HP 3000 Manuals

Configuring Systems for Terminals, Printers, and Other Serial Devices

Copy the Sample File 

Network information is stored in a configuration file called
NMCONFIG.PUB.SYS. If you do not already have a NMCONFIG.PUB.SYS 
file, create a copy of NMCONFIG.PUB.SYS from the sample configuration
file supplied on the HP 3000, NMSAMP1.PUB.SYS.

To copy NMSAMP1.PUB.SYS into NMCONFIG.PUB.SYS, enter these commands at
the MPE/iXprompt (:):

                                 Table 5-1.   

-----------------------------------------------------
|  |                                                |
|  | HELLO MANAGER.SYS,PUB                          |
|  |                                                |
-----------------------------------------------------
|  |                                                |
|  | FILE CONFIG=NMCONFIG.PUB.SYS;DEV=1             |
|  |                                                |
-----------------------------------------------------
|  |                                                |
|  | FCOPY FROM=NMSAMP1.PUB.SYS;TO=*CONFIG;NEW      |
|  |                                                |
-----------------------------------------------------


NOTE  "DEV=1" must be specified in the FILE equation to specify that the
      NMCONFIG.PUB.SYS file is to be stored to system disk 1.

MPE/iX 5.5 Documentation