HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd)
1765 MESSAGE CLINE EQUATION NOT FOUND. (CIWARN 1765)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1766 MESSAGE EMBEDDED SPECIAL CHARACTERS FOUND IN NAME.
(CIERR 1766)
CAUSE Same as message content.
ACTION Review syntax for any special characters in the
name. Then reissue the command.
---------------------------------------------------------------
1767 MESSAGE NAME MAY NOT BEGIN WITH NUMERIC CHARACTER.
(CIERR 1767)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command making
sure the name begins with an alphabetic character.
---------------------------------------------------------------
1768 MESSAGE NAME LENGTH LIMITED TO 8 CHARACTERS. (CIERR
1768)
CAUSE The name entered exceeded the maximum length of 8
characters.
ACTION Reenter the command making sure the name specified
does not exceed 8 characters.
---------------------------------------------------------------
1769 MESSAGE EXPECTED EQUAL SIGN (=) AND VALUE HERE. (CIERR
1769)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1770 MESSAGE VALUE OF KEYWORD NOT OPTIONAL. (CIERR 1770)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1771 MESSAGE SYNTAX ERROR IN LINE SPECIFICATION. (CIERR 1771)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1772 MESSAGE INTEGER OUT OF RANGE OR BAD FORMAT. (CIERR 1772)
CAUSE Same as the message.
ACTION Review the command and then reissue it.
---------------------------------------------------------------
1773 MESSAGE INTEGER NOT IN RANGE 0 - 255. (CIERR 1773)
CAUSE The integer specified was less than zero (0) or
greater than 255.
ACTION Reenter the command making sure the integer
specified is within the range of 0 to 255.
---------------------------------------------------------------
1774 MESSAGE EXPECTED A COLON (:) HERE. (CIERR 1774)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1775 MESSAGE EXPECTED ONE OF KEYWORDS FOR CLINE COMMAND.
(CIERR 1775)
CAUSE Syntax error.
ACTION Check the syntax and reenter the CLINE command.
---------------------------------------------------------------
1776 MESSAGE DEVICE NAME MAY NOT BE MORE THAN 8 CHARACTERS
LONG. (CIERR 1776)
CAUSE The device name specified was more than 8
characters in length.
ACTION Reenter the command making sure the device name
specified is less than or equal to 8 characters.
---------------------------------------------------------------
1777 MESSAGE THIS KEYWORD REDUNDANTLY SPECIFIED. (CIERR 1777)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1778 MESSAGE INTEGER NOT IN RANGE 0 - 63. (CIERR 1778)
CAUSE The integer value entered was less than zero (0) or
greater than 63.
ACTION Reenter the command making sure the integer value
specified is within the range of 0 to 63.
---------------------------------------------------------------
1779 MESSAGE INTEGER NOT IN RANGE 0 - 15. (CIERR 1779)
CAUSE The integer value entered was less than zero (0) or
greater than 15.
ACTION Reenter the command making sure the integer value
specified is within the range of 0 to 15.
---------------------------------------------------------------
1780 MESSAGE DRIVER NAME > 8 CHARACTERS LONG. (CIERR 1780)
CAUSE The driver name specified was more than 8
characters long.
ACTION Reenter the command making sure the driver name is
less than or equal to 8 characters.
---------------------------------------------------------------
1781 MESSAGE INTEGER NOT IN RANGE 0 - 127. (CIERR 1781)
CAUSE The integer value entered was less than zero (0) or
greater than 127.
ACTION Reenter the command making sure the integer value
specified is within the range of 0 to 127.
---------------------------------------------------------------
1782 MESSAGE REQUIRES AT LEAST A LINE NAME. (CIERR 1782)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1783 MESSAGE REQUIRES ACTUAL LINE DESIGNATOR. (CIERR 1783)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1784 MESSAGE BACK REFERENCE TYPE LINE SPECIFICATION MAY NOT
HAVE MORE THAN THE LINE NAMES INVOLVED. (CIERR
1784)
CAUSE You entered a syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1785 MESSAGE IF'S AND ELSE'S MUST BE PAIRED WITHIN USER
COMMANDS. (CIERR 1785)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1786 MESSAGE IF'S AND ENDIF'S MUST BE PAIRED WITHIN USER
COMMANDS. (CIERR 1786)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1793 MESSAGE HELP ENCOUNTERED END OF FILE ON INPUT. (CIERR
1793)
CAUSE The HELP catalog is empty.
ACTION Contact the system manager to rebuild the help
catalog.
---------------------------------------------------------------
1800 MESSAGE UNABLE TO OPEN HELP CATALOG - 'CICAT.PUB.SYS'
(HERR 1800)
CAUSE The HELP catalog (CICAT.PUB.SYS) does not exist.
---------------------------------------------------------------
1801 MESSAGE HELP TERMINATED.
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1802 MESSAGE FILE SYSTEM ERROR READING HELP CATALOG,
'CICAT.PUB.SYS'. (CIERR 1802)
CAUSE Same as message content.
ACTION Try again. If the problem persists, call your
system manager.
---------------------------------------------------------------
1803 MESSAGE INVALID HELP CATALOG 'CICAT.PUB.SYS'. NO USER
LABELS. (CIERR 1803)
CAUSE Same as the message.
ACTION Contact your system manager to rebuild the HELP
catalog.
---------------------------------------------------------------
1804 MESSAGE NO HELP DIRECTORY IN HELP CATALOG
'CICAT.PUB.SYS'. (CIERR 1804)
CAUSE Same as the message.
ACTION Contact your system manager to rebuild the HELP
catalog.
---------------------------------------------------------------
1805 MESSAGE FILE SYSTEM ERROR READING USER LABELS IN HELP
CATALOG 'CICAT.PUB.SYS'. (CIERR 1805)
CAUSE Same as the message.
ACTION Contact your system manager to rebuild the HELP
catalog.
---------------------------------------------------------------
1806 MESSAGE COULDN'T OPEN $STDIN FOR HELP. (CIERR 1806)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
1807 MESSAGE FILE SYSTEM ERROR READING $STDIN. (CIERR 1807)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
1808 MESSAGE FILE SYSTEM ERROR ON HELP LIST FILE. (CIERR
1808)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
1815 MESSAGE FWRITE HELP UDC HEADER FAILED (CIERR 1815)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
1816 MESSAGE FWRITE HELP COMMAND LINES FAILED (CIERR 1816)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
1817 MESSAGE WARN NO HELP COMMAND NAME SPECIFIED (CIERR 1817)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
1818 MESSAGE FWRITE UDC HELP LINE FAILED (CIERR 1818)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
1819 MESSAGE IGNORED EXTRA COMMAND FILE PARAMETER (CIWARN
1819)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1901 MESSAGE CANNOT FIND USER-LEVEL LOGON COMMAND. LOGON UDC
NOT EXECUTED. (CIERR 1901)
CAUSE The logon UDC was not found.
ACTION Use SHOWCAT to check USER level UDCs for a logon
UDC. Then use the SETCATALOG command and specify
the UDC file that contains that logon UDC.
---------------------------------------------------------------
1902 MESSAGE CANNOT FIND ACCOUNT-LEVEL LOGON COMMAND. LOGON
UDC NOT EXECUTED. (CIERR 1902)
CAUSE The logon UDC was not found.
ACTION Use SHOWCAT to check USER level UDCs for a logon
UDC. Then use the SETCATALOG command and specify
the UDC file that contains that logon UDC.
---------------------------------------------------------------
1903 MESSAGE CANNOT FIND SYSTEM-LEVEL LOGON COMMAND. LOGON
UDC NOT EXECUTED. (CIERR 1903)
CAUSE The logon UDC was not found.
ACTION Use SHOWCAT to check SYSTEM level UDCs for a logon
UDC. Then use the SETCATALOG command and specify
the UDC file that contains that logon UDC.
---------------------------------------------------------------
1904 MESSAGE THE SYSTEM DIRECTORY INDICATES THAT ! LEVEL UDC'S
EXIST, YET THE UDC FILES CAN'T BE FOUND IN
COMMAND.PUB.SYS. YOU MUST :SETCATALOG AGAIN OR
REPLACE THE OLD COMMAND FILE. (CIWARN 1904)
CAUSE Same as message content.
ACTION Use SETCATALOG again or replace the old command
file.
---------------------------------------------------------------
1905 MESSAGE UDC ENDS WITH "& ". CONTINUATION LINE CAN'T
BE LAST LINE. (CIERR 1905)
CAUSE The last line of the UDC ends with the continuation
character (&).
ACTION Remove the continuation character from the last
line of the UDC.
---------------------------------------------------------------
1906 MESSAGE UDC COMMAND MUST START WITH AN ALPHABETIC
CHARACTER. UDC'S NOT SET. (CIERR 1906).
CAUSE The UDC command does not start with an alphabetic
character.
ACTION Rewrite the UDC making sure the commands begin with
an alphabetic character.
---------------------------------------------------------------
1907 MESSAGE UDC AT NEST LIMIT, COULDN'T EXECUTE COMMAND OR
WOULD STACK OVERFLOW. (CIERR 1907)
CAUSE Same as the message.
ACTION Examine the UDCs in the UDC file for recursive
loops and nesting of UDCs.
---------------------------------------------------------------
1908 MESSAGE COULDN'T GET UDC DATA SEGMENT. (CIERR 1908)
CAUSE Same as the message.
ACTION Log off and then log on again.
---------------------------------------------------------------
1909 MESSAGE UDC DIRECTORY OVERFLOW, TOO MANY COMMANDS.
(CIERR 1909)
CAUSE Same as the message.
ACTION Examine the UDC files and delete any unnecessary
UDCs.
---------------------------------------------------------------
1910 MESSAGE COULDN'T OPEN UDC DIRECTORY FILE
'COMMAND.PUB.SYS'. (CIERR 1910)
CAUSE Same as the message.
ACTION Contact your system manager to examine the file,
COMMAND.PUB.SYS.
---------------------------------------------------------------
1911 MESSAGE COMMAND.PUB.SYS IS FULL, COULDN'T ADD UDC.
(CIERR 1911)
CAUSE Same as message content.
ACTION Contact your system manager to expand
COMMAND.PUB.SYS so that it becomes a larger file.
---------------------------------------------------------------
1912 MESSAGE FLOCK FAILED ON COMMAND.PUB.SYS, COULDN'T CHANGE
UDC. (CIERR 1912)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
1913 MESSAGE UDC FUNLOCK FAILED ON COMMAND.PUB.SYS. (CIERR
1913)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
1914 MESSAGE UDC FREAD FAILED ON COMMAND.PUB.SYS. (CIERR
1914)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
1915 MESSAGE UDC FWRITE FAILED ON COMMAND.PUB.SYS. (CIERR
1915)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
1916 MESSAGE COULDN'T GET UDC FILE LOCKWORD. SETCATALOG
FAILED. (CIERR 1916)
CAUSE Same as the message.
ACTION Reissue the SETCATALOG command using the correct
lockword.
---------------------------------------------------------------
1921 MESSAGE COULDN'T OPEN UDC LIST FILE - !. (CIERR 1921)
CAUSE Same as the message.
ACTION "Unset" the UDCs for that account/user by entering
the SETCATALOG command without specifying a file
name after it. Then reset the UDCs by entering the
SETCATALOG command, followed by the names of the
appropriate UDC file(s).
---------------------------------------------------------------
1922 MESSAGE FWRITE FAILED ON UDC LIST FILE - !. (CIERR 1922)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
1923 MESSAGE COULDN'T OPEN UDC FILE - !. (CIERR 1923)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
1924 MESSAGE FREAD FAILED ON UDC FILE - !. (CIERR 1924)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------