HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd)
3317 MESSAGE VFC CANNOT EXCEED 127 LINES/FORM. (CIERR 3317)
---------------------------------------------------------------
3318 MESSAGE WARNING: OPERATOR MUST REALIGN TOP OF FORM AFTER
THIS PRINTJOB COMPLETES ON LDEV ! (CIWARN 3318)
---------------------------------------------------------------
3319 MESSAGE VFC DOWNLOAD FAILED ON LDEV !. (CIERR 3319)
---------------------------------------------------------------
3320 MESSAGE THERE ARE NO SYSTEM BUFFERS AVAILABLE FOR
DOWNLOAD. (CIERR 3320)
---------------------------------------------------------------
3321 MESSAGE VFC CANNOT HAVE NEGATIVE LENGTH (CIERR 3321).
---------------------------------------------------------------
3322 MESSAGE EXPECTED EITHER
"VFC,lines/inch,lines/page[,comment]"
OR "MARGIN=start column" OR
"MODE={FEATURE/TRANSPARENT}". (CIERR 3322)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3323 MESSAGE EXPECTED TWO PARAMETERS FOR VFC. (CIERR 3323)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3324 MESSAGE THE "MARGIN" RECORD MUST BE FIRST (OR SECOND IF
"MODE" IS PRESENT) RECORD IN THE VFC FILE. (CIERR
3324)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3325 MESSAGE THE "VFC" RECORD MUST BE THE FIRST FOLLOWING THE
OPTIONAL "MODE" AND "MARGIN" RECORDS IN VFC FILE.
(CIERR 3325)
---------------------------------------------------------------
3326 MESSAGE EXPECTED COMMA DELIMITERS IN THE "VFC" RECORD.
(CIERR 3326)
---------------------------------------------------------------
3327 MESSAGE DOWNLOAD EXPECTS A COMMA AFTER THE DEVICE NUMBER.
(CIERR 3327)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3328 MESSAGE BAD CHARACTER(S) IN VFC CHANNEL DEFINITION LINE.
LEGAL CHARACTERS ARE " ", "0", AND "1". (CIERR
3328)
---------------------------------------------------------------
3329 MESSAGE IMPROPER LINES-PER-INCH SPECIFIED. "6" LPI USED.
(CIWARN 3329)
---------------------------------------------------------------
3330 MESSAGE EXTRA VFC FILE LINE. FURTHER DOWNLOADING
STOPPED. (CIERR 3330)
---------------------------------------------------------------
3331 MESSAGE ONLY THE 2608S LINE PRINTER SUPPORTS "MODE" VFCS.
(CIERR 3331)
---------------------------------------------------------------
3332 MESSAGE TOO MANY PARAMETERS FOR "MODE" RECORD. EXPECTED
EITHER "MODE=FEATURE" OR "MODE=TRANSPARENT".
(CIERR 3332)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3333 MESSAGE THE "MODE" RECORD MUST BE FIRST (OR SECOND IF
"MARGIN" IS PRESENT) RECORD IN THE VFC FILE.
(CIERR 3333)
---------------------------------------------------------------
3334 MESSAGE ONLY AT MOST ONE EACH "MODE", "MARGIN", "VFC"
RECORD ALLOWED IN A VFC FILE. FURTHER DOWNLOADING
STOPPED. (CIERR 3334)
---------------------------------------------------------------
3335 MESSAGE "MODE" AND "MARGIN" RECORDS MUST PRECEDE "VFC"
RECORDS IN THE VFC FILE. (CIERR 3335)
---------------------------------------------------------------
3345 MESSAGE NM ERROR. COULD NOT OPEN CATALOG FILE ! (CIERR
3345)
---------------------------------------------------------------
3346 MESSAGE NM ERROR. FOUND ERROR ! . CAN'T PRINT IT. NO
CATALOG. (CIERR 3346)
---------------------------------------------------------------
3347 MESSAGE NM ERROR. FOUND ERROR ! WITH UNKNOWN SUBSYSTEM
TYPE. (CIERR 3347)
---------------------------------------------------------------
3348 MESSAGE NM ERROR. GENMESSAGE FOR ERROR ! FAILED. (CIERR
3348)
---------------------------------------------------------------