---------------------------------------------------------------
3379 MESSAGE DISCRPS IS NOT ENABLED ON THIS DEVICE. (CIERR
3379)
CAUSE The Rotational Position Sensing (RPS) feature on
the specified logical device has not been enabled.
ACTION Use the DISCRPS command to enable the device.
---------------------------------------------------------------
3380 MESSAGE DISCRPS IS ALREADY ENABLED ON THIS DEVICE. (CIERR
3380)
CAUSE The Rotation Position Sensing (RPS) feature on the
specified logical device has already been enabled.
ACTION Logical Device is already enabled; it does not need
to be enabled again.
---------------------------------------------------------------
3381 MESSAGE DISCRPS IS NOT SUPPORTED ON THIS DEVICE. (CIERR
3381)
CAUSE Same as the message.
ACTION Do not use this command for the referenced device.
---------------------------------------------------------------
3382 MESSAGE DISCRPS IS NOT INSTALLED ON THIS DEVICE. (CIERR
3382)
CAUSE Firmware needed to upgrade disk drives has not been
installed on the device referenced.
ACTION Upgrade disk drive.
---------------------------------------------------------------
3383 MESSAGE STREAMS OUTPUT DEVICE MAY NOT BE 0, CHECK SYSTEM
CONFIGURATION. (CIERR 3383)
CAUSE Device number used was 0.
ACTION Correctly reference device number.
---------------------------------------------------------------
3384 MESSAGE STREAMS DEVICE CANNOT BE A DYNAMICALLY CONFIGURED
DEVICE. (CIERR 3384)
CAUSE Device referenced is dynamically configured.
ACTION Do not reference devices that are dynamically
configured.
---------------------------------------------------------------
3385 MESSAGE TIME AND WINDOW SIZE MUST BE SPECIFIED TOGETHER.
(CIERR 3385)
---------------------------------------------------------------
3386 MESSAGE INVALID VALUE FOR TIME-TO-TARGET. (CIERR 3386)
---------------------------------------------------------------
3387 MESSAGE INVALID VALUE FOR WINDOW SIZE. (CIERR 3387)
---------------------------------------------------------------
3388 MESSAGE DISABLE DOES NOT ACCEPT TIME OR WINDOW SIZE,
IGNORED. (CIWARN 3388)
---------------------------------------------------------------
3389 MESSAGE SOFTWARE I/O ERROR. (CIERR 3389)
---------------------------------------------------------------
3400 MESSAGE SYSTEM MONITOR IS ALREADY ENABLED. (CIERR 3400)
CAUSE Device referenced has been enabled.
ACTION User does not need to enable system monitor.
---------------------------------------------------------------
3401 MESSAGE COULD NOT ENABLE MEASIO. (CIERR 3401)
CAUSE Measurement Interface can not be enabled.
ACTION User cannot enable MEASIO.
---------------------------------------------------------------
3402 MESSAGE UNABLE TO GET DATASEG BUFFER FOR SYSTEM MONITOR.
(CIERR 3402)
CAUSE System monitor data segment buffer unable to be
accessed.
ACTION Check data segment table.
---------------------------------------------------------------
3403 MESSAGE SYSTEM MONITOR WAS NOT ENABLED. (CIERR 3403)
CAUSE System monitor has not been enabled.
ACTION Enable system monitor.
---------------------------------------------------------------
3404 MESSAGE TAPE ERROR ENCOUNTERED BY MEASIO. (CIERR 3404)
CAUSE The measurement interface has detected a problem
with the tape.
ACTION Check tape and tape drive.
---------------------------------------------------------------
3405 MESSAGE END OF TAPE ENCOUNTERED BY MEASIO. (CIERR 3405)
CAUSE The end of the tape has been detected.
ACTION Check tape and tape drive.
---------------------------------------------------------------
3406 MESSAGE SYSTEM MONITOR ENABLED. (CIERR 3406)
CAUSE System monitor has been enabled.
ACTION Check system monitor; disable monitor if
appropriate.
---------------------------------------------------------------
3407 MESSAGE UNABLE TO FREEZE MEASIO CODE SEG. (CIERR 3407)
CAUSE The measurement interface code segment was not
frozen into memory.
ACTION Retry command.
---------------------------------------------------------------
3408 MESSAGE UNABLE TO "UNLOADPROC" MEASIO CODE SEG. (CIERR
3408)
CAUSE Measurement interface code segment was unable to
unload requested process.
ACTION Check MEASIO code segment.
---------------------------------------------------------------
3409 MESSAGE UNABLE TO LOAD MIO'INIT. (CIERR 3409)
CAUSE MIO'INIT process is not able to be accessed.
ACTION Check MIO'INIT process.
---------------------------------------------------------------
3410 MESSAGE MEASIO ERROR. (CIERR 3410)
CAUSE Process has encountered an error.
ACTION Check measurement interface code segmenter.
---------------------------------------------------------------
3411 MESSAGE UNABLE TO LOAD MIO'RESET. (CIERR 3411)
CAUSE Program requested cannot be accessed or found.
ACTION Check program.
---------------------------------------------------------------
3412 MESSAGE TAPE CONTROLLER SERVICING OTHER TAPE UNITS.
(CIERR 3412)
CAUSE Device requested can not currently be accessed.
ACTION Retry in a few minutes.
---------------------------------------------------------------
3413 MESSAGE INTERNAL SYSTEM ERROR,CANNOT ENABLE MEASIO.
(CIERR 3413)
CAUSE A problem with the internal system has been
detected.
ACTION Call your service representative.
---------------------------------------------------------------
3414 MESSAGE BAD STATUS RECEIVED FROM MEASIO. (CIERR 3414)
CAUSE Faulty status information has been received from
the measurement interface.
ACTION Call your service representative.
---------------------------------------------------------------
3415 MESSAGE UNABLE TO LOAD "MEASIO" PROGRAM. (CIERR 3415)
CAUSE System unable to locate and load the MEASIO
program.
---------------------------------------------------------------