HP 3000 Manuals

Using the Node Management Services (NMS) Utilities

CARDCONF 

Sets the current DTC card number so that the correct card is displayed or
updated by the READALLCONF, READCONF, UPDATECONF, and WRITECONF commands.

Syntax 

CARDCONF cardno

Parameters 

cardno                A number corresponding to the slot number of the
                      DTC that contains the DTC card to be acted on.  The
                      number must be between 0 and 5.

Description 

CARDCONF sets the current card number for a path referencing a DTC card
screen.  If the current path identifies a DTC configuration, the commands
READALLCONF, READCONF, UPDATECONF , and WRITECONF operate on data
associated with a specific card in the DTC, as identified by the CARDCONF
command.

The CARDCONF command must be specified before a PATHCONF command for a
DTC card screen.

Example 

NMMGR>CARDCONF 1

(Sets the current DTC card number to 1.)

NMMGR>PATHCONF DTS.DTCPC.SELECT.DTC01.CARD012

(Sets the current path to the data screen that contains data for cards 0,
1, and 2 of DTC01.)

MPE/iX 5.0 Documentation