HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd)
1050 MESSAGE CAN ONLY RESTORE TAPE OR SERIAL DISC. (CIERR
1050)
CAUSE A media other than tape or serial disk was
specified with the RESTORE command.
ACTION Reenter the command making sure the media specified
is a tape or serial disk.
---------------------------------------------------------------
1051 MESSAGE RESTORE COMMAND LIMITED TO ! PARAMETERS. (CIERR
1051)
CAUSE Too many parameters were specified with the RESTORE
command.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1052 MESSAGE EXPECTED SEMICOLON AFTER TAPE NAME. (CIERR 1052)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1053 MESSAGE UNABLE TO USE FILE "SYSLIST" - FORCED TO
$STDLIST. (CIERR 1053)
CAUSE Same as the message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1054 MESSAGE RESTORE LIMITED TO ! FILESETS OF THE FORM
@.@.ACCOUNT. (CIERR 1054)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1055 MESSAGE LIMITED TO ! FULLY QUALIFIED FILE NAMES. (CIERR
1055)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1056 MESSAGE LIMITED TO ! FILESETS OF THE FORM @.GROUP OR
@.GROUP.ACCT. (CIERR 1056)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1057 MESSAGE EXPECTED EITHER "," OR ";" TO DELIMIT FILE SET
NAMES. (CIERR 1057)
CAUSE A comma (,) or semicolon (;) was not used to
delimit the file set names.
ACTION Reenter the command making sure a comma or
semicolon is used to delimit file set names.
---------------------------------------------------------------
1058 MESSAGE REDUNDANT SPECIFICATION OF "DATE" PARAMETER.
(CIWARN 1058)
CAUSE The DATE parameter was specified more than once.
ACTION None; the message is for information only. The
last occurrance of the DATE parameter was used.
---------------------------------------------------------------
1059 MESSAGE EXPECTED ONE OF "DATE>=" OR "DATE<=". (CIERR
1059)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1060 MESSAGE STORE RECORD SIZE MUST BE A MULTIPLE OF 256 WORDS
AND BE BETWEEN 256 AND !, INCLUSIVE, FOR THIS
DEVICE. (CIERR 1060)
CAUSE The record size specified is invalid.
ACTION Reenter the command making sure the record size
specified is valid.
---------------------------------------------------------------
1061 MESSAGE RESTORE TAPE RECORD SIZE SPECIFIED IS TOO SMALL.
TAPE WAS WRITTEN WITH RECORDS OF SIZE ! WORDS.
(CIERR 1061)
CAUSE Same as message content.
ACTION Reenter command making sure the reecord size
specified is correct.
---------------------------------------------------------------
1062 MESSAGE EXPECTED ONE OF "SHOW", "FILES=", "KEEP", "DEV=",
OR "OLDDATE". (CIERR 1062)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1063 MESSAGE UNABLE TO LOCATE FILE EQUATION FOR TAPE FILE.
(CIERR 1063)
CAUSE A file name was backreferenced with an asterisk
(*), but the FILE equation has not been used.
ACTION Use the FILE command to create a file equation
before attempting tto perform a restore operation.
---------------------------------------------------------------
1064 MESSAGE THE STORE/RESTORE TAPE FILE CANNOT BE A LABELED
TAPE ON A REMOTE TAPE DRIVE. (CIERR 1064)
CAUSE The specified tape is a labeled tape on a remote
drive.
ACTION Do not specify a labeled tape on a remote drive.
---------------------------------------------------------------
1090 MESSAGE STORE ABORTED BECAUSE OF ERROR (CIERR 1090)
CAUSE The specified tape is a labeled tape on a remote
drive.
ACTION Do not specify a labeled tape on a remote drive.
---------------------------------------------------------------
1091 MESSAGE RESTORE ABORTED BECAUSE OF ERROR (CIERR 1091)
CAUSE The specified tape is a labeled tape on a remote
drive.
ACTION Do not specify a labeled tape on a remote drive.
---------------------------------------------------------------
1100 MESSAGE VOLUME SET/CLASS REFERENCE NAME MUST START WITH
ALPHA (CIERR 1100)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1101 MESSAGE VOLUME SET/CLASS REFERENCE NAME CONTAINS SPECIAL
CHARACTERS (CIERR 1101)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1102 MESSAGE VOLUME SET/CLASS REFERENCE NAME EXCEEDS 8
CHARACTERS (CIERR 1102)
CAUSE The reference name specified exceeds eight
characters.
ACTION Reenter the command making sure the reference name
specified is less than or equal to eight
characters.
---------------------------------------------------------------
1103 MESSAGE VOLUME SET/CLASS REFERENCE REDUNDANTLY SPECIFIED.
LAST OCCURRENCE USED (CIWARN 1103)
CAUSE The VOLUME SET/CLASS reference was specified more
than once.
ACTION None. Information only. The last reference name
specified was used.
---------------------------------------------------------------
1104 MESSAGE SPAN KEYWORD OUT OF CONTEXT (CIERR 1104)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1105 MESSAGE VOLUME SET/CLASS REFERENCE NOT FOUND (CIERR 1105)
CAUSE The VOLUME SET/CLASS reference specified was not
found.
ACTION Reenter the command making sure the VOLUME
SET/CLASS reference specified is valid.
---------------------------------------------------------------
1106 MESSAGE ILLEGAL OPERATION WHILE BOUND TO HOME VOLUME SET
(CIERR 1106)
CAUSE Same as the message.
ACTION Alter the group volume set specification before
performing the operation.
---------------------------------------------------------------
1107 MESSAGE ILLEGAL OPERATION WHILE GROUP FILE DOMAIN NOT
EMPTY (CIERR 1107)
CAUSE Same as the message.
ACTION Alter the group volume set specification before
performing the operation.
---------------------------------------------------------------
1108 MESSAGE VOLUME SET WAS NOT PREVIOUSLY MOUNTED (CIERR
1108)
CAUSE The volume set specified was not mounted when the
command was issued.
ACTION Make sure the volume set is mounted and reenter the
command.
---------------------------------------------------------------
1109 MESSAGE SPAN OPERATION FAILED, BUT HVS ASSIGNMENT
PERFORMED (CIWARN 1109)
CAUSE Same as the message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1110 MESSAGE LEVEL OF LISTVS NOT INTEGER. (CIERR 1110)
CAUSE Same as message content.
ACTION Reenter the LISTVS command making sure the level
specified is an integer.
---------------------------------------------------------------
1111 MESSAGE LEVEL OF LISTVS NOT BETWEEN -1 AND 2. (CIERR
1111)
CAUSE The level specified with the LISTVS command was not
between -1 and 2.
ACTION Reenter the LISTVS command making sure the level
specified is between -1 and 2.
---------------------------------------------------------------
1112 MESSAGE LISTVS ,-1 ON THIS REQUIRES SM CAPABILITY. (CIERR
1112)
CAUSE User does not have System Manager (SM) capability.
ACTION Ask your system manager to assign SM capability to
your user name.
---------------------------------------------------------------
1113 MESSAGE LISTVS, -1 ON THIS REQUIRES AM CAPABILITY. (CIERR
1113)
CAUSE User does not have Account Manager (AM) capability.
ACTION Ask your system manager to assign AM capability to
your user name.
---------------------------------------------------------------
1114 MESSAGE EXPECTED ";", FOLLOWED BY LIST FILE NAME. (CIERR
1114)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1115 MESSAGE FILE SYSTEM ERROR ! ENCOUNTERED ON LIST FILE.
(CIERR 1115)
CAUSE Same as the message.
ACTION Refer to the File System error message section.
---------------------------------------------------------------
1116 MESSAGE UNIDENTIFIABLE VOLUME SET NAME. (CIERR 1116)
CAUSE Same as the message.
ACTION Verify the volume set name with your system
manager.
---------------------------------------------------------------
1117 MESSAGE ONLY 3 PARAMETERS TO LISTVS. (CIERR 1117)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1118 MESSAGE MAX ALLOWABLE VOLUME SET MEMBERS (8) EXCEEDED.
(CIERR 1118)
CAUSE Same as message content.
ACTION Reenter the command making sure that the number of
volume set members specified is less than or equal
to eight.
---------------------------------------------------------------
1119 MESSAGE DUPLICATE VOLUME SET MEMBER WAS SPECIFIED. (CIERR
1119)
CAUSE A volume set member name was specified more than
once.
ACTION Reenter the command making sure the volume set
member names are specified once only.
---------------------------------------------------------------
1120 MESSAGE DUPLICATE VOLUME CLASS MEMBER WAS SPECIFIED.
(CIERR 1120)
CAUSE A volume class member name was specified more than
once.
ACTION Reenter the command making sure the volume class
member names are specified once only.
---------------------------------------------------------------
1121 MESSAGE SPECIFIED VSNAME IS NOT A SET DEFINITION ENTRY.
(CIERR 1121)
CAUSE Same as the message.
ACTION Verify the volume set name with your system
manager.
---------------------------------------------------------------
1122 MESSAGE SPECIFIED VCNAME IS NOT A CLASS DEFINITION ENTRY.
(CIERR 1122)
CAUSE Same as the message.
ACTION Verify the vcname with your system manager.
---------------------------------------------------------------
1123 MESSAGE SPAN OPERATION FAILED. (CIERR 1123)
CAUSE Same as the message.
---------------------------------------------------------------
1125 MESSAGE SPAN PARAMETER NOT OPTIONAL IN THIS CONTEXT. VS
PARAMETER IGNORED. (CIWARN 1125)
CAUSE Same as message content.
ACTION Information only.
---------------------------------------------------------------
1126 MESSAGE ERRORS WHILE ACCESSING PRIVATE VOLUME SETS:
(CIERR 1126)
CAUSE Same as message content.
ACTION Reenter the command.
---------------------------------------------------------------
1127 MESSAGE DATA-SEGMENT NOT AVAILABLE -- RETRY COMMAND
(CIERR 1127)
CAUSE Same as message content.
ACTION Reenter the command.
---------------------------------------------------------------
1128 MESSAGE INSUFFICIENT VIRTUAL DISK SPACE -- RETRY COMMAND
(CIERR 1128)
CAUSE Same as message content.
ACTION Reenter the command.
---------------------------------------------------------------
1129 MESSAGE TOO MANY VOLUME SETS ACCESSED (CIERR 1129)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1130 MESSAGE SYSTEM ERROR -- REPORT TO SYSTEM MANAGER (CIERR
1130)
CAUSE Internal error.
ACTION Notify your system manager.
---------------------------------------------------------------
1150 MESSAGE THE VS= PARAMETER IS NO LONGER SUPPORTED. (CIWARN
1150)
CAUSE Same as the message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1151 MESSAGE ONVS SUPERCEDES HOMEVS. (CIWARN 1151)
CAUSE Same as message content.
ACTION Information only.
---------------------------------------------------------------
1152 MESSAGE THE HOMEVS= PARAMETER IS NOT ALLOWED. (CIWARN
1152)
CAUSE Same as message content.
ACTION Information only.
---------------------------------------------------------------
1153 MESSAGE THE VS= PARAMETER IS NOT ALLOWED. (CIERR 1153)
CAUSE Same as message content.
ACTION Reenter the command without the VS= parameter.
---------------------------------------------------------------
1154 MESSAGE THE ONVS PARAMETER IS NOT ALLOWED WITH USER.
(CIWARN 1154)
CAUSE Same as the message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1155 MESSAGE THE VS NAME IS TOO LONG. (CIERR 1155)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1156 MESSAGE EXTRA DELIMITER HAS BEEN IGNORED. (CIWARN 1156)
CAUSE Syntax error.
ACTION None. Information only.
---------------------------------------------------------------
1157 MESSAGE EXPECTED ;PASS. (CIERR 1157)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1158 MESSAGE PASS HAS BEEN SPECIFIED MORE THAN ONCE. (CIWARN
1158)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1159 MESSAGE ONVS HAS BEEN SPECIFIED MORE THAN ONCE. (CIWARN
1159)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1160 MESSAGE CV CAPABILITY REQUIRED TO USE ONVS=. (CIERR 1160)
CAUSE User does not have Create Volumes (CV) capability.
ACTION Ask your system manager to assign CV capability to
your user name.
---------------------------------------------------------------