HP 3000 Manuals HP 3000 Manuals
PURGELDEV
Purges LDEVs from a DTC card.
Syntax
{dtcname}
PURGELDEV {dtc-nodename} [filename]
{station-address}
Parameters
dtcname The NMMGR nametag for the DTC being accessed. The
nametag is the last name in the pathname of the DTC.
For example, the dtcname is DTC01 in the pathname
DTS.DTC.SELECT.DTC01. The dtcname in a one to eight
character alphanumeric string.
dtc-nodename The nodename of the DTC that has been configured at
the DTC nametag path. The name must conform to the
NODENAME.ORGANIZATION.DOMAIN format. The name is a
five to fifty character alphanumeric string.
station-address The hexadecimal station of the DTC being accessed.
filename A text file that contains the LDEVs to be added or
purged. The file name's format is:
filename[.groupname[.accountname]]
A file lockword may not be specified. The contents
of the file must be formatted as described below.
Description
This command purges the selected LDEVs from the cards in the DTC's
configuration. The first DTC found that matches the selection criteria
will be operated on. For example, this could occur if more that one DTC
is configured with the same station-address.
LDEVs for one of more cards can be entered on each invocation of this
command. If you don't specify a filename you will be prompted with the
ADDLDEV>prompt. The format or each entry depends on the card type. The
format for each entry is:
LDEV[,] cardno[,] [# my comment ]
All text following the options number sign "#" will be interpreted as a
comment.
See also ADDLDEV and LISTLDEV.
Example
NMMGR> PURGELDEV dtc01.ind.hp
Enter LDEVs; (ldev, cardno)
PURGELDEV> 100, 1,;
PURGELDEV> 101, 1;
PURGELDEV> 102, 1;
PURGELDEV> 201, 2,
NMMGR>