HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd.)
1161 MESSAGE CV CAPABILITY REQUIRED TO USE HOMEVS= PARAMETER.
(CIERR 1161)
CAUSE User does not have Create Volumes (CV) capability.
ACTION Ask your system manager to assign CV capability to
your user name.
---------------------------------------------------------------
1201 MESSAGE PASSWORD LENGTH > 8 CHARACTERS (CIERR 1201)
CAUSE The password specified is longer than 8 characters.
ACTION Reenter the command making sure the password length
is less than or equal to 8 characters.
---------------------------------------------------------------
1202 MESSAGE EXPECTED PASSWORD (CIERR 1202)
CAUSE The password was ommitted.
ACTION Reenter the command making sure the password is
included.
---------------------------------------------------------------
1203 MESSAGE EXPECTED EQUAL (=) SIGN (CIERR 1203)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1204 MESSAGE EXPECTED 'DISC', 'TAPE', 'SDISC', OR 'CTAPE'
(CIERR 1204)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1205 MESSAGE EXPECTED COMMA FOLLOWED BY 'DISC','TAPE','SDISC'
OR 'CTAPE' (CIERR 1205)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1206 MESSAGE NON EXISTENT LOGGING IDENTIFIER. (CIWARN 1206)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1207 MESSAGE DUPLICATE LOGGING IDENTIFIER (CIERR 1207)
CAUSE You made a syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1208 MESSAGE ILLEGAL TAPE FILE NAME (CIERR 1208)
CAUSE The tape file name specified is not valid.
ACTION Reenter the command specifying a valid tape file
name.
---------------------------------------------------------------
1209 MESSAGE LOGGING PROCESS FOR LOGGING IDENTIFIER IS BUSY
(CIWARN 1209)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1210 MESSAGE MAX LOGGING IDENTIFIERS EXCEEDED (CIERR 1210)
CAUSE Same as message content.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1211 MESSAGE ONLY VALID KEYWORDS ARE "LOG", "PASS", "AUTO",
AND "NOAUTO" (CIERR 1211)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1212 MESSAGE COMMAND MUST BE ISSUED BY CREATOR OF IDENTIFIER.
(CIERR 1212)
CAUSE The command was entered by someone other than the
creator of the identifier.
ACTION Log on as the user who was a creator, then reissue
the command.
---------------------------------------------------------------
1213 MESSAGE EXPECTED FILE NAME. (CIERR 1213)
CAUSE A file name was expected but not included in the
command entry.
ACTION Reenter the command making sure the file name is
included.
---------------------------------------------------------------
1215 MESSAGE EXPECTED LOGFILE NAME (CIERR 1215)
CAUSE A logfile name was expected but not included in the
command entry.
ACTION Reenter the command making sure the logfile name is
included.
---------------------------------------------------------------
1216 MESSAGE CHANGELOG ALREADY PENDING FOR LOGID (CIERR 1216)
CAUSE Same as the message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1217 MESSAGE DATA SEGMENT IS ALREADY RELEASED (CIERR 1217)
CAUSE Same as the message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1219 MESSAGE INVALID STATE OF LOG PROCESS FOR CHANGELOG -
PROCESS IS STOPPING, RECOVERING, OR INITIALIZING
(CIERR 1219)
CAUSE Same as the message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1222 MESSAGE ONLY VALID PARAMETER IS "DEV=" (CIERR 1222)
CAUSE A parameter other than DEV= was entered.
ACTION Reenter the command using only DEV= as a parameter.
---------------------------------------------------------------
1223 MESSAGE ERROR PERFORMING CHANGELOG (CIERR 1223)
CAUSE Same as the message.
---------------------------------------------------------------
1225 MESSAGE EXPECTED LOGGING IDENTIFIER NAME (CIERR 1225)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1226 MESSAGE LOGGING IDENTIFIER LENGTH > 8 CHARACTERS (CIERR
1226)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command making
sure the logging identifier length is less than or
equal to eight characters..
---------------------------------------------------------------
1227 MESSAGE NO SPECIAL CHARACTERS ALLOWED HERE (CIERR 1227)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1229 MESSAGE COMMAND HAS ONLY ONE PARAMETER (CIERR 1229)
CAUSE Too many parameters specified.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1230 MESSAGE NO LOGGING PROCESS CURRENTLY RUNNING (CIWARN
1230)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1231 MESSAGE NO LOGGING IDENTIFIERS ASSIGNED (CIWARN 1231)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1232 MESSAGE LOGGING PROCESS NOT CURRENTLY RUNNING. (CIERR
1232)
CAUSE Same as message content.
ACTION None; the message is for information only.
---------------------------------------------------------------
1233 MESSAGE EXPECTED "PASS" KEYWORD (ULOGERR 1233)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1234 MESSAGE ONLY THE CREATOR CAN USE THIS PARAMETER (ULOGMSG
1234)
CAUSE The user is not the creator of the file.
ACTION Log on as the creator of the log file.
---------------------------------------------------------------
1250 MESSAGE LOGFILE MUST RESIDE IN THE LOGON GROUP AND
ACCOUNT (ULOGERR 1250)
CAUSE Same as the message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1251 MESSAGE EXTRANEOUS PARAMETER (CIERR 1251)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1252 MESSAGE THIS KEYWORD ALREADY SPECIFIED (CIERR 1252)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1253 MESSAGE EXPECTED A SEMI-COLON FOR THE DELIMITER. (CIERR
1253)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1254 MESSAGE EXPECTED "," FOLLOWED BY "START","RESTART" OR
"STOP" (CIERR 1254)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1255 MESSAGE EXPECTED ONE OF PASS, CAP, MAXPRI, LOCATTR, HOME,
USERPASS. (CIERR 1255)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1256 MESSAGE EXPECTED ONE OF PASS, FILES, CPU, CONNECT, CAP,
ACCESS, MAXPRI, LOCATTR, ONVS, HOMEVS. (CIERR 1256)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1257 MESSAGE EXPECTED ONE OF PASS, CPU, FILES, CONNECT,
ACCESS, ONVS, HOMEVS. (CIERR 1257)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1258 MESSAGE EXPECTED ONE OF ALT, SPAN, "BLANK". (CIERR 1258)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1259 MESSAGE THIS VERSION OF THE UTILITY IS INCOMPATIBLE WITH
THE CURRENT MPE VERSION ON THIS SYSTEM. (CIERR
1259)
CAUSE Same as message content.
ACTION Notify your system manager.
---------------------------------------------------------------
1300 MESSAGE REMOTE JOBS ARE NOT ALLOWED !. (CIERR 1300)
CAUSE Same as the message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1301 MESSAGE DSLINE CANNOT CONTAIN BOTH OPEN AND CLOSE. (CIERR
1301)
CAUSE You made a syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1302 MESSAGE DSLINE REQUIRES AT LEAST ONE PARAMETER. (CIERR
1302)
CAUSE Syntax error.
ACTION Check the syntax and reenter the DSLINE command.
---------------------------------------------------------------
1303 MESSAGE DSNUMBER SPECIFICATION MUST BE A NUMBER FROM 1
THRU 255. (CIERR 1303)
CAUSE The DSNUMBER specification was less than 1 or
greater than 255.
ACTION Reenter the command making sure the DSNUMBER
specification is between 1 and 255.
---------------------------------------------------------------
1304 MESSAGE DSLINE #L! DOES NOT IDENTIFY AN OPEN DS LINE.
(CIERR 1304)
CAUSE The DSLINE number specified is not an open DS line.
ACTION Reenter the command specifying a valid open DS
line.
---------------------------------------------------------------
1305 MESSAGE EXPECTED LINEBUF, PHNUM, LOCID, REMID, OPEN,
CLOSE, QUIET, COMP, NOCOMP OR EXCLUSIVE. (CIERR
1305)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1306 MESSAGE MULTIPLE USE OF ! IS NOT ALLOWED. (CIERR 1306)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1307 MESSAGE THE SYNTAX FOR ! REQUIRES AN = SIGN FOLLOWED BY
DATA. (CIERR 1307)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1308 MESSAGE PHNUM IS 1 TO 30 DIGITS AND DASHES. (CIERR 1308)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1309 MESSAGE ! LIST CAN CONTAIN ONLY ONE ELEMENT. (CIERR 1309)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1310 MESSAGE THE SPECIFIED LOGICAL DEVICE IS NOT OPEN. (CIERR
1310)
CAUSE The logical device specified is not open.
ACTION Reenter the command making sure the logical device
specified is open.
---------------------------------------------------------------
1311 MESSAGE THE FIRST CHARACTER OF AN ID SEQUENCE MUST BE A "
OR A ( (CIERR 1311)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1312 MESSAGE THE ID SEQUENCE MUST TERMINATE WITH A ). (CIERR
1312)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1313 MESSAGE THE ID SEQUENCE MUST TERMINATE WITH A ". (CIERR
1313)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1314 MESSAGE A NUMERIC ID SEQUENCE ELEMENT MUST BE 1 THRU 255
(OR 377). (CIERR 1314)
CAUSE The numeric id sequence element was not a valid
value.
ACTION Reenter the command making sure the numeric id
sequence is within the range of 1 to 255 or is
equal to 377.
---------------------------------------------------------------
1315 MESSAGE LINEBUF MUST BE A NUMERIC VALUE FROM 304 THRU
4096. (CIERR 1315)
CAUSE The LINEBUF value entered is not within the valid
range of 304 to 4096.
ACTION Reenter the command making sure the LINEBUF value
entered is within the range of 304 to 4096.
---------------------------------------------------------------
1316 MESSAGE UNABLE TO COMPLETE THE REMOTE COMMAND. (CIERR
1316)
CAUSE Same as the message.
ACTION Retry the operation.
---------------------------------------------------------------
1317 MESSAGE NOT A CURRENTLY AVAILABLE DSLINE. (CIERR 1317)
CAUSE The line specified with the DSLINE command is not
available.
ACTION Reenter the DSLINE command making sure that an
available line is specified.
---------------------------------------------------------------
1318 MESSAGE USE OF EXCLUSIVE REQUIRES BOTH ND AND CS
CAPABILITY. (CIERR 1318)
CAUSE User does not have Access to nonsharable I/O
devices (ND) and Create Volumes (CV) capabilities.
ACTION Ask your system manager to assign ND and CV
capabilities to your user name.
---------------------------------------------------------------