HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd.)
1925 MESSAGE IF'S AND ENDIF'S MUST BE PAIRED WITHIN USER
DEFINED COMMANDS. THE PREVIOUS IF NESTING LEVEL
WILL BE RESTORED. (CIWARN 1925)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1926 MESSAGE CANNOT SETCATALOG TO AN EMPTY FILE. (CIERR 1926)
CAUSE An attempt was made to use the SETCATALOG command
to establish a directory entry for an empty file.
ACTION Reenter the command making sure the file named with
the SETCATALOG command is not empty.
---------------------------------------------------------------
1927 MESSAGE NO USER LEVEL UDCS HAVE BEEN INITIALIZED.
(CIWARN 1927)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1928 MESSAGE NO ACCOUNT LEVEL UDCS HAVE BEEN INITIALIZED.
(CIWARN 1928)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1929 MESSAGE NO SYSTEM LEVEL UDCS HAVE BEEN INITIALIZED.
(CIWARN 1929)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1931 MESSAGE NO USER DEFINED COMMAND CATALOGS IN USE. (CIERR
1931)
CAUSE Same as the message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1933 MESSAGE EXPECTED UDC LIST FILE PARAMETER. (CIWARN 1933)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1934 MESSAGE BACKREFERENCED FILES AND SYSTEM DEFINED FILES ARE
NOT ALLOWED. (CIERR 1934)
CAUSE Same as the message.
ACTION Reissue the SETCATALOG command with the name of a
permanent file.
---------------------------------------------------------------
1935 MESSAGE UNKNOWN KEYWORD. EXPECTED :SETCATALOG SYNTAX IS:
:SETCATALOG [udcfile1 [,udcfile2...]]
[;SYSTEM][;ACCOUNT][;SHOW]
[;APPEND][;DELETE][;RESET]
[;USER=username[.accountname]] (CIERR
1935).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1936 MESSAGE TOO MANY PARAMETERS. MAXIMUM IS !. (CIERR 1936)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1937 MESSAGE SYSTEM MANAGER CAPABILITY IS REQUIRED TO USE THE
"SYSTEM" PARAMETER. (CIERR 1937)
CAUSE User does not have System Manager (SM) capability.
ACTION Ask your system manager to assign SM capability to
your user name.
---------------------------------------------------------------
1938 MESSAGE ACCOUNT MANAGER CAPABILITY IS REQUIRED TO USE THE
"ACCOUNT" PARAMETER. (CIERR 1938)
CAUSE User does not have Account Manager (AM) capability.
ACTION Ask your system manager to assign AM capability to
your user name.
---------------------------------------------------------------
1939 MESSAGE THE "ACCOUNT" AND "SYSTEM" PARAMETERS CANNOT BE
SPECIFIED SIMULTANEOUSLY. (CIERR 1939)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1940 MESSAGE TOO MANY UDC CONTINUATION LINES, 320 CHAR. MAX.
(CIERR 1940)
CAUSE Same as the message.
ACTION Examine the UDC, "unset" the catalog to correct the
UDC, reset the catalog, and reenter the UDC.
---------------------------------------------------------------
1941 MESSAGE EXPECTED ALPHA CHARACTER IN UDC PARAMETER. (CIERR
1941)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1942 MESSAGE TOO MANY UDC PARAMETERS, 16 MAXIMUM. (CIERR 1942)
CAUSE Same as message content.
ACTION Reduce the number of UDC parameters.
---------------------------------------------------------------
1943 MESSAGE EXPECTED DEFAULT FOR UDC PARAMETER. (CIERR 1943)
CAUSE Same as message content.
ACTION The UDC is probably set up with PARM=" " in it.
This means that it has a default value when you
enter the UDC without any value after it.
---------------------------------------------------------------
1944 MESSAGE NO UDC CLOSING QUOTE. (CIERR 1944)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1945 MESSAGE EXPECTED " ", "," OR ";" AS UDC DELIMITER.
(CIERR 1945)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1946 MESSAGE FOUND MORE PARAMETERS THAN IN UDC DEFINITION.
(CIERR 1946)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1947 MESSAGE CAN'T FIND A UDC PARAMETER FOR THIS NAME. (CIERR
1947)
CAUSE You entered a syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1948 MESSAGE REQUIRED UDC PARAMETER IS MISSING. (CIERR 1948)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1949 MESSAGE ASSEMBLED UDC COMMAND IS TOO LONG, 278 CHARS.
MAXIMUM (CIERR 1949)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1950 MESSAGE EXPECTED UDC PARAMETER. (CIERR 1950)
CAUSE A UDC parameter is missing.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1951 MESSAGE UDC COMMAND NAME TOO LONG. UDC COMMAND NAME MUST
BE 1 TO 16 CHARACTERS LONG. UDC'S NOT SET.
(CIERR 1951).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1952 MESSAGE IGNORED EXTRA UDC PARAMETER. (CIWARN 1952)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1953 MESSAGE EXPECTED ALPHA CHARACTER FOR UDC PARAMETER NAME.
(CIERR 1953)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1954 MESSAGE SPECIAL CHARACTER NOT ALLOWED IN UDC PARAMETER
NAME. (CIERR 1954)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1955 MESSAGE PARAMETERS CAN BE USED IN EITHER POSITIONAL OR
KEY- WORDED FORM, BUT NOT BOTH AT ONCE. (CIERR
1955)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1956 MESSAGE UNKNOWN OPTION KEYWORD. THIS OPTION IGNORED.
VALID OPTIONS: HELP/NOHELP, LIST/NOLIST,
BREAK/NOBREAK, LOGON/NOLOGON. (CIWARN 1956)
CAUSE Syntax error.
ACTION None. Information only.
---------------------------------------------------------------
1968 MESSAGE OPTION NOPROGRAM OVER-RIDDEN BY PREVIOUS PROGRAM.
(CIWARN 1968)
---------------------------------------------------------------
1969 MESSAGE OPTION NOPROGRAM OVER-RIDDEN BY PREVIOUS
NOPROGRAM. (CIWARN 1969)
---------------------------------------------------------------
1970 MESSAGE OPTION LIST OVER-RIDDEN BY PREVIOUS NOLIST.
(CIWARN 1970)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1971 MESSAGE OPTION LOGON OVER-RIDDEN BY PREVIOUS NOLOGON.
(CIWARN 1971)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1972 MESSAGE OPTION NOHELP OVER-RIDDEN BY PREVIOUS HELP.
(CIWARN 1972)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1973 MESSAGE OPTION NOBREAK OVER-RIDDEN BY PREVIOUS BREAK.
(CIWARN 1973)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1974 MESSAGE OPTION NOLIST OVER-RIDDEN BY PREVIOUS LIST.
(CIWARN 1974)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1975 MESSAGE OPTION NOLOGON OVER-RIDDEN BY PREVIOUS LOGON.
(CIWARN 1975)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1976 MESSAGE OPTION HELP OVER-RIDDEN BY PREVIOUS NOHELP.
(CIWARN 1976)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1977 MESSAGE OPTION BREAK OVER-RIDDEN BY PREVIOUS NOBREAK.
(CIWARN 1977)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1978 MESSAGE OPTION RECURSION OVER-RIDDEN BY PREVIOUS
RECURSION. (CIWARN 1978)
---------------------------------------------------------------
1979 MESSAGE OPTION RECURSION OVER-RIDDEN BY PREVIOUS
NORECURSION. (CIWARN 1979)
---------------------------------------------------------------
1980 MESSAGE :SETCATALOG EXPECTS AN EQUAL SIGN ("=") AFTER
"USER" KEYWORD (CIERR 1980).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1981 MESSAGE :SETCATALOG EXPECTS A TARGET USER SPECIFICATION
AFTER "USER" KEYWORD OF THE FORM:
username[.accountname]. (CIERR 1981).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1983 MESSAGE NEED "SM" CAPABILITY TO SPECIFY A USER IN A
DIFFERENT ACCOUNT. (CIERR 1983)
CAUSE User does not have System Manager (SM) capability.
ACTION Ask your system manager to assign SM capability to
your user name.
---------------------------------------------------------------
1984 MESSAGE NEED "AM" OR "SM" CAPABILITY TO SPECIFY ANOTHER
USER. (CIERR 1984)
CAUSE User does not have Account Manager (AM) or System
Manager (SM) capabilities.
ACTION Ask your system manager to assign AM or SM
capability to your user name.
---------------------------------------------------------------
1985 MESSAGE CAN'T SPECIFY "USER" WITH EITHER "ACCOUNT" OR
"SYSTEM". (CIERR 1985)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1990 MESSAGE :SHOWCATALOG EXPECTS AN EQUAL SIGN ("=") AFTER
"USER" KEYWORD (CIERR 1990).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1991 MESSAGE :SHOWCATALOG EXPECTS A TARGET USER SPECIFICATION
AFTER "USER" KEYWORD OF THE FORM:
username[.accountname]. (CIERR 1991).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1992 MESSAGE EXPECTED A PERIOD (".") BETWEEN USER AND ACCOUNT
NAMES. (CIERR 1992)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1993 MESSAGE TOO MANY PARAMETERS FOR :SHOWCATALOG. EXTRAS
IGNORED. (CIWARN 1993)
CAUSE Syntax error.
ACTION None. Information only.
---------------------------------------------------------------
1994 MESSAGE COULD NOT OPEN "COMMAND.PUB.SYS" FOR SHOWCATALOG.
(CIERR 1994)
CAUSE Same as the message.
ACTION Check with your system manager for the state of the
file, COMMAND.PUB.SYS.
---------------------------------------------------------------
1995 MESSAGE "SM" CAPABILITY IS NEEDED TO SPECIFY EITHER
ANOTHER ACCOUNT'S USER OR TO SPECIFY SYSTEM-WIDE
UDC'S. (CIERR 1995)
CAUSE User does not have System Manager (SM) capability.
ACTION Ask your system manager to assign SM capability to
your user name.
---------------------------------------------------------------
1996 MESSAGE "AM" CAPABILITY IS NEEDED TO SPECIFY ANOTHER USER
IN YOUR ACCOUNT OR TO SPECIFY ACCOUNT-WIDE UDC'S.
(CIERR 1996)
CAUSE User does not have Account Manager (AM) capability.
ACTION Ask your system manager to assign AM capability to
your user name.
---------------------------------------------------------------
2000 MESSAGE USER CONTAINS SPECIAL CHARACTERS. ALPHA-NUMERIC
CHARACTERS, ONLY, ARE ALLOWED. (CIERR 2000).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2001 MESSAGE USER NAME TOO LONG. MUST BE 1 TO 8 CHARACTERS
LONG. (CIERR 2001).
CAUSE The user name specified exceeded 8 characters.
ACTION Reenter the command making sure the user name
specified is within the range of 1 to 8 characters.
---------------------------------------------------------------